IDTronic – IGNITE-SMART Reader
The IGNITE-SMART Reader is a battery-powered smart RFID reader designed for E-Mobility vehicles such as electric scooters, cars, and e-bikes. It serves as a lock for these vehicles, providing a secure and convenient way to start and stop the engine without the need for an ignition key. With its integrated HF and NFC reader, it supports DESFire and NFC tags and transponders, allowing for easy programming of RFID keys. The reader automatically detects a valid RFID key, wakes up the ECU, and sends the key number to the ECU. It communicates with a CANbus interface, making it compatible with a wide range of vehicles. The IGNITE-SMART Reader is built to withstand demanding outdoor usage with its IP64 protection class and can operate in temperature fluctuations from -10 degree C to +50 degree C. It is certified according to RoHS 2 and REACH, and comes with a software development kit for easy integration into existing systems.
Specification
- Power Supply: 7.6 – 13.8 Vdc (battery powered)
- Power Consumption: < 120 mA, standby current < 1 mA (low power mode)
- Operating Frequency: HF | NFC: 13.56 MHz
- Antenna: Integrated
- Reader IC: CL 663
- RF TX Speed: up to 848 kBd
- Interfaces: CANbus (SAE J1939 or CANopen) with custom-specific communication protocol
- Baudrate CANbus: 250 or 500 kbit/s
- Connectors: JST 04T-JWPF-VSLE-S, 0.33 mm²/ AWG22 wire gauge
- Dimensions: 81.4 x 68.6 x 24.1 mm
- Material: ABS (Acrylonitrile Butadiene Styrene)
- Weight: 90 g (incl. cable)
- Operating Temperature: -10 degree C to +50 degree C
- Storage Temperature: -20 degree C to +60 degree C
- Humidity: up to 95 %, non condensing
- MTBF: 200,000 h
- Protection Class: IP64 (potted electronics)
- Supported Standards | Tags: ISO 14443A/B, ISO 15693, NFC-IP1, NFC-IP2
- Applicable Standards: EMC, Radio Regulation, Safety, RoHS 2, REACH
- Certificates: FCC, CE
- Supported OS: Windows 7, 8, 8.1, 10
- Supported Languages: C++, Binary command protocol
- Demo Software: Windows
Benefits
The IGNITE-SMART Reader serves as a smart lock for E-Mobility vehicles, allowing users to start and stop the engine without the need for an ignition key, providing convenience and enhanced security.
With its integrated HF and NFC reader, the IGNITE-SMART Reader supports DESFire and NFC tags and transponders, making it compatible with a wide range of RFID keys and enabling easy programming during production.
Designed for demanding outdoor usage, the IGNITE-SMART Reader has an IP64 protection class and can withstand temperature fluctuations from -10 °C to +50 °C, ensuring its durability and reliability in various environments.
Related Products
The ID PAD74-U is a compact and powerful USB pad reader designed for contactless data exchange with HF transponders. It features a defined capture window and a read range of up to 19 cm. With support for ISO 15693 and ISO 14443 transponders, it is suitable for applications like access control, user ID card detection, and book/document tracing in libraries and offices. The reader comes with 3 LEDs for optical feedback and is USB powered, making it easy to connect to a laptop or desktop PC.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.5 kg (1.2 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic blade
- Color: Pad in black, upper part in similar RAL 9003 (white)
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power: 400 mW ±1 dB
- Supply voltage: 5V DC (via USB)
- Power consumption: max. 2.5 W
- Interfaces: USB 2.0
- Indicator, optical: 3 LEDs (green, red, blue)
- Supported transponders: ISO 15693, ISO 14443-A/B, (ISO 18000-3 MODE 1)*
- Reader modes: ISO Host Mode, Scan Mode**
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Software development kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver: Windows Server 2012 and 2016, Windows 10 and 11; 32/64 Bit
The UHF Mid-Range Antenna ID ANT.U150/150 by FEIG ELECTRONIC GmbH is a robust, compact, and aesthetically pleasing antenna designed for a variety of demanding environments. With a circular polarization that ensures optimal performance and reliable read ranges up to 4 meters, this antenna is ideal for logistics, industrial applications, railway systems, waste management, and retail inventory tracking. Its IP68 protection class makes it suitable for permanent outdoor use, even in harsh industrial settings. The ID ANT.U150/150 features a VESA100 standard mounting for easy installation and is compatible with multiple FEIG UHF readers, making it a versatile solution for efficient asset tracking and inventory management.
- Dimensions: 151 mm x 150 mm x 14.5 mm
- Weight: 230 g
- Housing: ABS, UV resistant, and fire-retardant
- Protection Class: IP68
- Gain: Approximately 5 dBic
- 3 dB Beam Width: 105 x 105
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
EU Variant: 865 Mz – 868 MHz
FCC Variant: 902 MHz – 928 MHz
The ID ANT340 / 240 HF Pad Antenna is an elegantly designed, high-performance antenna for contactless data exchange with HF transponders. Ideal for office and library applications, it provides up to a 30 cm read range for seamless file and document tracking. The antenna is built with a sleek, flat profile, making it a versatile choice for desktop use. It comes equipped with a 230 cm coaxial cable and SMA plug, ensuring easy integration with compatible readers. Available in both plastic housing and module form, this antenna offers flexibility for various applications in secure, contactless communication systems.
- Dimensions: 337 mm x 237 mm x 8 mm
- Weight: 530 g
- Material: Plastic ABS housing
- Color: Grey-white
- Protection Class: IP40
- Operating Frequency: 13.56 MHz
- Maximum Transmitting Power:2 W
- Antenna Connection: 1 x SMA plug (50 ohm)
- Cable Length: 230 cm RG58 coaxial cable
- Operating Temperature: 0degree C to +55degree C
- Storage Temperature: -25degree C to +85degree C
- Humidity Range: 5% to 95% (non-condensing)
- Compliance: EMC EN 301 489, Safety EN 62368-1, EN 50364
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)