SIVA – UNI™ Aerial Lite 4620 Waterproof UHF RFID Label
The SIVA UNI™ Aerial Lite 4620 is a single-use, waterproof UHF RFID label designed for high-volume supply chain and logistics applications where compact size, reliability, and cost efficiency are essential. With its small footprint and strong RFID performance, this label is ideal for cartons, parcels, plastic containers, and packaging units used throughout modern logistics and distribution networks.
Operating across global UHF RFID frequencies (865–928 MHz), the Aerial Lite 4620 delivers dependable read performance on non-metallic surfaces, supporting efficient scanning at dock doors, conveyors, sortation lines, and warehouse portals. The printable white PET face stock enables durable thermal transfer printing of barcodes, EPCs, serial numbers, shipment IDs, and logistics data, ensuring seamless integration with WMS, TMS, and ERP systems.
With an IP68 waterproof rating, excellent chemical resistance, and lightweight construction, the SIVA UNI™ Aerial Lite 4620 is optimized for fast-moving, high-throughput logistics operations where consistency and scalability matter.
Specification
RF Specification
-
Air Interface Protocol: ISO/IEC 18000-63:2015, EPCglobal Gen2v2
-
Operational Frequency: Global 865–928 MHz
-
IC Type: Impinj Monza M830
-
Memory Configuration:
-
EPC: 128 bit
-
TID: 96 bit
-
-
Read Range (2W ERP):
-
On plastic: up to 13 m (42.65 ft)
-
On cardboard: up to 9 m (29.52 ft)
-
-
Applicable Surfaces: Non-metallic materials
Physical Specification
-
Face Stock: Printable white PET (resin ribbon recommended)
-
Label Size: 46 × 20 × 0.2 mm (1.81″ × 0.79″ × 0.01″)
-
Adhesive: High-performance permanent adhesive with excellent substrate bonding
-
Delivery Format: 2000 labels per reel
-
Label Pitch: 30.48 mm (1.2″)
-
Core Inner Diameter: 76 mm (3″)
-
Weight: 0.42 g
-
Release Liner: White PET
Environmental Resistance
-
Operating Temperature: –20 °C to +70 °C (–4 °F to +158 °F)
-
Adhesive Service Temperature: –20 °C to +85 °C (–4 °F to +185 °F)
-
Application Temperature: +10 °C to +38 °C (+50 °F to +100.4 °F)
-
Ingress Protection: IP68 (waterproof and dustproof)
-
Chemical Resistance: No physical or performance degradation after exposure to:
-
Salt water (10% salinity)
-
Motor oil
-
Sodium hydroxide (10%)
-
Acetone
-
-
Storage Conditions: +23 °C / 50% RH
Benefits
Small footprint delivers reliable read ranges while fitting easily on parcels and cartons.
IP68-rated construction ensures dependable RFID performance in wet, humid, and demanding logistics environments.
Lightweight, printable, and cost-efficient—ideal for large-scale logistics, distribution, and e-commerce operations.
Related Products
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.
The Beontag Captura Flash is a fast-to-attach tamper-proof seal tag designed for logistics applications. It features a durable enclosure and is equipped with RAIN RFID / EPCglobal Gen2v2 technology. With an operational frequency of 865 – 928 MHz and an NXP UCODE 8m IC type, this tag offers reliable performance.
It has a memory configuration of EPC 96 bit, User 32 bit, and TID 96 bit, with a unique number encoded as a default in the EPC memory. The tag can be attached to assets with a maximum diameter of 12mm and has a read range of up to 12m when hanging from metal.
- Device Type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865 – 928 MHz
- IC type: NXP UCODE 8m
- Memory configuration: EPC 96 bit, User 32 bit, TID 96 bit
- EPC memory content: Unique number encoded as a default
- Read range (2W ERP):
- Hanging from metal: up to 12m / 40ft
- Hanging from plastic: up to 3m / 10ft
- Hanging from cable: up to 2m / 6ft
- Applicable surface materials: All surfaces, optimized for metal
- Tag materials: High quality engineering plastics
- Weight: 6g
- Delivery format: Single
- Amount in box: 150 pcs
- Dimensions:
- Open: 125.7mm x 20mm x 15mm (4.95″ x 0.78″ x 0.59″)
- Closed: 61mm x 20mm x 10mm (2.4″ x 0.78″ x 0.4″)
- Environmental resistance:
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Short term peak temperature: +130degree C / 266F for 10min
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- IP classification: IP68
- Washing resistance: Designed to tolerate standard industrial washing processes. Real environment testing recommended.
- Chemical resistance: No physical or performance changes in motor oil exposure (168h), sulfuric acid exposure (minutes), or NaOH exposure (minutes). Acetone should be avoided.
- Expected lifetime: Years in normal operating conditions