SIVA – VOYAGER™ 3rd License Plate TP – Tamper-Proof UHF RFID Windshield Label
The SIVA VOYAGER™ 3rd License Plate TP is a tamper-proof UHF RFID windshield label designed for secure vehicle identification, electronic toll collection, parking management, and anti-theft systems. Often referred to as a third license plate, this RFID label enables contactless vehicle recognition without line-of-sight, even at high speeds.
Engineered specifically for glass mounting, the label uses a conductive ink antenna optimized for windshield applications, delivering reliable long-range RFID performance across global UHF frequencies (860–960 MHz). The label is applied to the inside of the vehicle windshield, while printed vehicle information remains clearly readable from the outside.
With a non-transferable, tamper-proof construction, any attempt to remove or reposition the label results in visible damage—making it ideal for government vehicle registration programs, smart parking systems, toll roads, gated communities, and fleet access control.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C (Gen2v2)
-
Operational Frequency: Global 860–960 MHz
-
IC Type: Impinj Monza M4QT
-
Memory Configuration:
-
EPC: 128 bits
-
USER: 512 bits
-
Serialized TID
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 50 years
-
Read Range (2W ERP):
-
ETSI (on glass): up to 10 m (32.8 ft)
-
FCC (on glass): up to 10 m (32.8 ft)
-
-
Applicable Surface: Automotive glass (windshields)
Physical Specification
-
Face Stock: Special transparent plastic film
-
Label Construction: Adhesive side printable / non-adhesive outer side
-
Label Size (RF Area): 30 × 75 mm (1.18″ × 2.95″)
-
Overall Label Size: 72 × 96 × 0.2 mm (2.84″ × 3.78″ × 0.01″)
-
Adhesive: High-performance permanent adhesive with excellent bonding to glass
-
Weight: 1.8 g
-
Delivery Format: Roll
-
Labels per Roll: 1000
-
Pitch on Reel: 130 mm (5.12″)
-
Core Inner Diameter: 76 mm (3″)
Environmental Resistance
-
Operating Temperature: –20°C to +80°C (–4°F to +176°F)
-
Peak Temperature: +150°C (302°F) for 1 minute
-
Adhesive Service Temperature: –40°C to +85°C (–40°F to +185°F)
-
Recommended Application Temperature: –40°C to +85°C
-
Humidity Resistance: Up to 95% RH
-
Water Resistance: IP67
-
UV & IR Resistance: Yes
-
Chemical Resistance: Resistant to chemical solvents and moisture
Benefits
Non-transferable construction prevents label reuse and provides clear evidence of tampering.
Special antenna design ensures stable long-range RFID performance when applied to automotive glass.
Perfect for toll collection, parking access, fleet control, vehicle registration, and theft prevention programs.
Related Products
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Ferrowave Classic is an RFID on-metal label designed specifically for packaging and component tracking. It is a UHF RFID/EPCglobal Gen2v2 device that operates at frequencies of 865-869MHz (ETSI) and 902-928MHz (FCC). The label utilizes Impinj Monza R6-P, Impinj Monza 4E, or NXP UCODE 8m IC types, each with different memory configurations. The label’s electrical specification includes unique random EPC in every label for Monza R6-P and NXP UCODE 8m, and the same EPC in every label for Monza 4E. The read range varies depending on the surface material, with ranges of up to 12m for glass, 5m for plastic, 4m for metal, and 2m for liquid.
The label is printable on white PET with a high-performance acrylic adhesive for easy installation. It weighs only 0.8g and comes in a reel format with 800 good labels. The Beontag Ferrowave Classic is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperatures of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It is compatible with various printers, including Zebra, Sato, and Printronix models.
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Crosswave Classic is a dual-dipole label designed for logistics applications, offering excellent reading performance and a consistent radiation pattern. This UHF RFID label operates at a global frequency range of 860-960MHz and utilizes the Impinj Monza 4E IC for efficient and reliable performance. With a memory configuration of EPC 496 bit, TID 96 bit, and User 128 bit, this label provides ample storage capacity for tracking and identification purposes. The Beontag Crosswave Classic offers a read range of up to 10 meters on plastic and cardboard surfaces, making it suitable for a variety of non-metallic materials.
With its 360° readability, this label ensures constant reading performance in all orientations, even when using a linear reader antenna. The tag materials consist of a matt coated paper face material with a general purpose permanent adhesive for secure attachment. Available in different dimensions and delivery formats, the Beontag Crosswave Classic is a reliable and versatile solution for logistics and tracking applications.
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)