FEIG – ID ANT800/600-DA
The ID ANT800/600-DA HF Loop Antenna is a versatile and high-performance antenna designed for use with HF readers. With a read range of up to 100 cm and a transmitting power of 8 W, this antenna is capable of delivering reliable and efficient RFID communication. Its easy setup, integrated dynamic antenna tuner, and IP65 protection class make it suitable for various applications.
Specification
- Dimensions: 852 mm x 620 mm x 40 mm
- Weight: approximately 2.5 kg
- Housing: Plastic ABS
- Color: Black
- Protection class: IP65
- Operating temperature range: -25 degree C up to +55 degree C
- Storage temperature range: -25 degree C up to +60 degree C
- Relative air humidity: 5% up to 95% (not condensing)
- Operating frequency: 13.56 MHz
- Max. transmitting power: 8 W
- Permitted transmitting power:
- EU (EN 300 330): 4 W
- USA (FCC Part 15): 2 W
- Canada (RSS-210): 2 W
- Read range: up to 100 cm*
- Antenna connection: 1 x SMA plug (50 ohm)
- Antenna connection cable: RG58, 50 ohm, approximately 3.6 m
Benefits
The ID ANT800/600-DA can be used with several HF readers, providing flexibility and compatibility for various RFID applications.
The antenna features an integrated dynamic antenna tuner (ID DAT), allowing for easy setup and tuning in different ambient conditions.
With a transmitting power of up to 8 W and a read range of up to 100 cm, this antenna delivers reliable and efficient RFID communication for enhanced operational efficiency.
Related Products
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID ANT.U75/50 is a UHF antenna designed for short read ranges. It operates at frequencies of 865-868 MHz and 902-928 MHz, making it suitable for use with the UHF Reader module ID MU02-02 and the Mid Range Readers ID MR(M)U102. With its compact design and low installation depth, it is an ideal choice for applications requiring a compact UHF antenna.
- Dimensions: 75 mm x 50 mm x 3 mm
- Connection: U.FL connector
- Operating frequencies: 865-868 MHz (EU), 902-928 MHz (FCC)
- Impedance: 50 ohm
- Maximum input power: 300 mW
- Read range:
- Far Field Tags: up to 20 cm
- Near Field Tags: up to 4 cm
- Gain: -20 dBi (linear)
- SWR:
- EU: <5:1
- FCC: < 2.0:1
The ID ANT40/30 and ID ANT100/100 are HF antennas designed for RFID proximity readers. They have an impedance of 50 ohm and operate at a frequency of 13.56 MHz. The antennas have a maximum transmitting power of 1 W and a data transfer rate of up to 424 kbits/s. The ID ANT100/100 has a reading distance of up to 14 cm. These antennas are suitable for applications such as eTicketing, eMobility, and Closed Loop Payment.
- Dimensions: ID ANT40/30 – 40 mm x 30 mm, ID ANT100/100 – 100 mm x 100 mm
- Interface: 2-pin connector or U.FL connector option
- Operating frequency: 13.56 MHz
- Impedance: 50 ohm
- Max. transmitting power: 1 W
- Max. reading distance: ID ANT40/30 – up to 7 cm, ID ANT100/100 – up to 14 cm
- Data transfer rate: ID ANT40/30 – up to 424 kbit/s, ID ANT100/100 – up to 212 kbit/s
- Power supply: Unneeded
- Temperature range: Operation -25 degree C up to +70 degree C, Storage -40degree C up to +85 degree C
- Relative air humidity: 0% up to 95% (non-condensing)
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g
The 4 Channel Antenna Multiplexer (ID CPR.ANT.MUX-M4) is a device that allows the connection of up to 4 external antennas to the reader module ID CPR74. With this multiplexer, it is possible to create up to 5 reading areas by utilizing the internal antenna of the ID CPR74. The control of each active antenna can be easily configured through the CPR74 or via two digital inputs with external control electronics. The multiplexer features non-wearing electronic switching of the outputs and has a high switching speed of less than 1 ms.
- Weight: 12 g
- MTBF (Mean Time Between Failures): 500,000 hours
- Power supply: +5 V DC ± 5%
- Current consumption: Less than 40 mA
- Digital inputs: Low level: 0 -0 V, High level: 3.8 V – VCC, Pull-Down: 10 kohm
- LED: 4 yellow LEDs for indicating active antennas
- Operating frequency: 13.56 MHz
- RF power: Maximum 500 mW
- Reader connection: U.FL connector
- Antenna connection: 4 x U.FL connectors for external antennas
- Temperature range: Operation: -25 degree C up to +70 degree C, Storage: -40degree C up to +85 degree C
- Relative air humidity: Maximum 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364, Environment: WEEE-2002/96/EC, RoHS-2011/65/EC
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)