SIVA – RE-LOAD PRO 9026 VDA – Industrial UHF RFID Label
The SIVA RE-LOAD PRO 9026 VDA is a VDA-compliant UHF RFID label specifically engineered for returnable transport item (RTI) management in the automotive industry. Designed to meet stringent automotive logistics standards, this RFID label delivers exceptional read performance, durability, and resistance to harsh industrial processes, including high-temperature chemical washing.
Optimized for reusable crates, totes, bins, trays, and automotive logistics containers, the RE-LOAD PRO 9026 VDA performs reliably even when applied near objects with high water content, a common challenge in closed-loop automotive supply chains. Its elongated form factor and tuned antenna provide long read ranges across global UHF frequencies, supporting fast identification at dock doors, conveyor systems, washing tunnels, and production lines.
With a printable white PET face stock and high-bond acrylic adhesive, this label integrates seamlessly into existing RFID printing and encoding workflows, enabling efficient asset identification, traceability, and compliance across multi-tier automotive logistics networks.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 865–928 MHz
-
IC Type: NXP UCODE 9XM
-
Memory Configuration:
-
EPC: 496 bits
-
TID: 96 bits
-
USER Memory: 752 bits
-
-
Read Range (2W ERP):
-
On plastic: up to 18 m (59 ft)
-
On cardboard: up to 16 m (52.5 ft)
-
-
Applicable Surfaces: Non-metallic materials
Physical Specification
-
Face Stock: Printable white PET (resin ribbon recommended)
-
Label Size: 90 × 26 × 0.2 mm (3.54″ × 1.02″ × 0.01″)
-
Adhesive: High-performance acrylic adhesive suitable for low-surface-energy plastics
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Label Pitch: 30.48 mm (1.2″)
-
Core Inner Diameter: 76 mm (3″)
-
Weight: 0.563 g
-
Release Liner: White PET
Environmental & Industrial Resistance
-
Operating Temperature: –35°C to +80°C (–31°F to +176°F)
-
Adhesive Service Temperature: –30°C to +80°C (–22°F to +176°F)
-
Recommended Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Ingress Protection: IP68 (tested for 5 hours at 1 m water depth)
-
Industrial Washing Resistance:
-
High-pressure washing (80–100 bar)
-
Water temperature up to 80°C
-
60° spray angle, 14–16 L/min flow
-
-
Chemical Resistance:
-
Salt water (10% salinity)
-
Sulphuric acid (10%, pH2)
-
Motor oil
-
Sodium hydroxide (10%)
-
Acetone (short exposure)
-
-
Storage Conditions: +22°C / 50% RH (1 year)
Benefits
Designed to meet automotive logistics standards for reusable transport item tracking and compliance.
Withstands high-temperature, high-pressure industrial washing and aggressive chemicals without performance loss.
Delivers up to 18 m read range on plastic, even near moisture-heavy contents and dense logistics flows.
Related Products
The Beontag Ironside Flex is a durable and versatile RAIN RFID tag designed for hard-to-tag items, offering industry-leading performance. This high-quality thermoplastic elastomer tag is optimized for a wide range of applications, including industrial and outdoor environments. Its robust design ensures reliable performance, even in extreme temperatures and harsh chemical exposures. With a read range of up to 20 meters, the Ironside Flex is ideal for assets made from various materials, including metal, making it an excellent choice for challenging environments. The tag can be attached using plastic cable ties or metallic wires.
The Beontag Ferrowave Flag is a versatile on-metal label designed for item-level asset and part tracking. It utilizes UHF RFID technology and operates on the EPCglobal Class1 Gen2 ISO 18000-6C air interface protocol. With a global operational frequency range of 865 – 928 MHz, this label offers excellent performance for tracking assets. The label features the Impinj Monza 4E IC type, which provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is optimized for use on metal surfaces but can also work on other materials.
The label can be attached to curved surfaces and has a read range of up to 12 meters on metal and 4 meters off metal. With its durable construction and resistance to various environmental conditions, the Beontag Ferrowave Flag is a reliable solution for asset tracking.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Carrier KLT is a UHF RFID label designed for returnable plastic containers, compliant with VDA recommendation 4500. This label utilizes Impinj Monza 4ETM IC technology and operates at a global frequency range of 860-960MHz. With a read range of up to 12.5m on plastic and 11m on cardboard, it is suitable for various non-metallic surfaces and can be used on boxes containing fruits, vegetables, groceries, liquid bottles, and utilities.
The label is resistant to water, chemicals, and extreme temperatures, making it ideal for a wide range of environments. With options for pre-encoding, customized printing, and over-lamination, the Beontag Carrier KLT offers flexibility and durability for asset identification and tracking.
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.