SIVA – EndurWave Pro 4515 UNI Series RAIN RFID Label
The SIVA EndurWave Pro 4515 is a microwave-resistant, washable RAIN RFID label engineered specifically for returnable and reusable food packaging applications where standard RFID labels would fail. Built on the Impinj M830 IC and operating globally at 865–928 MHz, it reads up to 17 m / 55.77 ft on plastic containers and withstands 50 wash cycles with detergents at water temperatures between 55°C and 75°C, plus 50 microwave cycles at up to 1800W. Its IP68 rating and operating temperature range of -40°C to +85°C make it suitable for cold chain environments, blast freezing, and hot food service cycles within the same label lifecycle.
The EndurWave Pro 4515 applies to plastic, glass, and ceramic food containers using a high-performance permanent adhesive, with a minimum bending diameter of 50 mm allowing application to curved container surfaces. At 45 x 15 x 0.2 mm on a printable white PET face material, it is compatible with 4-inch and 6-inch industrial thermal transfer UHF printers including Zebra ZT400 series, SATO CL4NX series, and Printronix T6000 series, enabling on-demand encoding and printing of logos, text, numbers, and barcodes in a single pass.
Each reel contains 2,000 good labels with defective labels marked for easy identification, packaged 2,000 pcs per box and 4 boxes per carton. Customer-specific EPC pre-encoding and custom printed artwork are available on request. The EndurWave Pro 4515 is RAIN RFID Alliance certified, CE marked, and UKCA certified, and is supplied under part number RF.EWP.4515.M830.
Specification
Physical Characteristics
- Label Size: 45 mm x 15 mm x 0.2 mm / 1.77 in. x 0.59 in. x 0.007 in.
- Face Material: Printable white PET (resin ribbon recommended)
- Adhesive: High performance adhesive; provides high bond to most surfaces
- Minimum Bending Diameter: 50 mm
- Label Pitch: 19.05 mm / 0.75 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 2,000 pcs good labels per reel; defective labels marked
- Packaging: 2,000 pcs per box; 4 boxes per carton
- Part Number: RF.EWP.4515.M830
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency: Global 865–928 MHz
- IC: Impinj M830
- Memory Configuration: EPC 128 bit; TID 96 bit
- Applicable Surface Materials: Non-metallic surfaces
Performance
- Read Range on Plastic (2W ERP): 17 m / 55.77 ft
- Read Range on Glass (2W ERP): 6 m / 19.68 ft
- Read Range on Ceramic (2W ERP): 8 m / 26.24 ft
Microwave Resistance
- Validated Cycles: 50 cycles at up to 1800W
- At 950W: Max. cook duration 5 minutes
- At 1200W: Max. cook duration 4 minutes
- At 1800W: Max. cook duration 2 minutes
- Label Placement: On the side of food packaging (not top or bottom)
- Minimum Product Volume: 8 oz / approx. 227 g
- Pass Criteria: No arching, no sparking, no ignition
Printer Compatibility
- Compatible Printer Types: 4 in. and 6 in. wide industrial grade thermal transfer UHF printers; sensor type Gap
- Tested Printers: Zebra ZT400 series; SATO CL4NX series; Printronix T6000 series
Environmental Ratings
- Operating Temperature: -40°C to +85°C / -40°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Washing Resistance: Tested to 50 cycles with detergents at 55°C to 75°C water temperature
- IP Classification: IP68
- Storage Condition: 1 year at +20°C / 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes in black
Regulatory Compliance
- RAIN RFID Alliance
- CE
- UKCA
Benefits
Validated to 50 microwave cycles at 1800W and 50 wash cycles at up to 75°C, the EndurWave Pro 4515 stays encoded and readable through the full reuse lifecycle of food containers without tag replacement.
An operating range of -40°C to +85°C covers blast freezing, refrigerated storage, and hot food service in a single label, eliminating the need for separate tags at different points in the cold-to-hot supply chain.
Compatibility with Zebra ZT400, SATO CL4NX, and Printronix T6000 printers means operations encode and print custom labels using equipment already in the facility, with no dedicated RFID printer investment required.
Related Products
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Ferrowave Micro is an RFID on-metal label specifically designed for short-term tracking of specialty retail items. With its small footprint and optimized performance on metal surfaces, this label is ideal for applications where tracking and identification of items is crucial. The label offers a read range of up to 4 meters on metal, making it highly efficient in inventory management and supply chain operations. Its compact size and durable construction ensure reliable performance in various environmental conditions.
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)