SIVA – VOYAGER™ Headlight TP M4QT – Tamper-Proof UHF RFID Label
The SIVA VOYAGER™ Headlight TP M4QT is a tamper-proof UHF RFID label engineered specifically for permanent identification of vehicle headlights and headlamps. Designed as a non-transferable security label, it enables reliable, contactless vehicle recognition without line-of-sight, even in outdoor and high-speed environments.
Optimized for polycarbonate and glass headlamp surfaces, the label features a conductive ink printed antenna tuned to deliver stable long-range RFID performance across global UHF frequencies (860–960 MHz). Integrated IR and UV light protection ensures long-term durability under constant exposure to sunlight and harsh automotive conditions.
Using the Impinj Monza M4QT RFID chip, the Headlight TP M4QT supports expanded user memory, making it suitable for vehicle authentication, access control, tolling, parking systems, and electronic vehicle registration where secure and durable identification is required.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C (Gen2v2)
-
Operational Frequency: Global 860–960 MHz
-
IC Type: Impinj Monza M4QT
-
Memory Configuration:
-
EPC: 128 bits
-
USER: 512 bits
-
Serialized TID
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 50 years
-
Read Range (2W ERP):
-
ETSI: up to 10.5 m (34.4 ft) on polycarbonate, 6.8 m (22.3 ft) on glass
-
FCC: up to 8.5 m (27.9 ft) on polycarbonate, 9 m (29.5 ft) on glass
-
-
Applicable Surfaces: Non-metallic surfaces (vehicle headlamps, glass, polycarbonate)
Physical Specification
-
Face Stock: Special transparent plastic film
-
Label Size: 100 × 12 × 0.2 mm (3.93″ × 0.47″ × 0.01″)
-
Adhesive: High-performance permanent adhesive with excellent bonding to glass and PC surfaces
-
Weight: 2.34 g
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Pitch on Reel: 20.32 mm (0.8″)
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter: 140 mm (5.51″)
Environmental Resistance
-
Operating Temperature: –20°C to +80°C (–4°F to +176°F)
-
Peak Temperature: +150°C (302°F) for 1 minute
-
Adhesive Service Temperature: –40°C to +85°C (–40°F to +185°F)
-
Recommended Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Humidity Resistance: Up to 95% RH
-
Water Resistance: IP67
-
Chemical Resistance: Resistant to chemical solvents and moisture
Benefits
Non-transferable construction ensures permanent attachment and clear evidence of tampering.
Conductive ink antenna delivers reliable UHF RFID read range on polycarbonate and glass surfaces.
Perfect for toll collection, parking management, access control, and electronic vehicle registration.
Related Products
The Beontag Ferrowave Flag is a versatile on-metal label designed for item-level asset and part tracking. It utilizes UHF RFID technology and operates on the EPCglobal Class1 Gen2 ISO 18000-6C air interface protocol. With a global operational frequency range of 865 – 928 MHz, this label offers excellent performance for tracking assets. The label features the Impinj Monza 4E IC type, which provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is optimized for use on metal surfaces but can also work on other materials.
The label can be attached to curved surfaces and has a read range of up to 12 meters on metal and 4 meters off metal. With its durable construction and resistance to various environmental conditions, the Beontag Ferrowave Flag is a reliable solution for asset tracking.
The Beontag Ferrowave Classic is an RFID on-metal label designed specifically for packaging and component tracking. It is a UHF RFID/EPCglobal Gen2v2 device that operates at frequencies of 865-869MHz (ETSI) and 902-928MHz (FCC). The label utilizes Impinj Monza R6-P, Impinj Monza 4E, or NXP UCODE 8m IC types, each with different memory configurations. The label’s electrical specification includes unique random EPC in every label for Monza R6-P and NXP UCODE 8m, and the same EPC in every label for Monza 4E. The read range varies depending on the surface material, with ranges of up to 12m for glass, 5m for plastic, 4m for metal, and 2m for liquid.
The label is printable on white PET with a high-performance acrylic adhesive for easy installation. It weighs only 0.8g and comes in a reel format with 800 good labels. The Beontag Ferrowave Classic is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperatures of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It is compatible with various printers, including Zebra, Sato, and Printronix models.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Crosswave Classic is a dual-dipole label designed for logistics applications, offering excellent reading performance and a consistent radiation pattern. This UHF RFID label operates at a global frequency range of 860-960MHz and utilizes the Impinj Monza 4E IC for efficient and reliable performance. With a memory configuration of EPC 496 bit, TID 96 bit, and User 128 bit, this label provides ample storage capacity for tracking and identification purposes. The Beontag Crosswave Classic offers a read range of up to 10 meters on plastic and cardboard surfaces, making it suitable for a variety of non-metallic materials.
With its 360° readability, this label ensures constant reading performance in all orientations, even when using a linear reader antenna. The tag materials consist of a matt coated paper face material with a general purpose permanent adhesive for secure attachment. Available in different dimensions and delivery formats, the Beontag Crosswave Classic is a reliable and versatile solution for logistics and tracking applications.
The Beontag Carrier HF is a high-frequency RFID label designed for non-metallic surfaces. It is available in two variants: NTAG213 and SLIX2, which comply with NFC Forum Type 2 and Type 5 standards respectively. With an operational frequency of 13.56 MHz, this label offers reliable and secure communication. The Beontag Carrier HF is suitable for a wide range of applications, including asset tracking, inventory management, and supply chain optimization. Its key benefits include excellent read range, durable construction, and compatibility with various printing and encoding options.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.