SIVA – Ferro MoM 8035 FCC RAIN RFID On-Metal Label
The SIVA Ferro MoM 8035 FCC is a RAIN RFID on-metal UHF label delivering 11 m / 36 ft read range directly on metal surfaces, with reliable performance also on plastic and liquid containers. Operating on the FCC 902–928 MHz band and built on the NXP UCODE 9xe IC with 128-bit EPC and 96-bit TID memory, it is designed for industrial asset tracking, equipment management, and inventory applications where labels must survive oil, salt water, and chemical exposure while remaining readable at long range.
At 80 x 35 x 1.39 mm with a large printable white PET face, the MoM 8035 provides significantly more print area than narrow on-metal labels, supporting full custom artwork, barcodes, text, and numbering in a single thermal transfer pass. Colour artwork with transparent over-lamination is available for orders of 10,000 units or more. The label is 100% performance checked before shipment, with 500 good labels per reel and spacer labels included for print head protection and ribbon stability.
IP68 rated and tested for 5 hours at 1 m depth, the MoM 8035 withstands 168 hours of salt water and motor oil exposure and 12 hours of NaOH exposure without physical or performance degradation, making it suited to manufacturing floors, outdoor yards, oil and gas environments, and wet processing facilities. It applies to flat and curved surfaces with a minimum bending diameter of 100 mm, and is printer-compatible with Zebra ZT411 On-Metal, SATO CL4NX Plus, and Printronix T6000e series printers. Customer-specific EPC pre-encoding is available on request under part number RF.LM.8035.F.U9xe.
Specification
Physical Characteristics
- Label Size: 80 mm x 35 mm x 1.39 mm / 3.15 in. x 1.37 in. x 0.05 in.
- Weight: 0.75 g
- Face Stock: Printable white PET (resin ribbon recommended)
- Adhesive: High performance adhesive with excellent adhesion to all surfaces
- Minimum Bending Diameter: 100 mm
- Label Pitch: 41.91 mm / 1.65 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 500 pcs good labels per reel; 100% performance checked; spacer labels included for print head protection and ribbon stability
- Packaging: 500 tags per roll; 4 rolls per carton
- Part Number: RF.LM.8035.F.U9xe
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (FCC): 902–928 MHz
- IC: NXP UCODE 9xe (other ICs available on request)
- Memory Configuration: EPC 128 bit; TID 96 bit
- Applicable Surface Materials: Optimised for metal; works on plastic and liquid containers
Performance
- Read Range on Metal (2W ERP): 11 m / 36 ft
- Read Range on Plastic (2W ERP): 6 m / 19.6 ft
- Read Range on Liquid Container (2W ERP): 7.5 m / 24.6 ft
Printer Compatibility
- Tested Printers: Zebra ZT411 On-Metal; SATO CL4NX Plus; Printronix T6000e series
- Compatible Printer Types: 4 in. and 6 in. wide industrial grade thermal transfer UHF printers
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Peak Temperature: +100°C / 212°F for 10 minutes
- Installation Temperature: +10°C to +38°C / +50°F to +100°F
- IP Classification: IP68 (tested for 5 hours in 1 m deep water)
- Chemical Resistance (no physical or performance changes): 168 hours salt water (salinity 10%) exposure; 168 hours motor oil exposure; 12 hours NaOH (10%) exposure
- Note: Acetone should be avoided
- Ideal Storage Condition: +23°C / 73.4°F at 50% RH; 1 year shelf life
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing (black): Customer-specific artwork including logo, text, numbers, and barcodes
- Colour Artwork: Colour imprint with transparent over-lamination available (MOQ 10,000 units)
Regulatory Compliance
- RAIN RFID Alliance
- RoHS
- CE
- UKCA
Benefits
At 11 m on metal, the MoM 8035 reads tagged assets across an entire warehouse aisle or equipment bay from a single fixed reader position, reducing the number of read points needed per zone.
The 80 x 35 mm printable face carries barcodes, asset numbers, logos, and text alongside the RFID inlay in one thermal transfer pass, eliminating the need for a separate paper identification label on the same asset.
Validated to 168 hours in motor oil and salt water at IP68, the MoM 8035 maintains full RF performance in outdoor yards, manufacturing floors, oil and gas facilities, and wet processing environments where standard labels degrade within days.
Related Products
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Carrier HF is a high-frequency RFID label designed for non-metallic surfaces. It is available in two variants: NTAG213 and SLIX2, which comply with NFC Forum Type 2 and Type 5 standards respectively. With an operational frequency of 13.56 MHz, this label offers reliable and secure communication. The Beontag Carrier HF is suitable for a wide range of applications, including asset tracking, inventory management, and supply chain optimization. Its key benefits include excellent read range, durable construction, and compatibility with various printing and encoding options.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.