SIVA – Sprintt-Slim RAIN RFID Race Timing Tag
The SIVA Sprintt-Slim is a 1.6 mm thin UHF RAIN RFID foam tag from the Sprintt Race Timing Solutions series, purpose-built for affixing directly onto race number bibs for marathon, triathlon, running event, and mass participation race timing applications. Built on the Impinj M830 Dogbone IC and operating at ETSI 865–928 MHz with 128-bit EPC and 96-bit TID memory, it delivers 18 m / 59.05 ft read range in free air and 4 m / 13.12 ft read range on the human body, enabling reliable chip detection at finish lines, timing mats, and intermediate split points even when bibs move during running.
At 98 x 30 x 1.6 mm on a white PE foam face with high-performance permanent adhesive, the Sprintt-Slim is thin and flexible enough to sit flat on a paper bib without creating bulk or discomfort for the athlete. Its transparent release liner is designed specifically for easy gap sensing on thermal transfer printers, making it compatible with major industrial RFID printers for on-demand bib encoding and printing in a single pass. Installation is straightforward: the tag is placed on the back of the race bib at the pre-identified location, pressed firmly from center outward for full adhesive contact, with safety pins placed at the bib corners only, not over the tag.
Each reel ships 1,000 100%-tested labels with a label pitch of 33 mm, packaged 2,000 pcs per box. IP67 rated and operating from -35°C to +85°C, the Sprintt-Slim performs reliably in outdoor race conditions including rain and wet weather. Customer-specific EPC encoding and custom printed artwork including logos, text, numbers, and barcodes in black are available on request under part number RF.1.6FT.De.9830.M83.
Specification
Physical Characteristics
- Label Size: 98 mm x 30 mm x 1.6 mm / 3.85 in. x 1.18 in. x 0.062 in.
- Face Material: White PE Foam (wax ribbon recommended)
- Adhesive: High performance permanent adhesive
- Release Liner: Transparent (for easy gap sensing on printers)
- Label Pitch: 33 mm / 1.29 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 1,000 pcs per reel; 100% performance checked
- Packaging: 2,000 pcs per box
- Part Number: RF.1.6FT.De.9830.M83
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (ETSI): 865–928 MHz
- IC: Impinj M830 (Dogbone)
- Memory Configuration: EPC 128 bit; TID 96 bit
- Applicable Surface Materials: For application onto race timing bibs
Performance
- Read Range in Free Air (2W ERP): 18 m / 59.05 ft
- Read Range on Human Body (2W ERP): 4 m / 13.12 ft
Printer Compatibility
- Compatible Printer Types: Major industrial RFID thermal transfer printers
- Sensor Type: Gap (transparent release liner for easy gap sensing)
Installation Notes
- Place race bib face down on a clean, flat surface
- Peel tag from liner and place firmly at the pre-identified bib location; avoid touching the adhesive or bending the tag
- Apply gentle, even pressure from center outward for full adhesive contact
- Place safety pins at bib corners only; do not place safety pins over the tag
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- IP Classification: IP67
- Storage Condition: 1 year at +20°C / 73.4°F at 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes in black
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
At 4 m on the human body, the Sprintt-Slim reads consistently as athletes cross timing mats at full running speed, reducing missed reads caused by bib movement, body angle, or crowd density at high-volume race finish areas.
The PE foam construction keeps the tag flexible and flat against the paper bib surface, so athletes feel no rigid lump or raised edge during the race, and the tag does not peel or lift at the corners under sweat and weather conditions.
The transparent release liner is engineered specifically for gap sensing on industrial RFID printers, letting race organisers print athlete numbers, barcodes, and event artwork directly onto the tag face and encode the EPC in a single printer pass without manual intervention.
Related Products
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Ferrowave Classic is an RFID on-metal label designed specifically for packaging and component tracking. It is a UHF RFID/EPCglobal Gen2v2 device that operates at frequencies of 865-869MHz (ETSI) and 902-928MHz (FCC). The label utilizes Impinj Monza R6-P, Impinj Monza 4E, or NXP UCODE 8m IC types, each with different memory configurations. The label’s electrical specification includes unique random EPC in every label for Monza R6-P and NXP UCODE 8m, and the same EPC in every label for Monza 4E. The read range varies depending on the surface material, with ranges of up to 12m for glass, 5m for plastic, 4m for metal, and 2m for liquid.
The label is printable on white PET with a high-performance acrylic adhesive for easy installation. It weighs only 0.8g and comes in a reel format with 800 good labels. The Beontag Ferrowave Classic is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperatures of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It is compatible with various printers, including Zebra, Sato, and Printronix models.
The Beontag Carrier Dual is a versatile dual-frequency label designed for logistics and consumer interaction. This label combines RAIN RFID and NFC memory, making it suitable for a wide range of applications. With its RAIN RFID / EPCglobal Gen2v2 and NFC Forum Type 5 compatibility, it can be used with various air interface protocols. The label operates at different frequencies, with RAIN RFID at 865-928 MHz and NFC at 13.56 MHz. It features the EM Microelectronic EM4425 IC, which offers different memory configurations depending on the version. The label has a read range of up to 11m on cardboard and up to 10m on plastic for RAIN RFID, while for HF/NFC, it can be read by a mobile phone up to 3cm away or by a fixed reader up to 60cm away. The Beontag Carrier Dual is designed for non-metallic surfaces and is made of printable white PET with a high-performance acrylic adhesive.
It weighs less than 1g and comes in a delivery format of 1000 pcs/reel. With its excellent environmental resistance, including water resistance (tested for 5 hours in 1m deep water) and chemical resistance (no physical or performance changes after exposure to motor oil, salt water, sulfuric acid, NaOH, and acetone), this label is built to withstand harsh conditions. It has an operating temperature range of -35degree C to +85degree C and an expected lifetime of years in normal operating conditions. The Beontag Carrier Dual can be personalized with customer-specific encoding and visual marking, making it highly customizable. It is also printer compliant with the Zebra ZT411 printer.
- Device type: RAIN RFID / EPCglobal Gen2v2, NFC Forum Type 5
- Air interface protocol: ISO/IEC 18000-63, ISO/IEC 15693
- Operational frequency: RAIN RFID (865-928 MHz), NFC (13.56 MHz)
- IC type: EM Microelectronic EM4425
- Memory configuration: EM4425 V10 (HF: 64 bit UID, UHF: 288 bit EPC, 256 bit User, 96 bit TID, Shared user memory for HF and UHF: 1472 bits), EM4425 V12 (HF: 64 bit UID, UHF: 96 bit TID, 2048 bit configurable memory can be divided to 96 – 480 bit UHF EPC and shared user memory for HF and UHF, Web authentication uses AES-128 to create a onetime password (OTP) crypto signature)
- Read range: RAIN RFID (On cardboard up to 11m / 36 ft, On plastic up to 10m / 33 ft), HF/NFC (Mobile phone up to 3cm, Fixed reader up to 60cm)
- Applicable surface materials: Non-metallic surfaces
- Tag materials: Printable white PET, resin ribbon recommended
- Background adhesive: High performance acrylic adhesive optimized for low surface energy plastics
- Weight: <1g
- Delivery format: 1000 pcs / reel
- Pitch on reel: 38.1 mm / 5 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 36 x 70 x 0.2 mm / 41 x 2.75 x 0.01 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +90degree C / -31F to +194F
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.