SIVA – Rhino HT-HTP 7525 FCC RAIN RFID Hard Tag
The SIVA Rhino HT-HTP 7525 FCC is a hermetically sealed RAIN RFID hard tag constructed from PPS (polyphenylene sulfide) engineering polymer, designed for asset tracking in demanding North American industrial environments where parts undergo repeated high-temperature heating cycles of up to 180°C, exposure to acids, alkalis, and solvents, and prolonged submersion. Operating at FCC 902–928 MHz on the Alien Higgs 9 IC with 496-bit EPC, 48-bit TID, and 688-bit user memory, it delivers 9 m / 29.5 ft read range on metal, making it suited for industrial ovens, heat treatment lines, chemical processing, automotive paint and cure processes, and manufacturing environments operating under FCC frequency regulations.
Distinct from the Xtreme variant, the HT-HTP 7525 FCC uses a PPS housing rather than PEEK, providing continuous peak temperature tolerance of +180°C / +356°F and a 30-minute tolerance up to +200°C / +392°F, along with chemical resistance validated to 24 hours in hydrochloric acid (10%), sulfuric acid (10%), and sodium hydroxide (5%), and 72 hours in ethanol, acetone, and motor oil. Its IP68 rating is verified at 1 m depth for 5 hours. At 75 x 25 x 8.5 mm and 34 g with pre-moulded 3.5 mm holes, it mounts directly to metal using M3 screws or 3 mm pop rivets with flush contact required for optimal read performance. Vibration resistance is validated to JESD22-B103B service condition 2 on the z-axis. Each box contains 100 100%-tested tags, packaged 5 boxes per carton, under part number RF.HT.7525.F.H9. Customer-specific EPC and user memory pre-encoding are available on request.
Specification
Physical Characteristics
- Tag Size: 75 mm x 25 mm x 8.5 mm / 2.95 in. x 0.98 in. x 0.33 in.
- Hole Diameter: 3.5 mm / 0.13 in.
- Weight: 34 g
- Tag Material: PPS (polyphenylene sulfide)
- Adhesive: Not applicable
- Delivery Format: Single
- Tags per Box: 100 pcs (100% performance checked)
- Packaging: 100 pcs per box; 5 boxes per carton
- Part Number: RF.HT.7525.F.H9
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (FCC): 902–928 MHz
- IC: Alien Higgs 9
- Memory Configuration: EPC 496 bit; TID 48 bit; USER 688 bit
- Applicable Surface Materials: Metallic surfaces
Performance
- Read Range on Metal (2W ERP): 9 m / 29.5 ft
Installation Method
- Mechanical fixing: M3 screws or 3 mm pop rivets through pre-moulded holes
- Mechanical attachment strongly recommended for applications involving vibration, shock, or extreme temperatures
- Flush contact with metal surface required to avoid air gaps that may degrade read performance
Environmental Ratings
- Operating Temperature: -40°C to +85°C / -40°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Peak Temperature (continuous): +180°C / +356°F
- Peak Temperature (30 minutes): +200°C / +392°F
- Vibration Resistance: JESD22-B103B, service condition 2; vibration aligned with tag thickness (z-axis)
- IP Classification: IP68 (tested for 5 hours in 1 m deep water)
- Chemical Resistance (no physical or performance changes): 24 hours hydrochloric acid (10%) exposure; 24 hours sulfuric acid (10%) exposure; 24 hours sodium hydroxide (5%) exposure; 72 hours ethanol, acetone, and motor oil exposure
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific encoding of EPC memory and user memory available
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
The PPS housing and hermetic seal keep the tag intact and readable through paint cure ovens, heat treatment furnaces, and high-temperature assembly processes at up to 180°C continuously, removing the need to detag and retag parts before each production run.
The PEEK housing and hermetic seal allow the tag to stay permanently mounted on metal parts through powder coating ovens, heat treatment furnaces, and autoclave sterilisation cycles repeatedly, eliminating the cost and labour of removing and re-applying tags before each process run.
At 9 m on metal under FCC power limits, the HT-HTP 7525 FCC reads tagged parts from a full bay or line distance, enabling fixed readers to cover large work cells, conveyor spans, or storage racks without requiring workers to present tags individually to a scanner.
Related Products
The Beontag Heatwave Ultra is an RFID tag specifically designed for extreme temperature environments. With its exceptional temperature resistance and robust enclosure, this UHF RFID tag is ideal for applications where durability and reliability are crucial. The tag operates at both ETSI and FCC frequencies, allowing for global compatibility. It features the NXP UCODE 7xm+ IC, which provides excellent performance and reliability. The tag has a read range of up to 10 meters and is optimized for use on metallic surfaces. With its high-performance thermoplastic materials, the tag can withstand temperatures ranging from -35degree C to +85degree C.
It has been tested for peak temperatures of up to 235degree C and is resistant to various chemicals, including saltwater, motor oil, NaOh, sulfuric acid, and acetone. The Beontag Heatwave Ultra is IP68 rated, ensuring protection against dust and water ingress. With its long expected lifetime and multiple personalization options, this RFID tag is a reliable and versatile solution for a wide range of applications.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Crosswave Classic is a dual-dipole label designed for logistics applications, offering excellent reading performance and a consistent radiation pattern. This UHF RFID label operates at a global frequency range of 860-960MHz and utilizes the Impinj Monza 4E IC for efficient and reliable performance. With a memory configuration of EPC 496 bit, TID 96 bit, and User 128 bit, this label provides ample storage capacity for tracking and identification purposes. The Beontag Crosswave Classic offers a read range of up to 10 meters on plastic and cardboard surfaces, making it suitable for a variety of non-metallic materials.
With its 360° readability, this label ensures constant reading performance in all orientations, even when using a linear reader antenna. The tag materials consist of a matt coated paper face material with a general purpose permanent adhesive for secure attachment. Available in different dimensions and delivery formats, the Beontag Crosswave Classic is a reliable and versatile solution for logistics and tracking applications.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.