SIVA – Emporio Jewellery Tag RAIN RFID Label
The SIVA Emporio Jewellery Tag is a cost-optimised RAIN RFID label purpose-built for item-level tagging of jewellery and eyewear in retail environments. Operating globally at 865–928 MHz on the Impinj M830 IC with 128-bit EPC and 96-bit TID memory, it is engineered as a loop tag: the label is peeled from the liner, passed through the item such as a ring, bracelet, or eyewear frame, and folded back onto the adhesive side to form a secure loop, with the RFID transponder area kept clear of metal contact to preserve read performance. At 2 m / 6.56 ft free-air read range, it is suited for point-of-sale checkout, inventory counting, and loss prevention scanning in jewellery retail and optical store environments.
At 92 x 14 x 0.2 mm on a printable white PET face with high-performance adhesive, the Jewellery Tag provides a narrow, low-profile format that does not obscure item details or overwhelm small product packaging. It is compatible with both 4-inch and 6-inch wide industrial thermal transfer UHF printers as well as UHF desktop printers, using a gap sensor type for reliable label detection. Each reel contains 2,000 good labels with defective labels marked for identification, packaged 2,000 pcs per box and 4 boxes per carton on a standard 76 mm / 3-inch core, with 25.4 mm / 1-inch and 12.7 mm / 0.5-inch core options also available for desktop printer compatibility. Customer-specific EPC encoding and custom printed artwork including logos, text, numbers, and barcodes are available on request under part number RF.HT.Jy.9214.M830.
Specification
Physical Characteristics
- Label Size: 92 mm x 14 mm x 0.2 mm / 3.62 in. x 0.55 in. x 0.007 in.
- Face Material: Printable white PET (resin ribbon recommended)
- Adhesive: High performance adhesive
- Label Pitch: 28.575 mm / 1.125 in.
- Core Inner Diameter (standard): 76 mm / 3 in.; also available on 25.4 mm / 1 in. and 12.7 mm / 0.5 in. core ID
- Delivery Format: 2,000 pcs good labels per reel; defective labels marked
- Packaging: 2,000 pcs per box; 4 boxes per carton (for standard 3 in. core ID)
- Part Number: RF.HT.Jy.9214.M830
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency: Global 865–928 MHz
- IC: Impinj M830 (other ICs available on request)
- Memory Configuration: EPC 128 bit; TID 96 bit
- Applicable Surface Materials: Free air (loop application; RFID transponder area must not contact metal)
Performance
- Read Range in Free Air (2W ERP): 2 m / 6.56 ft
Printer Compatibility
- Compatible Printer Types: 4 in. and 6 in. wide industrial grade thermal transfer UHF printers; UHF desktop printers
- Sensor Type: Gap
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Storage Condition: 1 year at +20°C / 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
The narrow 14 mm width and 92 mm length allow the label to pass through small item loops and fold back on itself with the adhesive, creating a secure hang-tag style attachment that stays in place through handling and display without damaging the item.
With three core size options (76 mm, 25.4 mm, and 12.7 mm) and compatibility with both desktop and industrial UHF thermal transfer printers, the Jewellery Tag fits the encoding and printing setup already in most jewellery retail back-office and warehouse environments.
At 2 m free-air read range, the Jewellery Tag enables fast bulk inventory counts across display cases and stock drawers, and triggers reliable point-of-sale reads without the cashier needing to position each item precisely in front of a scanner.
Related Products
The Beontag Ironside Flex is a durable and versatile RAIN RFID tag designed for hard-to-tag items, offering industry-leading performance. This high-quality thermoplastic elastomer tag is optimized for a wide range of applications, including industrial and outdoor environments. Its robust design ensures reliable performance, even in extreme temperatures and harsh chemical exposures. With a read range of up to 20 meters, the Ironside Flex is ideal for assets made from various materials, including metal, making it an excellent choice for challenging environments. The tag can be attached using plastic cable ties or metallic wires.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Cruiser Windshield is a non-transferable tamper-evident label designed specifically for car windshields. This UHF RFID / EPCglobal Gen2v2 device operates at a global frequency range of 860-960MHz. It is equipped with either the Impinj Monza 4E or Alien Higgs 3 IC, depending on the customer’s preference. The memory configuration varies depending on the IC type, with the Monza 4E offering EPC 496 bit, User 128 bit, and TID 96 bit, while the Higgs3 offers EPC 96-496 bit, User 64-512 bit, and TID 96 bit. The read range of this label is up to 8 meters (26 feet) on windshields, making it suitable for various applications. It is compatible with glass surfaces and performs optimally in non-reflective environments. The tag materials used include PP with strong adhesion on the back side towards the windshield, and inkjet and thermal transfer printable PP on the front side towards the driver. The label weighs only 1g and comes in a delivery format of 1500 pieces on a reel. With a tag dimension of 92 x 26 x 0.2 mm, it is compact and unobtrusive.
The Beontag Cruiser Windshield is designed to withstand a wide range of temperatures, from -35degree C to +70degree C (-31F to +158F), ensuring its durability in various climates. It has an expected lifetime of several years under normal operating conditions. With options for pre-encoding, customized dual-sided full-color artwork, and customer-specific visual printing, this label offers flexibility and personalization. Installation instructions are provided to ensure optimal performance and longevity of the label. Overall, the Beontag Cruiser Windshield is a reliable and secure solution for car windshield labeling, providing tamper-evident protection and efficient identification.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E or Alien Higgs 3 (upon special request)
- Memory configuration:
- Monza 4E: EPC 496 bit, User 128 bit, TID 96 bit
- Higgs3: EPC 96-496 bit, User 64-512 bit, TID 96 bit
- Read range (2W ERP): Up to 8 m / 26 ft on windshields
- Applicable surface materials: Glass
- Tag materials:
- Back side (towards windshield): PP with strong adhesion on glass
- Front side (towards driver): Inkjet and thermal transfer printable PP
- Weight: 1g
- Delivery format: 1500 pcs on reel
- Pitch on reel: 33,866 mm / 1,333inch
- Reel core inner diameter: 76 mm / 3inch
- Tag dimensions: 92 x 26 x 0.2 mm / 3.62 x 02 x 0.01 in
- Operating temperature: -35degree C to +70degree C / -31F to +158F
- Ambient temperature: -35degree C to +70degree C / -31F to +158F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Personalization options: Pre-encoding, customized dual-sided full-color artwork, customer-specific visual printing
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)