Times-7 – A1001 Near-Field Antenna
The A1001 Near-Field Antenna is a compact and high-performance UHF RFID antenna designed for applications requiring precision in enclosed or tight spaces. Its small footprint and wideband functionality (864-928 MHz) make it ideal for environments such as retail, public transport, and any scenario where close-range RFID detection is essential. The A1001 significantly reduces stray tag reads, offering a reliable, cost-effective RFID solution for near-field/short-range needs. Its durability and compact design make it a versatile choice for industries requiring high accuracy in reading RFID-enabled items while minimizing read errors and enhancing operational efficiency.
Specification
- Frequency Range: 864-928 MHz (wideband)
- VSWR:4 typical
- Impedance: 50ohm
- Maximum Input Power: 3W
- Anti-Static Protection: DC grounded
- Detection Resistance: 10K ohm
- Dimensions: 82 x 82 x 9.6mm (3.2 x 3.2 x 0.3 in)
- Weight: 0.05kg (0.1 lbs)
- Casing: Moulded ABS housing
- Environmental Rating: IP54
- Operating Temperature: 0degree C to +50degree C (32F to 122F)
- Storage Temperature: -30degree C to +60degree C (-22F to 140F)
- Connector Type: SMA Female, centered
Benefits
The A1001’s compact size makes it ideal for tight or enclosed spaces where a small footprint is crucial, ensuring accurate RFID tag reading without taking up much room.
Engineered for near-field detection, the A1001 minimizes stray tag reads, ensuring only targeted RFID tags within close proximity are read, increasing system accuracy.
Operating across a wide frequency range (864-928 MHz), the A1001 offers flexibility for various global RFID standards, making it suitable for multiple applications such as retail, mass transit, and more.
Related Products
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The ID ANT.U280/210 is a versatile UHF flat-panel antenna, engineered for peak performance in compact spaces. With a height of just 8mm, this ultra-flat antenna delivers a robust reading range of up to 4 meters, making it ideal for Smart Shelf applications and environments with limited installation space. Its circular polarization ensures optimal performance, while integrated mounting holes allow for easy installation on any flat surface. The ID ANT.U280/210 is constructed from durable, fire-retardant ABS material and features an IP54 protection rating, ensuring reliable operation in various industrial, production, and retail environments. Compatible with several FEIG UHF readers, this antenna is designed to meet the demanding requirements of modern RFID applications.
- Dimensions: 275 mm x 214 mm x 8 mm
- Weight: 500 g
- Housing: ABS, fire-retardant
- Color: Black
- Protection Class: IP54
- Gain: Approx. 5 dBic
- 3 dB Beam Width: 60 x 80
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
- EU Variant: 865 MHz – 868 MHz
- FCC Variant: 902 MHz – 928 MHz
- Temperature Range:
- Operation:-20 degree C to +55 degree C
- Storage:-30 degree C to +65 degree C
- Compatibility:
- ID LRU500i UHF Long Range Reader (with cable type B)
- ID MAX.U500i
- ID LRU1002 UHF Long Range Reader (with cable type A)
- ID LRU3000/ID LRU3500
- ID MAX.U1002
- ID MRU102 UHF Mid Range Reader (with cable type A)
- ID MRMU102 UHF Mid Range Reader Module (with cable type A)
- Accessories:
- ID ANT.C2-A UHF antenna cable SMA / SMA 2 m
- ID ANT.C2-B UHF antenna cable SMA / TNC 2 m
- ID ANT.C6-A UHF antenna cable SMA / SMA 6 m
- ID ANT.C6-B UHF antenna cable SMA / TNC 6 m
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C
The 4 Channel Antenna Multiplexer (ID CPR.ANT.MUX-M4) is a device that allows the connection of up to 4 external antennas to the reader module ID CPR74. With this multiplexer, it is possible to create up to 5 reading areas by utilizing the internal antenna of the ID CPR74. The control of each active antenna can be easily configured through the CPR74 or via two digital inputs with external control electronics. The multiplexer features non-wearing electronic switching of the outputs and has a high switching speed of less than 1 ms.
- Weight: 12 g
- MTBF (Mean Time Between Failures): 500,000 hours
- Power supply: +5 V DC ± 5%
- Current consumption: Less than 40 mA
- Digital inputs: Low level: 0 -0 V, High level: 3.8 V – VCC, Pull-Down: 10 kohm
- LED: 4 yellow LEDs for indicating active antennas
- Operating frequency: 13.56 MHz
- RF power: Maximum 500 mW
- Reader connection: U.FL connector
- Antenna connection: 4 x U.FL connectors for external antennas
- Temperature range: Operation: -25 degree C up to +70 degree C, Storage: -40degree C up to +85 degree C
- Relative air humidity: Maximum 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364, Environment: WEEE-2002/96/EC, RoHS-2011/65/EC
The ID ANT.MUX/ ID ANT.MUX.M8is an HF 8 channel Multiplexer that allows for the operation of up to 8 antennas with just one reader. It facilitates communication between the reader and the multiplexer via an antenna cable. The outputs of the multiplexer can be controlled by the reader, a host, or digital inputs. It features non-wearing electronic switching of the outputs and has a high switching rate of less than 1 ms. The multiplexer is available in a housing or as a module, with options for 8 channel or 4 channel configurations.
- Dimensions (w x h x d): 182 x 110 x 90 mm
- Weight: approximately 550 g
- Housing: Plastic ASA, with screwed plexiglas lid
- Protection class: IP65
- Operating frequency: 13.56 MHz
- Grommet: 12 x screwed cable gland M16 x 5
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 2x input (SMA jack), 8x output (SMA jack)
- RF switch: electronic switch with switching speed less than 1 ms
- Triggering: Reader via RF input 1, external pulse generator via digital input
- Digital inputs: 1x optocoupler (max. 24 V DC / 20 mA)
- Signal indicators: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C up to +65 degree C, Storage: -40 degree C up to +80 degree C
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)