SIVA – Contshare NFC 2525 NFC Label
The SIVA Contshare NFC 2525 is a square 25 x 25 mm printable NFC label built on the NXP NTAG213 IC, designed for authentication, content sharing, and product engagement applications where a compact, smartphone-readable label is required. Operating at 13.56 MHz and compliant with NFC Forum Type 2 and ISO/IEC 14443A, it carries 144 bytes of user memory and a 56-bit UID, making it suited for URL redirection, product authentication, loyalty programs, smart packaging, and interactive marketing on non-metallic surfaces including cardboard, plastic, glass, and paper.
At just 0.2 mm thick on a printable white PET face with high-performance permanent adhesive, the NFC 2525 applies cleanly to retail packaging, hang tags, product labels, event credentials, and consumer goods without altering the product’s appearance. Full bond strength is achieved within 24 hours of application, and the label supports a minimum bending diameter of 50 mm for curved surface use. Each reel contains 2,000 100%-tested labels with defective labels marked for easy identification, packaged 2,000 pcs per box and 4 boxes per carton.
The NFC 2525 is compatible with NFC-enabled thermal transfer printers for on-demand printing and encoding in a single pass. Customer-specific EPC user memory encoding, black custom artwork including logos, text, numbers, and barcodes, and colour artwork with transparent over-lamination (MOQ 10,000 units) are all available on request. It is supplied under part number RF.LI.NFC.2525.213, and alternative IC options are available on request.
Specification
Physical Characteristics
- Label Size: 25 mm x 25 mm x 0.2 mm / 0.98 in. x 0.98 in. x 0.007 in.
- Face Material: Printable white PET (resin ribbon recommended)
- Adhesive: High performance permanent adhesive; full bond strength achieved in 24 hours
- Minimum Bending Diameter: 50 mm
- Label Pitch: 30.48 mm / 1.2 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 2,000 pcs per reel; 100% performance checked; defective labels marked
- Packaging: 2,000 pcs per box; 4 boxes per carton
- Part Number: RF.LI.NFC.2525.213
RF Characteristics
- Air Interface Protocol: NFC Forum Type 2; ISO/IEC 14443A
- Operational Frequency: 13.56 MHz
- IC: NXP NTAG213 (other ICs available on request)
- Memory Configuration: USER 144 bytes; UID 56 bit
- Applicable Surface Materials: Non-metallic surfaces
Environmental Ratings
- Operating Temperature: -25°C to +70°C / -13°F to +158°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Storage Condition: 1 year at +20°C / 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific encoding of user memory
- Customized Printing (black): Customer-specific artwork including logo, text, numbers, and barcodes
- Colour Artwork: Colour imprint with transparent over-lamination available (MOQ 10,000 units)
Benefits
NFC Forum Type 2 compliance means any NFC-enabled smartphone taps and reads the NFC 2525 natively, triggering URLs, authentication checks, or content without requiring a dedicated app download from the end user.
At 25 x 25 mm, the NFC 2525 fits neatly on small retail labels, hang tags, cosmetic packaging, and product stickers where rectangular labels overhang or misalign, giving brand owners a clean, unobtrusive NFC touchpoint.
Compatibility with NFC-enabled thermal transfer printers lets operations print custom artwork and encode user memory simultaneously, eliminating a separate encoding step and reducing label production time on high-volume lines.
Related Products
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Crosswave Neo is an RFID label designed for reliable logistics with a 360-degree read angle, combined with the performance of the latest IC generation. This label is ideal for use in various industries, including logistics, supply chain management, and inventory tracking. With its RAIN RFID / EPCglobal Gen2v2 device type and global operational frequency of 865-928MHz, the Beontag Crosswave Neo offers exceptional read range and accuracy.
Its unique random 96-bit EPC in every label ensures secure and reliable identification. The label is compatible with non-metallic surfaces and provides constant reading performance in all orientations, even when using a linear reader antenna. With its environmental resistance and short-term use design, the Beontag Crosswave Neo is a reliable solution for efficient and accurate logistics management.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Beontag Captura Flash is a fast-to-attach tamper-proof seal tag designed for logistics applications. It features a durable enclosure and is equipped with RAIN RFID / EPCglobal Gen2v2 technology. With an operational frequency of 865 – 928 MHz and an NXP UCODE 8m IC type, this tag offers reliable performance.
It has a memory configuration of EPC 96 bit, User 32 bit, and TID 96 bit, with a unique number encoded as a default in the EPC memory. The tag can be attached to assets with a maximum diameter of 12mm and has a read range of up to 12m when hanging from metal.
- Device Type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865 – 928 MHz
- IC type: NXP UCODE 8m
- Memory configuration: EPC 96 bit, User 32 bit, TID 96 bit
- EPC memory content: Unique number encoded as a default
- Read range (2W ERP):
- Hanging from metal: up to 12m / 40ft
- Hanging from plastic: up to 3m / 10ft
- Hanging from cable: up to 2m / 6ft
- Applicable surface materials: All surfaces, optimized for metal
- Tag materials: High quality engineering plastics
- Weight: 6g
- Delivery format: Single
- Amount in box: 150 pcs
- Dimensions:
- Open: 125.7mm x 20mm x 15mm (4.95″ x 0.78″ x 0.59″)
- Closed: 61mm x 20mm x 10mm (2.4″ x 0.78″ x 0.4″)
- Environmental resistance:
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Short term peak temperature: +130degree C / 266F for 10min
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- IP classification: IP68
- Washing resistance: Designed to tolerate standard industrial washing processes. Real environment testing recommended.
- Chemical resistance: No physical or performance changes in motor oil exposure (168h), sulfuric acid exposure (minutes), or NaOH exposure (minutes). Acetone should be avoided.
- Expected lifetime: Years in normal operating conditions
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.