IDTronic – HF | NFC Embedded Reader R835
The iDTRONIC HF | NFC Embedded Reader R835 is a high-performance and low-cost reader series designed for integration into vending machines, healthcare, medicine, and identification products. With its cutting-edge microcontroller and latest HF transceiver technology, this reader allows users to read and write almost any 13.56 MHz transponders. It offers 5 different configurations that support common RFID standards such as ISO14443A/B (T=CL), ISO15693, ISO18092/ECMA-340 (NFC), and ISO 18000-3. The integrated antenna enables reading ranges of up to 8 cm, depending on the type of transponder.
The reader can be easily integrated into existing electronics or used for new development of high-end identification applications. It also comes with a useful SDK for easy development of controller, Linux, or Windows-based applications.
Specification
- Power Supply: 3.3 ~ 5 Vdc
- Power Consumption: < 150 mA, standby current < 1 mA (low power mode)
- Operating Frequency: 13.56 MHz
- Reading Distance: up to 8 cm
- Antenna: integrated, 55 x 30 mm
- Baudrate: 9600 – 115200 bit/s
- Interface: TTL, 3.3 V output levels, input is not 5 V or PC/SC
- Connector: Molex PicoBlade 53261 (PCB) 51021 (cable)
- Material: FR-4, Blue
- Mounting Option: Screwing
- Operating Temperature: -20 degree C – +80 degree C
- Storage Temperature: -40 degree C – +85 degree C
- Humidity: up to 95 %, non-condensing
- Supported OS: Windows 7, 8, 8.1, 10
- Supported Languages: C++, Binary command protocol
- Demo Software: Windows
- Applicable Standards: EMC, Radio Regulation, Safety, RED, RoHS 2, REACH
- Certificates: FCC, CE, IC
Benefits
NFC Embedded Reader R835 offers high-performance reading and writing capabilities for a wide range of transponders, making it suitable for various applications in vending machines, healthcare, and identification products.
With its TTL-based interface and integrated antenna, this reader can be easily integrated into existing electronics or used for new development projects. It also comes with a useful SDK and demo application for easy application development.
The reader supports multiple RFID standards, including ISO14443A/B, ISO15693, ISO18092/ECMA-340 (NFC), and ISO 18000-3, ensuring compatibility with a wide range of transponders and enabling versatile use in different industries.
Related Products
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The ID ANT240/180 Pad Antenna is a highly efficient and compact solution for contactless data exchange with RFID transponders. Its flat and sleek design allows it to seamlessly fit into desktop environments, making it ideal for file tracking, library applications, and office use. The antenna provides an impressive read range of up to 42 cm, ensuring reliable performance in close-range RFID applications. Equipped with an optical feedback feature via a blue LED, the antenna offers real-time operational status updates. It connects easily to RFID readers using the included coaxial cable, providing a hassle-free installation process.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 in x 7.09 in x 0.51 in)
- Weight: 0.36 kg (0.8 lbs)
- Housing: Upper part Plastic ABS, lower part Plastic plate
- Color: Black (Pad), White (Upper part, RAL 9003)
- Protection Class: IP30
- Operating Frequency: 13.56 MHz
- Max. Transmitting Power:5 W
- Antenna Connection: RG174 coaxial cable with SMA connector (50 ohm), 2.2 m long
- Indicator: 1 Blue LED for operational status (switchable via DC voltage)
- Operating Temperature: -25degree C to +55degree C (-13F to 131F)
- Storage Temperature: -25degree C to +70degree C (-13F to 158F)
- Relative Humidity: 5% to 95% (non-condensing)
- Standard Compliance: EMC EN 301 489, Safety & Health EN 62368-1, EN 50364
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C
The 4 Channel Antenna Multiplexer (ID CPR.ANT.MUX-M4) is a device that allows the connection of up to 4 external antennas to the reader module ID CPR74. With this multiplexer, it is possible to create up to 5 reading areas by utilizing the internal antenna of the ID CPR74. The control of each active antenna can be easily configured through the CPR74 or via two digital inputs with external control electronics. The multiplexer features non-wearing electronic switching of the outputs and has a high switching speed of less than 1 ms.
- Weight: 12 g
- MTBF (Mean Time Between Failures): 500,000 hours
- Power supply: +5 V DC ± 5%
- Current consumption: Less than 40 mA
- Digital inputs: Low level: 0 -0 V, High level: 3.8 V – VCC, Pull-Down: 10 kohm
- LED: 4 yellow LEDs for indicating active antennas
- Operating frequency: 13.56 MHz
- RF power: Maximum 500 mW
- Reader connection: U.FL connector
- Antenna connection: 4 x U.FL connectors for external antennas
- Temperature range: Operation: -25 degree C up to +70 degree C, Storage: -40degree C up to +85 degree C
- Relative air humidity: Maximum 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364, Environment: WEEE-2002/96/EC, RoHS-2011/65/EC
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)