FEIG – ID PRHD102
The ID PRHD102 Handheld Reader is a versatile dual frequency reader that supports both HF and UHF transponders. With its integrated antennas, easy handling, and multiple interface options, it is suitable for various applications such as delivery control and inventory purposes. The reader offers a maximum read range of 10 cm for HF transponders and a variable read range of 5 cm to 100 cm for UHF transponders, depending on the configured output power.
Specification
- Dimensions: 230 mm x 100 mm x 80 mm
- Weight:
- Bluetooth version: 270 g (including batteries)
- USB version: 170 g (without cable)
- Housing: Plastic ABS
- Protection class: IP30
- Operating frequency:
- HF: 13.56 MHz
- UHF: 860 MHz to 960 MHz
- Supply voltage:
- Bluetooth version: 4 Mignon Batteries2 V to5 V AA
- USB version: USB High Powered Interface
- Power consumption: max. 500 mA
- Output Power:
- HF: 200 mW
- UHF: 10 mW to 100 mW
- Interfaces:
- Bluetooth version: Bluetooth (serial port profile)
- USB version: USB (HID, 12 Mbit)
- Supported transponder types:
- HF: ISO 15693
- UHF: EPC Class1 Gen2, ISO 18000-6C
- Antenna:
- Integrated HF Antenna
- Integrated UHF Antenna
- Indicator:
- Optical: 1 LED (red / green / blue)
- Acoustic: 1 Buzzer
- Reader modes: FEIG ISO Host / FEIG Scan Mode
- Temperature range:
- Operation: 0 degree C up to +50 degree C
- Storage:-20 degree C up to +70 degree C
- Standard conformity:
- Radio license:
- HF: EN 300 330
- UHF: EN 302 208
- EMC: EN 301 489-3
- Safety & Health: EN 62368-1, EN 50364
Benefits
The ID PRHD102 Handheld Reader supports both HF and UHF transponders, allowing for versatile use in various applications.
The reader comes with integrated HF and UHF antennas, eliminating the need for external antennas and simplifying setup.
Choose between the wired USB version or the wireless Bluetooth version, depending on your connectivity needs. Both versions are available for the European Frequency Band and the FCC Frequency Band.
Related Products
The Shielded HF Pad Antenna, ID ANTS370/270-A and ID SPAD102, is a contactless data exchange antenna designed for desktop applications in offices and libraries. It allows for traceability of files and documents, as well as detection of lendable items at check out or return points. With a read range of over 30 cm, these antennas offer outstanding performance and modern design.
- Dimensions: 376 mm x 276 mm x 27 mm (14.8 inch x 10.0 inch x 1 inch)
- Weight: approx. 2.0 kg (4.4 lbs)
- Housing: Acrylic glass pad, plastic SB upper part, zinced steel lower part
- Color: Transparent or black pad, similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG58 coaxial cable with SMA connector (50 ohm); approx. 2.3m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation: -25 degree C up to +55 degree C (-13 F up to 131 F), Storage: -25 degree C up to +70 degree C (-13 F up to 158 F)
- Relative air humidity: 5% up to 95% (non-condensing)
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The ID ANT.U75/50 is a UHF antenna designed for short read ranges. It operates at frequencies of 865-868 MHz and 902-928 MHz, making it suitable for use with the UHF Reader module ID MU02-02 and the Mid Range Readers ID MR(M)U102. With its compact design and low installation depth, it is an ideal choice for applications requiring a compact UHF antenna.
- Dimensions: 75 mm x 50 mm x 3 mm
- Connection: U.FL connector
- Operating frequencies: 865-868 MHz (EU), 902-928 MHz (FCC)
- Impedance: 50 ohm
- Maximum input power: 300 mW
- Read range:
- Far Field Tags: up to 20 cm
- Near Field Tags: up to 4 cm
- Gain: -20 dBi (linear)
- SWR:
- EU: <5:1
- FCC: < 2.0:1
The ID ANT240/180 Pad Antenna is a highly efficient and compact solution for contactless data exchange with RFID transponders. Its flat and sleek design allows it to seamlessly fit into desktop environments, making it ideal for file tracking, library applications, and office use. The antenna provides an impressive read range of up to 42 cm, ensuring reliable performance in close-range RFID applications. Equipped with an optical feedback feature via a blue LED, the antenna offers real-time operational status updates. It connects easily to RFID readers using the included coaxial cable, providing a hassle-free installation process.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 in x 7.09 in x 0.51 in)
- Weight: 0.36 kg (0.8 lbs)
- Housing: Upper part Plastic ABS, lower part Plastic plate
- Color: Black (Pad), White (Upper part, RAL 9003)
- Protection Class: IP30
- Operating Frequency: 13.56 MHz
- Max. Transmitting Power:5 W
- Antenna Connection: RG174 coaxial cable with SMA connector (50 ohm), 2.2 m long
- Indicator: 1 Blue LED for operational status (switchable via DC voltage)
- Operating Temperature: -25degree C to +55degree C (-13F to 131F)
- Storage Temperature: -25degree C to +70degree C (-13F to 158F)
- Relative Humidity: 5% to 95% (non-condensing)
- Standard Compliance: EMC EN 301 489, Safety & Health EN 62368-1, EN 50364
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C