SIVA – Contshare NFC 2525 NFC Label
The SIVA Contshare NFC 2525 is a square 25 x 25 mm printable NFC label built on the NXP NTAG213 IC, designed for authentication, content sharing, and product engagement applications where a compact, smartphone-readable label is required. Operating at 13.56 MHz and compliant with NFC Forum Type 2 and ISO/IEC 14443A, it carries 144 bytes of user memory and a 56-bit UID, making it suited for URL redirection, product authentication, loyalty programs, smart packaging, and interactive marketing on non-metallic surfaces including cardboard, plastic, glass, and paper.
At just 0.2 mm thick on a printable white PET face with high-performance permanent adhesive, the NFC 2525 applies cleanly to retail packaging, hang tags, product labels, event credentials, and consumer goods without altering the product’s appearance. Full bond strength is achieved within 24 hours of application, and the label supports a minimum bending diameter of 50 mm for curved surface use. Each reel contains 2,000 100%-tested labels with defective labels marked for easy identification, packaged 2,000 pcs per box and 4 boxes per carton.
The NFC 2525 is compatible with NFC-enabled thermal transfer printers for on-demand printing and encoding in a single pass. Customer-specific EPC user memory encoding, black custom artwork including logos, text, numbers, and barcodes, and colour artwork with transparent over-lamination (MOQ 10,000 units) are all available on request. It is supplied under part number RF.LI.NFC.2525.213, and alternative IC options are available on request.
Specification
Physical Characteristics
- Label Size: 25 mm x 25 mm x 0.2 mm / 0.98 in. x 0.98 in. x 0.007 in.
- Face Material: Printable white PET (resin ribbon recommended)
- Adhesive: High performance permanent adhesive; full bond strength achieved in 24 hours
- Minimum Bending Diameter: 50 mm
- Label Pitch: 30.48 mm / 1.2 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 2,000 pcs per reel; 100% performance checked; defective labels marked
- Packaging: 2,000 pcs per box; 4 boxes per carton
- Part Number: RF.LI.NFC.2525.213
RF Characteristics
- Air Interface Protocol: NFC Forum Type 2; ISO/IEC 14443A
- Operational Frequency: 13.56 MHz
- IC: NXP NTAG213 (other ICs available on request)
- Memory Configuration: USER 144 bytes; UID 56 bit
- Applicable Surface Materials: Non-metallic surfaces
Environmental Ratings
- Operating Temperature: -25°C to +70°C / -13°F to +158°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Storage Condition: 1 year at +20°C / 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific encoding of user memory
- Customized Printing (black): Customer-specific artwork including logo, text, numbers, and barcodes
- Colour Artwork: Colour imprint with transparent over-lamination available (MOQ 10,000 units)
Benefits
NFC Forum Type 2 compliance means any NFC-enabled smartphone taps and reads the NFC 2525 natively, triggering URLs, authentication checks, or content without requiring a dedicated app download from the end user.
At 25 x 25 mm, the NFC 2525 fits neatly on small retail labels, hang tags, cosmetic packaging, and product stickers where rectangular labels overhang or misalign, giving brand owners a clean, unobtrusive NFC touchpoint.
Compatibility with NFC-enabled thermal transfer printers lets operations print custom artwork and encode user memory simultaneously, eliminating a separate encoding step and reducing label production time on high-volume lines.
Related Products
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Ferrowave Micro is an RFID on-metal label specifically designed for short-term tracking of specialty retail items. With its small footprint and optimized performance on metal surfaces, this label is ideal for applications where tracking and identification of items is crucial. The label offers a read range of up to 4 meters on metal, making it highly efficient in inventory management and supply chain operations. Its compact size and durable construction ensure reliable performance in various environmental conditions.
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Carrier KLT is a UHF RFID label designed for returnable plastic containers, compliant with VDA recommendation 4500. This label utilizes Impinj Monza 4ETM IC technology and operates at a global frequency range of 860-960MHz. With a read range of up to 12.5m on plastic and 11m on cardboard, it is suitable for various non-metallic surfaces and can be used on boxes containing fruits, vegetables, groceries, liquid bottles, and utilities.
The label is resistant to water, chemicals, and extreme temperatures, making it ideal for a wide range of environments. With options for pre-encoding, customized printing, and over-lamination, the Beontag Carrier KLT offers flexibility and durability for asset identification and tracking.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.