FEIG – ID LRU500i
The ID LRU500i is a compact UHF Long Range Reader with an integrated antenna and signal light. It is designed for numerous logistical applications, such as installing RFID reading points in the incoming/outgoing goods area and along conveyor belts. With a read range of up to 10 meters, it provides reliable and efficient RFID reading capabilities. The reader is housed in a robust and compact casing, making it suitable for both indoor and outdoor use. It also features secure key storage for application keys and fast and easy mounting and installation.
Specification
- Dimensions: 290 mm x 290 mm x 100 mm
- Weight: 2,800 g
- Housing: Plastic (ASA-PC), Aluminium
- Color: Anthracite, translucent
- Protection class: IP67
- Mounting: VESA FDMI MIS-D, 100 mm x 100 mm
- Power supply: 12 up to 24 V DC ±10 %, PoE+
- Power consumption: Typical 16 W (22 W with PoE+)
- Operating frequency: Variant EU – 865 MHz up to 868 MHz, Variant FCC – 902 MHz up to 928 MHz
- Output power: Radiated (int. antenna) – max. 2 W ERP, Conducted (ext. antenna) – max. 1 W, configurable in steps of 100 mW
- Antenna connector: 1x R-TNC-Jack (50 Ohm) (Reverse-TNC)
- RF-Diagnosis: RF-channel monitoring, Antenna SWR control, Internal Overheating Protection
- Outputs: 2 Optocoupler* (max. 24 V DC / 20 mA), 2 Relays* (max. 24 V DC / 1 A switching current, 2 A permanent current)
- Inputs: 2 Optocoupler (max. 24 V DC / 20 mA)
- Interfaces: Variant BD – RS485, USB (On-The-Go), Wiegand, Variant PoE – Ethernet, USB (On-The-Go)
- Reader modes: ISO Host Mode, Scan Mode, Notification Mode, Buffered Read Mode
- Supported transponders: RAIN RFID, EPC Class1 Gen2, EPC Class1 Gen2 V2, ISO 18000-6C, ISO 18000-63
- Indicator: Signal light with red/green/blue, 10 LEDs to indicate operation and antenna state
- Network services: TCP/IP, DHCP
- Other features: Anti-Collision, Output of RSSI values and phase angle, Battery-assisted real-time clock, Supports encrypted transponder communication, Secure Key Storage, Config Cloning function
- Temperature range: Operation -35 degree C up to +55 degree C**, Storage -25 degree C up to +85 degree C, Humidity 5 % up to 95 % (non-condensing), Vibration EN 60068-2-6 10 Hz to 150 Hz: 0.075 mm / 1 g, Shock EN 60068-2-27 Acceleration: 30 g
- Only applies to variant PoE. Variant BD offers no optocoupler output and only one relay output. ** Tested according to EN 60068-2-1; extended temperature range up to +70degree C on request
Benefits
The ID LRU500i offers a read range of up to 10 meters, allowing for efficient and reliable RFID reading in various logistical applications.
With its integrated circular-polarized antenna and signal light, the reader can read transponders from any orientation and provide visual feedback during the reading process. This ensures accurate and convenient operation.
The reader is housed in a robust and compact casing, making it suitable for both indoor and outdoor use. Its IP67 protection class ensures resistance to dust and water, providing durability in challenging environments.
Related Products
The Shielded HF Pad Antenna, ID ANTS370/270-A and ID SPAD102, is a contactless data exchange antenna designed for desktop applications in offices and libraries. It allows for traceability of files and documents, as well as detection of lendable items at check out or return points. With a read range of over 30 cm, these antennas offer outstanding performance and modern design.
- Dimensions: 376 mm x 276 mm x 27 mm (14.8 inch x 10.0 inch x 1 inch)
- Weight: approx. 2.0 kg (4.4 lbs)
- Housing: Acrylic glass pad, plastic SB upper part, zinced steel lower part
- Color: Transparent or black pad, similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG58 coaxial cable with SMA connector (50 ohm); approx. 2.3m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation: -25 degree C up to +55 degree C (-13 F up to 131 F), Storage: -25 degree C up to +70 degree C (-13 F up to 158 F)
- Relative air humidity: 5% up to 95% (non-condensing)
The ID SPAD.U is a shielded UHF desktop reader with integrated antennas, designed for contactless data exchange with UHF transponders. With its flat and modern design, it offers maximum reliability and excellent reading performance. It is suitable for various markets, including laundries, libraries, and retail, and can be used for applications such as laundry logistics, library item tracking, and file/document tracking.
- Dimensions: 376 mm x 276 mm x 26.8 mm
- Weight: approximately 2.0 kg
- Housing: Upper part – Plastic ABS, Cover plate – Acrylic glass (PMMA XT), Lower part – Galvanized metal sheet
- Protection class: IP30
- Power supply: 12 to 24 V DC ±15%
- Power consumption: max. 7 VA
- Operating frequency: 865 MHz to 868 MHz
- Transmitting power: 50 mW to 500 mW, configurable in up to 8 steps
- Interface: USB
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C (optional)
- Indicators: LED green, red, orange (mixed color), Buzzer
- Temperature range: Operation -25 degree C to +55 degree C, Storage -25 degree C to +70 degree C
- Relative humidity: 5% to 95% (non-condensing)
- Radio approval: Europe – EN 302 208, EMC – EN 301 489
- Safety: Low Voltage – EN 62368-1, Human Exposure – EN 50364
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The ID ANT240/180-A is a flat and compact pad antenna designed for contactless data exchange with RF RFID transponders. With a read range of up to 42 cm, it is suitable for use in enclosed spaces such as offices, libraries, and file tracking applications. The antenna features a sleek design and can be connected directly to a reader with an included coaxial cable.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.36 kg (0.8 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic plate
- Colour: Black pad and similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG174 coaxial cable with SMA connector (50 ohm); approx. 2.2m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)