SIVA – UNI™ 6326 TP DUO-FRE Dual-Frequency UHF + NFC Tamper-Proof RFID Label
The SIVA UNI™ 6326 TP DUO-FRE is a dual-frequency UHF + NFC RFID label designed for secure identification, brand protection, and customer engagement. Combining UHF RFID for long-range supply chain tracking with NFC for smartphone interaction, this label enables seamless data sharing across enterprise systems and consumer-facing applications.
Built with a tamper-proof security design, the label cannot be removed intact—any attempt to transfer it results in visible breakage. This makes it ideal for anti-counterfeiting, warranty validation, asset authentication, sealed packaging, and secure labeling.
A key differentiator is its shared memory architecture, allowing both the UHF and NFC interfaces to access the same user memory. This enables unified data handling between logistics systems, ERP platforms, and mobile NFC experiences, reducing complexity and improving traceability across the product lifecycle.
Specification
RF Specification
-
Air Interface Protocol: ISO/IEC 18000-63:2015, EPCglobal Gen2v2
-
Operating Frequencies:
-
UHF: Global 865–928 MHz
-
NFC/HF: 13.56 MHz
-
-
IC Type: EM4425
-
Memory Configuration:
-
UHF: Up to 480-bit EPC, 96-bit TID
-
HF: 64-bit UID
-
Shared configurable USER memory: 2048 bits (UHF & NFC)
-
-
Read Range (2W ERP):
-
On plastic: up to 6 m (19.68 ft)
-
On cardboard: up to 4 m (13.12 ft)
-
-
Applicable Surfaces: Non-metallic materials
Physical Specification
-
Face Stock: Printable white PET (resin ribbon recommended)
-
Label Size: 63 × 26 × 0.2 mm (2.48″ × 1.20″ × 0.01″)
-
Adhesive: High-performance permanent adhesive for diverse substrates
-
Delivery Format: 2000 labels per reel
-
Label Pitch: 31.75 mm (1.25″)
-
Core Inner Diameter: 76 mm (3″)
-
Weight: 0.5 g
-
Release Liner: White PET
Environmental Resistance
-
Operating Temperature: –25°C to +85°C (–4°F to +158°F)
-
Adhesive Service Temperature: –20°C to +85°C (–4°F to +185°F)
-
Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Ingress Protection: IP68 (waterproof and dustproof)
-
Chemical Resistance: No physical or performance degradation after exposure to:
-
Salt water (10% salinity)
-
Motor oil
-
Sodium hydroxide (10%)
-
Acetone
-
-
Storage Conditions: +23°C / 50% RH
Benefits
Enables long-range supply chain tracking and short-range smartphone interaction using a single secure RFID label.
Break-on-removal design provides visible evidence of tampering, ideal for authentication and anti-counterfeiting use cases.
Unified memory accessible via both UHF and NFC simplifies data management across enterprise systems and mobile applications.
Related Products
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag Heatwave Ultra is an RFID tag specifically designed for extreme temperature environments. With its exceptional temperature resistance and robust enclosure, this UHF RFID tag is ideal for applications where durability and reliability are crucial. The tag operates at both ETSI and FCC frequencies, allowing for global compatibility. It features the NXP UCODE 7xm+ IC, which provides excellent performance and reliability. The tag has a read range of up to 10 meters and is optimized for use on metallic surfaces. With its high-performance thermoplastic materials, the tag can withstand temperatures ranging from -35degree C to +85degree C.
It has been tested for peak temperatures of up to 235degree C and is resistant to various chemicals, including saltwater, motor oil, NaOh, sulfuric acid, and acetone. The Beontag Heatwave Ultra is IP68 rated, ensuring protection against dust and water ingress. With its long expected lifetime and multiple personalization options, this RFID tag is a reliable and versatile solution for a wide range of applications.
The Beontag Ferrowave Micro is an RFID on-metal label specifically designed for short-term tracking of specialty retail items. With its small footprint and optimized performance on metal surfaces, this label is ideal for applications where tracking and identification of items is crucial. The label offers a read range of up to 4 meters on metal, making it highly efficient in inventory management and supply chain operations. Its compact size and durable construction ensure reliable performance in various environmental conditions.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Cruiser Headlamp is a non-transferable tamper-proof label designed specifically for vehicle headlamps and windshields. This UHF RFID / EPCglobal Gen2v2 device offers a read range of up to 9 meters (ETSI) or 10.5 meters (FCC), making it ideal for tracking and identification purposes. With its Impinj Monza 4E IC, the label provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag materials include an aluminum antenna with acrylic adhesive on the back side and inkjet and thermal printable transparent PET on the front side. With a weight of less than 1 gram, the Beontag Cruiser Headlamp is lightweight and easy to install.
It comes in a delivery format of 1000 pcs on a reel, with a pitch on reel of 22.86 mm and a reel core inner diameter of 76 mm. The tag dimensions are 90 x 11.5 x 0.2 mm. This tamper-proof label is resistant to various environmental conditions, including operating temperatures ranging from -35degree C to +85degree C, and exposure to salt water, motor oil, windshield washing fluid, and more. With options for pre-encoding, customized full-color artwork, and customer-specific visual printing, the Beontag Cruiser Headlamp offers flexibility and personalization.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit; User 128 bit; TID 96 bit
- Read range: ETSI – up to 9 m / 27 ft, FCC – up to 10.5 m / 34 ft
- Applicable surface materials: Glass
- Tag materials: Aluminum antenna with acrylic adhesive (back side), Inkjet and thermal printable transparent PET (front side)
- Weight: <1 g
- Delivery format: 1000 pcs on reel
- Pitch on reel: 22.86 mm / 0.9 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 90 x 15 x 0.2 mm / 3.54 x 0.45 x 0.008 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Chemical resistance: No physical or performance changes in various exposures