HID – Janam XM75+ Rugged Touch Computer | Android 11 Mobile Computer With Built-In RFID, NFC, and Numeric Keypad
The HID Janam XM75+ is an Android 11 rugged touch computer built for input-intensive mobile workflows in transportation, logistics, field service, and delivery environments. Combining a 4.3-inch capacitive touch screen with a backlit 24-key numeric keypad, it is one of the only devices designed for workers who need both input methods in a single pocketable form factor. A 1.8 GHz Qualcomm Snapdragon octa-core processor, 4200mAh battery, IP67 sealing, MIL-STD 810G drop protection, built-in RFID/NFC (WWAN version), Honeywell 2D imager, and backward compatibility with XM75 accessories make the XM75+ a direct upgrade path for existing Janam deployments.
Specification
Physical Characteristics
- Dimensions: 3.02 in. x 6.53 in. x 1.15 in. / 76.83 mm x 166.01 mm x 29.27 mm
- Weight: 10.5 oz. / 300 g including battery
- Display: 4.3 in. WVGA (480 x 800 pixels) with Corning Gorilla Glass 3
- Touch Panel: Capacitive touch screen
- External Buttons: 24-key backlit numeric keypad; 2 external buttons
- Audio: 3.5 mm headset jack; speaker; two microphones
- Alerts: Vibration; dual-color LED indicators
- Motion Sensors: Gyroscope; accelerometer; light sensor; proximity sensor; digital compass
Technical
- Operating System: Android 11 with Google Mobile Services (GMS)
- Processor: 1.8 GHz Qualcomm Snapdragon octa-core
- Memory: 3 GB RAM / 32 GB storage
- Expansion: User-accessible microSD card slot; supports up to 512 GB using ExFAT file system
- Power: 4200 mAh 3.85V rechargeable Li-ion battery
Data Capture
- Imager: Honeywell N3601SR 2D Imager
- Camera: 8MP color rear-facing autofocus with user-controllable LED flash
- RFID / NFC (WWAN version only): Reads ISO14443A, ISO14443B, ISO15693; MIFARE UltraLight; MIFARE 1k/4k/DESFire; MIFARE DESFire EV1; Sony FeliCA; NFC Tag Types 1 to 5
Connectivity
- USB: MicroUSB port, USB 2.0 High-Speed
- WWAN: EDGE/GPRS/GSM 900/1800; WCDMA B1/2/5/6/8/19; LTE FDD B1/2/3/5/7/8/17/20; LTE TDD B40/41
- WLAN: 802.11a/b/g/n/ac/ax (ready)/d/h/i/k/r/v; 1×1 MU-MIMO
- WPAN: Bluetooth Class I v5.1 with BLE support
- GPS: Qualcomm GPS with GLONASS and Beidou support
- Security: WEP (40 or 104 bit); WPA/WPA2 Personal (TKIP, AES); WPA/WPA2 Enterprise (TKIP/AES); WPA3 Personal (SAE); WPA3 Enterprise (AES); WPA3 Enterprise 192-bit mode (GCMP 256); Enhanced Open (OWE); PEAP (MSCHAPv2, GTC); TLS; TTLS (PAP, MSCHAP, MSCHAPv2, GTC); PWD; SIM; AKA; AKA’; LEAP
Environmental Ratings
- Operating Temperature: -4°F to 140°F / -20°C to 60°C
- Storage Temperature: -13°F to 158°F / -25°C to 70°C
- Humidity: 95% non-condensing
- Drop: Multiple 5 ft. / 1.5 m drops to concrete on all sides across a wide temperature range per MIL-STD 810G
- Water and Dust: IP67
- ESD: +/- 15 kV air; +/- 8 kV contact
Accessories
- Single-Slot USB Cradle Kit
- Single-Slot Ethernet Cradle Kit
- Four-Slot Cradle Kit
- Four-Slot Battery Charging Kit
- Power Adapter
- Spare Battery
- Nylon Holster
- Operating Case
- Stylus with Tether
- Handstrap
- Trigger Handle
Regulatory Compliance
- Safety: IEC/EN-60950-1, cUL 60950-1, UN38.3, UL2054/UL1642, IEC62133, KC, PSE
- Radio: FCC, CE (EMC, RF, SAR, RED), IC
- Environmental: RoHS, WEEE Compliant, NRCAN
Benefits
The XM75+ is purpose-built for workers who enter data by hand in the field. The backlit 24-key numeric keypad and 4.3-inch capacitive touch screen operate independently, so workers choose the input method that fits the task without switching devices or using attachments.
The WWAN version combines a Honeywell 2D imager, built-in RFID/NFC reader supporting ISO14443, ISO15693, and NFC Types 1–5, plus 4G LTE cellular in one IP67-sealed device — eliminating the need to carry separate scanners or sleds for multi-modal data capture workflows.
The XM75+ accepts all existing XM75 accessories — cradles, holsters, trigger handles, and charging kits — so operations upgrading from the XM75 platform reuse deployed infrastructure rather than replacing it, reducing the total cost of the upgrade.
Related Products
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The ID ANT.U75/50 is a UHF antenna designed for short read ranges. It operates at frequencies of 865-868 MHz and 902-928 MHz, making it suitable for use with the UHF Reader module ID MU02-02 and the Mid Range Readers ID MR(M)U102. With its compact design and low installation depth, it is an ideal choice for applications requiring a compact UHF antenna.
- Dimensions: 75 mm x 50 mm x 3 mm
- Connection: U.FL connector
- Operating frequencies: 865-868 MHz (EU), 902-928 MHz (FCC)
- Impedance: 50 ohm
- Maximum input power: 300 mW
- Read range:
- Far Field Tags: up to 20 cm
- Near Field Tags: up to 4 cm
- Gain: -20 dBi (linear)
- SWR:
- EU: <5:1
- FCC: < 2.0:1
The ID ANT240/180-A is a flat and compact pad antenna designed for contactless data exchange with RF RFID transponders. With a read range of up to 42 cm, it is suitable for use in enclosed spaces such as offices, libraries, and file tracking applications. The antenna features a sleek design and can be connected directly to a reader with an included coaxial cable.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.36 kg (0.8 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic plate
- Colour: Black pad and similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG174 coaxial cable with SMA connector (50 ohm); approx. 2.2m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364
The ID ANT.U290/290 and ID ANT.U580/290 are robust UHF RFID antennas designed for optimized reading performance. With circular polarization, these antennas allow for the identification of transponders in different orientations, enabling 3-dimensional identification in gate applications. They are suitable for both indoor and outdoor use, with a high protection class IP67 rating. These antennas have a modern and elegant design, and they are available in different dimensions and colors. They have TNC connectors and VESA connection for easy installation. The ID ANT.U580/290 has a 30° beam width, making it particularly suitable for vehicle identification and Free Flow Tolling systems.
- Dimensions (ID ANT.U290/290): 288 mm x 288 mm x 65 mm
- Dimensions (ID ANT.U580/290): 576 mm x 288 mm x 80 mm
- Housing: PC / Aluminium
- Color: Anthracite, translucent
- Weight (ID ANT.U290/290): 1,550 g
- Weight (ID ANT.U580/290): 3,850 g
- Protection class: IP67
- Gain (ID ANT.U290/290): Approx. 9 dBic
- Gain (ID ANT.U580/290): Approx. 11 dBic
- 3 dB beam width (ID ANT.U290/290): 65 x 65
- 3 dB beam width (ID ANT.U580/290): 30 x 65
- Polarization: Circular
- Antenna connection: TNC socket (50 ohm)
- Temperature range (ID ANT.U290/290): -25 degree C up to +55 degree C
- Temperature range (ID ANT.U580/290): Not specified
- Storage temperature range (ID ANT.U290/290): -25 degree C up to +80 degree C
- Tolerances: ±0.5 mm
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g