SIVA – Pat-Track M730 UHF RFID Smart Wristband
The SIVA Pat-Track M730 is a smart UHF RFID wristband specifically designed for patient identification, real-time location systems (RTLS), and hospital workflow automation. Built to securely connect patients with hospital information systems, this RFID wristband enables fast, contactless identification without line-of-sight, even when covered by clothing or bedding.
Powered by the Impinj Monza M730 UHF RFID chip, the Pat-Track M730 delivers long read range performance across global UHF frequencies, making it ideal for patient tracking, access control, asset association, сход compliance, and safety monitoring in healthcare environments. Its protruding antenna design significantly enhances read performance while maintaining wearer comfort.
The wristband features a direct thermal printable white PP face stock, allowing on-demand printing of patient names, barcodes, IDs, and hospital branding using standard thermal printers. A high-performance permanent adhesive closure ensures secure fastening and tamper resistance throughout the patient stay.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Gen2v2 / ISO/IEC 18000-63
-
Operational Frequency: Global 860–960 MHz
-
IC Type: Impinj Monza M730
-
Memory Configuration:
-
EPC: 128 bits
-
User Memory: 0 bits
-
-
Data Retention: Minimum 10 years
-
Write Cycle Endurance: 10,000 cycles
-
Read Range (2W ERP):
-
ETSI: up to 7 m (22.96 ft)
-
FCC: up to 12 m (39.37 ft)
-
-
Applicable Surface: Human wrist
Physical Specification
-
Face Stock: Direct thermal white PP
-
Wristband Size: 419.1 × 30 mm (16.5″ × 1.18″)
-
Thickness:
-
Overall: 165 microns
-
Over inlay: 240 microns
-
-
Adhesive: High-performance permanent adhesive
-
Weight: 1.95 g
-
Delivery Format: Roll form
-
Bands per Roll: 125
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter: 120 mm (4.7″)
Environmental Resistance
-
Operating Temperature: –20°C to +80°C (–4°F to +176°F)
-
Adhesive Service Temperature: –20°C to +80°C (–4°F to +176°F)
-
Recommended Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Humidity Resistance:
-
95% RH at 60°C (100 h)
-
50% RH at 80°C (100 h)
-
-
Water Resistance: IP67
-
Storage Conditions: +23°C / 50% RH
Benefits
Protruding antenna design allows reliable UHF RFID reading even under clothing or bedding.
Enables real-time location tracking, access control, and secure patient-to-system association.
Direct thermal printing, lightweight construction, and strong adhesive ensure comfort and durability throughout patient stays.
Related Products
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Ferrowave Micro is an RFID on-metal label specifically designed for short-term tracking of specialty retail items. With its small footprint and optimized performance on metal surfaces, this label is ideal for applications where tracking and identification of items is crucial. The label offers a read range of up to 4 meters on metal, making it highly efficient in inventory management and supply chain operations. Its compact size and durable construction ensure reliable performance in various environmental conditions.
The Beontag Crosswave Classic is a dual-dipole label designed for logistics applications, offering excellent reading performance and a consistent radiation pattern. This UHF RFID label operates at a global frequency range of 860-960MHz and utilizes the Impinj Monza 4E IC for efficient and reliable performance. With a memory configuration of EPC 496 bit, TID 96 bit, and User 128 bit, this label provides ample storage capacity for tracking and identification purposes. The Beontag Crosswave Classic offers a read range of up to 10 meters on plastic and cardboard surfaces, making it suitable for a variety of non-metallic materials.
With its 360° readability, this label ensures constant reading performance in all orientations, even when using a linear reader antenna. The tag materials consist of a matt coated paper face material with a general purpose permanent adhesive for secure attachment. Available in different dimensions and delivery formats, the Beontag Crosswave Classic is a reliable and versatile solution for logistics and tracking applications.
The Beontag Carrier KLT is a UHF RFID label designed for returnable plastic containers, compliant with VDA recommendation 4500. This label utilizes Impinj Monza 4ETM IC technology and operates at a global frequency range of 860-960MHz. With a read range of up to 12.5m on plastic and 11m on cardboard, it is suitable for various non-metallic surfaces and can be used on boxes containing fruits, vegetables, groceries, liquid bottles, and utilities.
The label is resistant to water, chemicals, and extreme temperatures, making it ideal for a wide range of environments. With options for pre-encoding, customized printing, and over-lamination, the Beontag Carrier KLT offers flexibility and durability for asset identification and tracking.
The Beontag Carrier HF is a high-frequency RFID label designed for non-metallic surfaces. It is available in two variants: NTAG213 and SLIX2, which comply with NFC Forum Type 2 and Type 5 standards respectively. With an operational frequency of 13.56 MHz, this label offers reliable and secure communication. The Beontag Carrier HF is suitable for a wide range of applications, including asset tracking, inventory management, and supply chain optimization. Its key benefits include excellent read range, durable construction, and compatibility with various printing and encoding options.