FEIG – ID MAX50.10-xUSB
The ID MAX50.10-xUSB is a compact RFID card reader with an integrated access controller, designed for offline management of more than 5,000 access permissions. It combines the functions of a card reader, a door control, and access control in one device. With its fast Ethernet interface, it allows easy integration into IP-based network infrastructures. The AES-encrypted data ensures high system security, protecting against attacks. It supports various transponders and can examine either the serial number or user-selectable memory areas of the transponder.
Specification
- Dimensions: Card reader – 84 mm x 84 mm x 22 mm, Wall-mounted housing – 78 mm x 78 mm x 18 mm
- Weight: Approximately 150 g
- Housing: Plastic ASA corpus with acrylic glass front panel
- Protection class: IP54
- Supply voltage: External power supply 24 up to 48 V DC ±10%
- Operating frequency: 13.56 MHz
- RF transmitting power: 250 mW ±2 dB
- Antenna: Integrated, approximately 70 mm x 70 mm
- Interface: USB Full Speed (12 MBit/s)
- Memory: 14 FRAM for user data, EEPROM for configuration data
- Supported transponders: ISO 14443-A/-B, ISO 15693, NFC
- LEDs: 3x (blue, green, and red) with configurable function
- Buzzer: Integrated
- Real-time clock: 24 h power reserve; Accuracy: ±2 s/day
- Reading/writing distance: Typical 3 up to 10 cm*
- Temperature range: Operation -20 degree C up to +55 degree C, Storage -40 degree C up to +85 degree C
- Relative air humidity: 95% (non-condensing)
- Standard conformity: Radio license – EN 300 330 (Europe, UK), FCC 47 CFR Part 15 (USA), IC RSS-GEN, RSS-210, RSS-212 (Canada), EMC – EN 301 489, Safety – EN 60950, EN 50364, Others – RoHS, WEEE
Benefits
The ID MAX50.10-xUSB combines the functions of a card reader, a door control, and access control in one compact device, making it a cost-effective solution for personnel and vehicle access control.
The AES-encrypted data transfer ensures a high level of system security, protecting the access control infrastructure against attacks by intercepting or tampering.
With the ability to manage more than 5,000 access permissions and store approximately 2,000 access control events, the ID MAX50.10-xUSB can operate offline as a stand-alone device, providing flexibility and convenience.
Related Products
The ID ANT.U280/210 is a versatile UHF flat-panel antenna, engineered for peak performance in compact spaces. With a height of just 8mm, this ultra-flat antenna delivers a robust reading range of up to 4 meters, making it ideal for Smart Shelf applications and environments with limited installation space. Its circular polarization ensures optimal performance, while integrated mounting holes allow for easy installation on any flat surface. The ID ANT.U280/210 is constructed from durable, fire-retardant ABS material and features an IP54 protection rating, ensuring reliable operation in various industrial, production, and retail environments. Compatible with several FEIG UHF readers, this antenna is designed to meet the demanding requirements of modern RFID applications.
- Dimensions: 275 mm x 214 mm x 8 mm
- Weight: 500 g
- Housing: ABS, fire-retardant
- Color: Black
- Protection Class: IP54
- Gain: Approx. 5 dBic
- 3 dB Beam Width: 60 x 80
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
- EU Variant: 865 MHz – 868 MHz
- FCC Variant: 902 MHz – 928 MHz
- Temperature Range:
- Operation:-20 degree C to +55 degree C
- Storage:-30 degree C to +65 degree C
- Compatibility:
- ID LRU500i UHF Long Range Reader (with cable type B)
- ID MAX.U500i
- ID LRU1002 UHF Long Range Reader (with cable type A)
- ID LRU3000/ID LRU3500
- ID MAX.U1002
- ID MRU102 UHF Mid Range Reader (with cable type A)
- ID MRMU102 UHF Mid Range Reader Module (with cable type A)
- Accessories:
- ID ANT.C2-A UHF antenna cable SMA / SMA 2 m
- ID ANT.C2-B UHF antenna cable SMA / TNC 2 m
- ID ANT.C6-A UHF antenna cable SMA / SMA 6 m
- ID ANT.C6-B UHF antenna cable SMA / TNC 6 m
The UHF Mid-Range Antenna ID ANT.U150/150 by FEIG ELECTRONIC GmbH is a robust, compact, and aesthetically pleasing antenna designed for a variety of demanding environments. With a circular polarization that ensures optimal performance and reliable read ranges up to 4 meters, this antenna is ideal for logistics, industrial applications, railway systems, waste management, and retail inventory tracking. Its IP68 protection class makes it suitable for permanent outdoor use, even in harsh industrial settings. The ID ANT.U150/150 features a VESA100 standard mounting for easy installation and is compatible with multiple FEIG UHF readers, making it a versatile solution for efficient asset tracking and inventory management.
- Dimensions: 151 mm x 150 mm x 14.5 mm
- Weight: 230 g
- Housing: ABS, UV resistant, and fire-retardant
- Protection Class: IP68
- Gain: Approximately 5 dBic
- 3 dB Beam Width: 105 x 105
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
EU Variant: 865 Mz – 868 MHz
FCC Variant: 902 MHz – 928 MHz
The ID ANT.U75/50 is a UHF antenna designed for short read ranges. It operates at frequencies of 865-868 MHz and 902-928 MHz, making it suitable for use with the UHF Reader module ID MU02-02 and the Mid Range Readers ID MR(M)U102. With its compact design and low installation depth, it is an ideal choice for applications requiring a compact UHF antenna.
- Dimensions: 75 mm x 50 mm x 3 mm
- Connection: U.FL connector
- Operating frequencies: 865-868 MHz (EU), 902-928 MHz (FCC)
- Impedance: 50 ohm
- Maximum input power: 300 mW
- Read range:
- Far Field Tags: up to 20 cm
- Near Field Tags: up to 4 cm
- Gain: -20 dBi (linear)
- SWR:
- EU: <5:1
- FCC: < 2.0:1
The ID ANT.U290/290 and ID ANT.U580/290 are robust UHF RFID antennas designed for optimized reading performance. With circular polarization, these antennas allow for the identification of transponders in different orientations, enabling 3-dimensional identification in gate applications. They are suitable for both indoor and outdoor use, with a high protection class IP67 rating. These antennas have a modern and elegant design, and they are available in different dimensions and colors. They have TNC connectors and VESA connection for easy installation. The ID ANT.U580/290 has a 30° beam width, making it particularly suitable for vehicle identification and Free Flow Tolling systems.
- Dimensions (ID ANT.U290/290): 288 mm x 288 mm x 65 mm
- Dimensions (ID ANT.U580/290): 576 mm x 288 mm x 80 mm
- Housing: PC / Aluminium
- Color: Anthracite, translucent
- Weight (ID ANT.U290/290): 1,550 g
- Weight (ID ANT.U580/290): 3,850 g
- Protection class: IP67
- Gain (ID ANT.U290/290): Approx. 9 dBic
- Gain (ID ANT.U580/290): Approx. 11 dBic
- 3 dB beam width (ID ANT.U290/290): 65 x 65
- 3 dB beam width (ID ANT.U580/290): 30 x 65
- Polarization: Circular
- Antenna connection: TNC socket (50 ohm)
- Temperature range (ID ANT.U290/290): -25 degree C up to +55 degree C
- Temperature range (ID ANT.U580/290): Not specified
- Storage temperature range (ID ANT.U290/290): -25 degree C up to +80 degree C
- Tolerances: ±0.5 mm
The ID ANT40/30 and ID ANT100/100 are HF antennas designed for RFID proximity readers. They have an impedance of 50 ohm and operate at a frequency of 13.56 MHz. The antennas have a maximum transmitting power of 1 W and a data transfer rate of up to 424 kbits/s. The ID ANT100/100 has a reading distance of up to 14 cm. These antennas are suitable for applications such as eTicketing, eMobility, and Closed Loop Payment.
- Dimensions: ID ANT40/30 – 40 mm x 30 mm, ID ANT100/100 – 100 mm x 100 mm
- Interface: 2-pin connector or U.FL connector option
- Operating frequency: 13.56 MHz
- Impedance: 50 ohm
- Max. transmitting power: 1 W
- Max. reading distance: ID ANT40/30 – up to 7 cm, ID ANT100/100 – up to 14 cm
- Data transfer rate: ID ANT40/30 – up to 424 kbit/s, ID ANT100/100 – up to 212 kbit/s
- Power supply: Unneeded
- Temperature range: Operation -25 degree C up to +70 degree C, Storage -40degree C up to +85 degree C
- Relative air humidity: 0% up to 95% (non-condensing)
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)