SIVA – Reveal Sense-T 9928 – UHF RFID Temperature & Moisture Sensing Label
The SIVA Reveal Sense-T 9928 is a passive UHF RFID smart sensing label with an integrated temperature and moisture sensor, designed for continuous environmental monitoring across supply chains and industrial operations. It enables organizations to capture and retrieve temperature and humidity data wirelessly, without batteries, maintenance, or manual data logging.
Designed for cost-effective, high-volume deployment, the Sense-T 9928 is ideal for perishable goods, food and grain products, building materials, bulk materials, cold chain logistics, and data-center cooling monitoring. Each label can be applied at item, carton, or pallet level, allowing granular visibility of environmental conditions throughout storage and transit.
The label features a printable PET face stock, permanent acrylic adhesive, and a compact, elongated form factor, making it easy to integrate into existing RFID labeling and printing workflows while delivering reliable sensor and RFID performance.
Specification
RF & Sensor Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder with Sensor
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 860–960 MHz
-
IC Type: Magnus®-S3 M3D Sensor IC
-
Memory Configuration:
-
64-bit unique Tag ID (read-only)
-
EPC: 128 bits
-
User Memory: 128 bits
-
-
Write Cycle Endurance: 10,000 cycles
-
Data Retention: Up to 10 years
-
Read Range (2W ERP):
-
Plastic: up to 7 m (22.96 ft)
-
Glass: up to 7 m (22.96 ft)
-
Cardboard: up to 6 m (19.68 ft)
-
-
Applicable Surfaces: Non-metallic materials
Physical Specification
-
Face Stock: Printable PET
-
Label Size: 99 × 28 × 0.2 mm (3.89″ × 1.10″ × 0.01″)
-
Adhesive: Permanent acrylic adhesive
-
Weight: 0.68 g
-
Delivery Format: Roll
-
Labels per Roll:
-
Standard: 2000
-
Mini: 500
-
-
Label Pitch: ~34.29 mm
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter:
-
Standard: 160 mm (6.29″)
-
Mini: 107 mm (4.21″)
-
Environmental & Sensor Performance
-
Operating Temperature: –40°C to +85°C (–40°F to +185°F)
-
Temperature Measurement Range: –40°C to +85°C
-
Temperature Accuracy: ±0.5°C at 30°C
-
Peak Temperature Exposure:
-
+100°C for 1 hour
-
+80°C for 100 hours
-
-
Humidity Resistance:
-
95% RH at 60°C (100 h)
-
50% RH at 80°C (100 h)
-
-
Water Resistance: IP68 (tested for 5 hours at 1 m depth)
-
Chemical Resistance:
-
Salt water (10%)
-
Motor oil
-
Sodium hydroxide (10%)
-
Acetone (short exposure)
-
Benefits
Enables passive, battery-free monitoring of environmental conditions at item or pallet level.
Ideal for food, agriculture, building materials, bulk goods, and data-center cooling applications.
Supports high-volume deployment using standard UHF RFID infrastructure with minimal operational overhead.
Related Products
The Beontag Ironside Flex is a durable and versatile RAIN RFID tag designed for hard-to-tag items, offering industry-leading performance. This high-quality thermoplastic elastomer tag is optimized for a wide range of applications, including industrial and outdoor environments. Its robust design ensures reliable performance, even in extreme temperatures and harsh chemical exposures. With a read range of up to 20 meters, the Ironside Flex is ideal for assets made from various materials, including metal, making it an excellent choice for challenging environments. The tag can be attached using plastic cable ties or metallic wires.
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Carrier HF is a high-frequency RFID label designed for non-metallic surfaces. It is available in two variants: NTAG213 and SLIX2, which comply with NFC Forum Type 2 and Type 5 standards respectively. With an operational frequency of 13.56 MHz, this label offers reliable and secure communication. The Beontag Carrier HF is suitable for a wide range of applications, including asset tracking, inventory management, and supply chain optimization. Its key benefits include excellent read range, durable construction, and compatibility with various printing and encoding options.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)