SIVA – VOYAGER™ 3rd License Plate TP DNA – Tamper-Proof UHF RFID Windshield Label
The SIVA VOYAGER™ 3rd License Plate TP DNA is a tamper-proof UHF RFID windshield label engineered for high-security vehicle identification and registration systems. Designed as a non-transferable “third license plate,” this RFID label enables fast, contactless vehicle recognition without line-of-sight, even at high speeds and in dense traffic environments.
Using the NXP UCODE DNA RFID chip, this label provides advanced cryptographic security, making it ideal for applications that require anti-cloning, authentication, and fraud prevention. The RFID antenna is printed with conductive ink and precisely tuned for glass surfaces, ensuring reliable long-range performance when mounted on the inside of the vehicle windshield, with printed vehicle data visible from the outside.
With resistance to UV, IR, moisture, chemicals, and temperature fluctuations, the SIVA VOYAGER™ 3rd License Plate TP DNA is purpose-built for government vehicle registration programs, electronic toll collection (ETC), smart parking systems, access control, fleet management, and intelligent transportation systems (ITS).
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 860–960 MHz
-
IC Type: NXP UCODE DNA
-
Memory Configuration:
-
EPC: 224 bits
-
USER Memory: 3072 bits
-
TID: 96 bits with 48-bit unique serial number
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 20 years
-
Read Range (2W ERP):
-
ETSI (on glass): up to 10 m (32.8 ft)
-
FCC (on glass): up to 11 m (36.1 ft)
-
-
Applicable Surface: Automotive glass (windshields)
Physical Specification
-
Face Stock: Special transparent plastic film
-
Overall Label Size: 72 × 96 × 0.2 mm (2.84″ × 3.78″ × 0.01″)
-
RF Antenna Area: 30 × 75 mm (1.18″ × 2.95″)
-
Adhesive: High-performance permanent adhesive optimized for glass
-
Weight: 1.8 g
-
Delivery Format: Roll form
-
Labels per Roll: 1000
-
Pitch on Reel: 130 mm (5.12″)
-
Core Inner Diameter: 76 mm (3″)
Environmental Resistance
-
Operating Temperature: –30°C to +85°C (–22°F to +185°F)
-
Peak Temperature: +85°C (+185°F)
-
Adhesive Service Temperature: Up to +70°C (+158°F)
-
Recommended Application Temperature: +10°C to +38°C
-
Water Resistance: IP67
-
UV & IR Resistance: Yes
-
Chemical Resistance: Resistant to chemical solvents and moisture
-
Storage Conditions: +23°C / 50% RH
Benefits
Advanced cryptographic authentication protects against cloning, fraud, and unauthorized duplication.
Non-transferable construction provides visible evidence of tampering and prevents label reuse.
Ideal for electronic tolling, parking management, vehicle registration, access control, and fleet tracking.
Related Products
The Beontag Heatwave Ultra is an RFID tag specifically designed for extreme temperature environments. With its exceptional temperature resistance and robust enclosure, this UHF RFID tag is ideal for applications where durability and reliability are crucial. The tag operates at both ETSI and FCC frequencies, allowing for global compatibility. It features the NXP UCODE 7xm+ IC, which provides excellent performance and reliability. The tag has a read range of up to 10 meters and is optimized for use on metallic surfaces. With its high-performance thermoplastic materials, the tag can withstand temperatures ranging from -35degree C to +85degree C.
It has been tested for peak temperatures of up to 235degree C and is resistant to various chemicals, including saltwater, motor oil, NaOh, sulfuric acid, and acetone. The Beontag Heatwave Ultra is IP68 rated, ensuring protection against dust and water ingress. With its long expected lifetime and multiple personalization options, this RFID tag is a reliable and versatile solution for a wide range of applications.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Crosswave Neo is an RFID label designed for reliable logistics with a 360-degree read angle, combined with the performance of the latest IC generation. This label is ideal for use in various industries, including logistics, supply chain management, and inventory tracking. With its RAIN RFID / EPCglobal Gen2v2 device type and global operational frequency of 865-928MHz, the Beontag Crosswave Neo offers exceptional read range and accuracy.
Its unique random 96-bit EPC in every label ensures secure and reliable identification. The label is compatible with non-metallic surfaces and provides constant reading performance in all orientations, even when using a linear reader antenna. With its environmental resistance and short-term use design, the Beontag Crosswave Neo is a reliable solution for efficient and accurate logistics management.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)