Times-7 – A5531C Circularly Polarized Ground Antenna — Low-Profile Tracking for People and Assets
The Times-7 A5531C is a circularly polarized ground antenna designed for tracking moving products, assets, and people in applications where traditional side-mounted antennas are unsuitable. At 10mm (0.4″) thick and 1.2m (4ft) long, it lies flat on the ground and can be concealed under a mat while still supporting payloads over 200kg (440lbs), including foot traffic, wheeled carts, and occasional vehicular traffic. RHCP polarization ensures reliable reads regardless of tag orientation as items pass overhead, making it well suited to conference and sporting event attendee tracking, race timing, and industrial asset tracking where locating missing components quickly keeps production moving. The A5531 range also includes vertical (A5531V) and horizontal (A5531H) linear polarization variants for applications requiring a fixed read orientation, all built in New Zealand and available in ETSI or FCC frequency bands.
Specification
Physical Characteristics
- Unboxed Dimensions: 47.24″ x 7.67″ x 0.39″ (1200 x 195 x 10mm)
- Boxed Unit Dimensions: 51.18″ x 13″ x 1.57″ (1380 x 330 x 40mm)
- Net Weight: 5.9 lbs (2.7kg)
- Gross Weight: 8.37 lbs (3.8kg)
- Thickness: 0.4″ (10mm)
- Length: 4ft (1.2m)
- Radome Material: Fire retardant ABS
RF Characteristics
- Frequency Range: 864-868 MHz / 902-928 MHz
- Polarization: RHCP (Right Hand Circularly Polarised)
- Nominal Impedance: 50Ω
- Maximum Input Power: 3W
Performance
- Far-Field Gain: 9.5dBiC typical
- Far-Field 3dB Beamwidth: 13° in XZ, 85° in YZ
- VSWR: 2.0 typical
- Front-To-Back Ratio: -18dB
- Anti-Static Protection: Yes, DC grounded
- Antenna Detection: 10kΩ resistance
- Maximum Point Load: 100 psi (7kg/cm²)
- Maximum Distributed Load: 1100 lbs (500kg)
- Payload Rating: Over 440 lbs (200kg)
Connectivity
- Connector Type / Position: SMA female side fly lead
- Cable Type / Length: 195 type / 11.7″ (298mm)
Environmental Ratings
- Environmental Rating: IP53
- Operating Temperature: 32°F to +122°F (0°C to +50°C)
- Storage Temperature: -22°F to +140°F (-30°C to +60°C)
Regulatory Compliance
- RoHS Compliant
- CE Compliant
- Built in New Zealand
Benefits
At just 0.4″ thick, the A5531C lies flat on the ground and can be concealed under a mat or covering, letting conference organizers and event staff track attendee movement without altering walkways or floor space.
Rated for point loads up to 100 psi and distributed loads up to 1100 lbs, the A5531C withstands hand trolleys, rubber-wheeled carts, runners, and bicyclists without antenna damage during continuous operation.
Circular polarization reads tags regardless of orientation as products or equipment move across the antenna, helping manufacturing and industrial sites locate missing components before they cause production delays.
Related Products
The ID PAD74-U is a compact and powerful USB pad reader designed for contactless data exchange with HF transponders. It features a defined capture window and a read range of up to 19 cm. With support for ISO 15693 and ISO 14443 transponders, it is suitable for applications like access control, user ID card detection, and book/document tracing in libraries and offices. The reader comes with 3 LEDs for optical feedback and is USB powered, making it easy to connect to a laptop or desktop PC.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.5 kg (1.2 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic blade
- Color: Pad in black, upper part in similar RAL 9003 (white)
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power: 400 mW ±1 dB
- Supply voltage: 5V DC (via USB)
- Power consumption: max. 2.5 W
- Interfaces: USB 2.0
- Indicator, optical: 3 LEDs (green, red, blue)
- Supported transponders: ISO 15693, ISO 14443-A/B, (ISO 18000-3 MODE 1)*
- Reader modes: ISO Host Mode, Scan Mode**
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Software development kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver: Windows Server 2012 and 2016, Windows 10 and 11; 32/64 Bit
The ID ANT240/180 Pad Antenna is a highly efficient and compact solution for contactless data exchange with RFID transponders. Its flat and sleek design allows it to seamlessly fit into desktop environments, making it ideal for file tracking, library applications, and office use. The antenna provides an impressive read range of up to 42 cm, ensuring reliable performance in close-range RFID applications. Equipped with an optical feedback feature via a blue LED, the antenna offers real-time operational status updates. It connects easily to RFID readers using the included coaxial cable, providing a hassle-free installation process.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 in x 7.09 in x 0.51 in)
- Weight: 0.36 kg (0.8 lbs)
- Housing: Upper part Plastic ABS, lower part Plastic plate
- Color: Black (Pad), White (Upper part, RAL 9003)
- Protection Class: IP30
- Operating Frequency: 13.56 MHz
- Max. Transmitting Power:5 W
- Antenna Connection: RG174 coaxial cable with SMA connector (50 ohm), 2.2 m long
- Indicator: 1 Blue LED for operational status (switchable via DC voltage)
- Operating Temperature: -25degree C to +55degree C (-13F to 131F)
- Storage Temperature: -25degree C to +70degree C (-13F to 158F)
- Relative Humidity: 5% to 95% (non-condensing)
- Standard Compliance: EMC EN 301 489, Safety & Health EN 62368-1, EN 50364
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g
The 4 Channel Antenna Multiplexer (ID CPR.ANT.MUX-M4) is a device that allows the connection of up to 4 external antennas to the reader module ID CPR74. With this multiplexer, it is possible to create up to 5 reading areas by utilizing the internal antenna of the ID CPR74. The control of each active antenna can be easily configured through the CPR74 or via two digital inputs with external control electronics. The multiplexer features non-wearing electronic switching of the outputs and has a high switching speed of less than 1 ms.
- Weight: 12 g
- MTBF (Mean Time Between Failures): 500,000 hours
- Power supply: +5 V DC ± 5%
- Current consumption: Less than 40 mA
- Digital inputs: Low level: 0 -0 V, High level: 3.8 V – VCC, Pull-Down: 10 kohm
- LED: 4 yellow LEDs for indicating active antennas
- Operating frequency: 13.56 MHz
- RF power: Maximum 500 mW
- Reader connection: U.FL connector
- Antenna connection: 4 x U.FL connectors for external antennas
- Temperature range: Operation: -25 degree C up to +70 degree C, Storage: -40degree C up to +85 degree C
- Relative air humidity: Maximum 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364, Environment: WEEE-2002/96/EC, RoHS-2011/65/EC
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)
The ATS200 is a sophisticated RFID handheld reader designed for seamless data collection and management in diverse industries. Its ergonomic design coupled with robust performance makes it an indispensable tool for inventory management, asset tracking, and logistics operations. With its intuitive interface and high-speed data processing capabilities, the ATS200 elevates operational efficiency to new heights.
The ATS200 is a compact and lightweight device, making it easy to carry and use in a variety of environments. It also has a long battery life, allowing it to be used for extended periods of time without requiring a recharge. It can be connected to a mobile device or computer for real-time data transfer and analysis. It is also equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows.