SIVA – RE-LOAD PRO 7320 DUO-FRE – Dual-Frequency UHF + NFC RFID Label
The SIVA RE-LOAD PRO 7320 DUO-FRE is a dual-frequency UHF + NFC RFID label designed for returnable transport items (RTIs), reusable packaging, and industrial assets that require both long-range identification and short-range interaction. By combining UHF RFID for automated logistics tracking with NFC for close-range scanning and customer engagement, this label enables seamless data flow across supply chains and digital touchpoints.
A key differentiator is its shared memory architecture, allowing both the UHF and NFC interfaces to access the same data set. This simplifies data management across warehouse systems, ERP platforms, mobile devices, and consumer applications, eliminating the need for duplicate records or synchronization layers.
Built to withstand high-temperature chemical washing and industrial handling, the RE-LOAD PRO 7320 DUO-FRE is ideal for closed-loop logistics, food & beverage crates, reusable containers, manufacturing RTIs, pooling systems, and smart asset identification where durability and data consistency are critical.
Specification
RF Specification
-
Device Type: Dual-Frequency Passive RFID Transponder (UHF + NFC)
-
Air Interface Protocols:
-
UHF: ISO/IEC 18000-63
-
HF/NFC: ISO/IEC 15693, ISO/IEC 18000-3
-
-
Operational Frequencies:
-
UHF: Global 865–928 MHz
-
NFC/HF: 13.56 MHz
-
-
IC Type: EM4425
-
Memory Configuration:
-
Shared configurable 2048-bit memory
-
UHF: 96-bit TID, up to 480-bit EPC/UII
-
NFC: 64-bit UID
-
Shared USER memory accessible by both UHF & NFC
-
-
Read Range (2W ERP):
-
On plastic: up to 8.5 m (27.9 ft)
-
On cardboard: up to 5.5 m (18 ft)
-
-
Applicable Surfaces: Non-metallic materials
Physical Specification
-
Face Stock: Printable white PET (resin ribbon recommended)
-
Label Size: 73 × 20 × 0.2 mm (2.87″ × 0.78″ × 0.01″)
-
Adhesive: High-performance acrylic adhesive with strong bonding to low-surface-energy plastics
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Label Pitch: 30.48 mm (1.2″)
-
Core Inner Diameter: 76 mm (3″)
-
Weight: 0.378 g
-
Release Liner: White PET
Environmental & Industrial Resistance
-
Operating Temperature: –20°C to +70°C (–4°F to +158°F)
-
Adhesive Service Temperature: –20°C to +85°C (–4°F to +185°F)
-
Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Ingress Protection: IP68 (tested for 5 hours at 1 m water depth)
-
Industrial Washing Resistance:
-
High-pressure washing: 80–100 bar
-
Water temperature: up to 80°C
-
Spray angle: 60°
-
Flow rate: 14–16 L/min
-
-
Chemical Resistance:
-
Salt water (10% salinity, 168 h)
-
Motor oil (168 h)
-
Sodium hydroxide (10%, 24 h)
-
Acetone (30 min exposure)
-
-
Storage Conditions: +23°C / 50% RH
Benefits
Enables long-range RTI tracking and short-range NFC interaction using a single durable RFID label.
One data set accessible via UHF readers and NFC smartphones reduces system complexity and integration effort.
Designed to withstand high-temperature, high-pressure washing and aggressive chemicals in closed-loop logistics systems.
Related Products
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag eKanban SLC is a single label designed for Small Load Carriers (SLC) that is compliant with VDA recommendations 4994 and 550. This UHF RFID label operates on the global frequency range of 860-928MHz and utilizes the Impinj Monza 4E IC. With a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit, this label offers a read range of up to 6 meters on plastic surfaces.
The label is made of thermal transfer printable paper with a yellow face color, and it is delivered on a reel with 600 pcs/reel. It is designed for short-term use and can withstand operating temperatures ranging from -20degree C to +70degree C. The Beontag eKanban SLC offers customer-specific encoding options and can be personalized with variable data printing.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 6 meters on plastic surfaces
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 80 mm x 0.2 mm / 8.19inchx 3.15inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short-term use, can last for years in normal operating conditions
- Personalization options: Pre-encoding, customer-specific visual printing
The Beontag Crosswave Neo is an RFID label designed for reliable logistics with a 360-degree read angle, combined with the performance of the latest IC generation. This label is ideal for use in various industries, including logistics, supply chain management, and inventory tracking. With its RAIN RFID / EPCglobal Gen2v2 device type and global operational frequency of 865-928MHz, the Beontag Crosswave Neo offers exceptional read range and accuracy.
Its unique random 96-bit EPC in every label ensures secure and reliable identification. The label is compatible with non-metallic surfaces and provides constant reading performance in all orientations, even when using a linear reader antenna. With its environmental resistance and short-term use design, the Beontag Crosswave Neo is a reliable solution for efficient and accurate logistics management.
The Beontag Carrier KLT is a UHF RFID label designed for returnable plastic containers, compliant with VDA recommendation 4500. This label utilizes Impinj Monza 4ETM IC technology and operates at a global frequency range of 860-960MHz. With a read range of up to 12.5m on plastic and 11m on cardboard, it is suitable for various non-metallic surfaces and can be used on boxes containing fruits, vegetables, groceries, liquid bottles, and utilities.
The label is resistant to water, chemicals, and extreme temperatures, making it ideal for a wide range of environments. With options for pre-encoding, customized printing, and over-lamination, the Beontag Carrier KLT offers flexibility and durability for asset identification and tracking.
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.