SIVA – VOYAGER™ Headlight TP DNA – Tamper-Proof UHF RFID Label
The SIVA VOYAGER™ Headlight TP DNA is a high-security, tamper-proof UHF RFID label specifically engineered for vehicle headlamp and headlight identification. Designed for permanent, non-transferable mounting, this RFID label enables secure, contactless vehicle recognition without line-of-sight, even in high-speed and outdoor environments.
Powered by the NXP UCODE DNA RFID chip, the Headlight TP DNA delivers advanced cryptographic authentication, making it ideal for applications that require anti-cloning, fraud prevention, and secure vehicle identity verification. Its conductive ink antenna is precisely tuned for polycarbonate (PC) headlamp surfaces, ensuring reliable long-range RFID performance when mounted directly on vehicle headlights.
The label incorporates IR and UV protection, high resistance to environmental exposure, and a destructive tamper-proof construction, making it perfectly suited for electronic toll collection (ETC), smart parking systems, vehicle access control, electronic vehicle registration, and intelligent transportation systems (ITS).
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 860–960 MHz
-
IC Type: NXP UCODE DNA
-
Memory Configuration:
-
EPC: 224 bits
-
USER Memory: 3072 bits
-
TID: 96 bits with 48-bit unique serial number
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 50 years
-
Read Range (2W ERP):
-
ETSI (on headlamp): up to 10.5 m (34.4 ft)
-
FCC (on headlamp): up to 8.5 m (27.9 ft)
-
-
Applicable Surface: Polycarbonate vehicle headlamps
Physical Specification
-
Face Stock: Special transparent plastic film
-
Label Size: 100 × 12 × 0.2 mm (3.93″ × 0.47″ × 0.01″)
-
Adhesive: High-performance permanent adhesive optimized for glass and PC surfaces
-
Weight: 0.14 g
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Pitch on Reel: 20.32 mm (0.8″)
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter: 140 mm (5.51″)
Environmental Resistance
-
Operating Temperature: –30°C to +85°C (–22°F to +185°F)
-
Peak Temperature: +85°C (+185°F)
-
Adhesive Service Temperature: Up to +70°C (+158°F)
-
Recommended Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Water Resistance: IP67
-
UV & IR Resistance: Yes
-
Chemical Resistance: Resistant to chemical solvents and moisture
-
Storage Conditions: +23°C / 50% RH
Benefits
Advanced cryptographic protection prevents cloning, duplication, and unauthorized reuse.
Destructive construction ensures permanent attachment and visible tamper evidence.
Ideal for tolling, parking, access control, vehicle registration, and secure transportation systems.
Related Products
The Beontag Heatwave Ultra is an RFID tag specifically designed for extreme temperature environments. With its exceptional temperature resistance and robust enclosure, this UHF RFID tag is ideal for applications where durability and reliability are crucial. The tag operates at both ETSI and FCC frequencies, allowing for global compatibility. It features the NXP UCODE 7xm+ IC, which provides excellent performance and reliability. The tag has a read range of up to 10 meters and is optimized for use on metallic surfaces. With its high-performance thermoplastic materials, the tag can withstand temperatures ranging from -35degree C to +85degree C.
It has been tested for peak temperatures of up to 235degree C and is resistant to various chemicals, including saltwater, motor oil, NaOh, sulfuric acid, and acetone. The Beontag Heatwave Ultra is IP68 rated, ensuring protection against dust and water ingress. With its long expected lifetime and multiple personalization options, this RFID tag is a reliable and versatile solution for a wide range of applications.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Ferrowave Classic is an RFID on-metal label designed specifically for packaging and component tracking. It is a UHF RFID/EPCglobal Gen2v2 device that operates at frequencies of 865-869MHz (ETSI) and 902-928MHz (FCC). The label utilizes Impinj Monza R6-P, Impinj Monza 4E, or NXP UCODE 8m IC types, each with different memory configurations. The label’s electrical specification includes unique random EPC in every label for Monza R6-P and NXP UCODE 8m, and the same EPC in every label for Monza 4E. The read range varies depending on the surface material, with ranges of up to 12m for glass, 5m for plastic, 4m for metal, and 2m for liquid.
The label is printable on white PET with a high-performance acrylic adhesive for easy installation. It weighs only 0.8g and comes in a reel format with 800 good labels. The Beontag Ferrowave Classic is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperatures of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It is compatible with various printers, including Zebra, Sato, and Printronix models.
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Carrier Dual is a versatile dual-frequency label designed for logistics and consumer interaction. This label combines RAIN RFID and NFC memory, making it suitable for a wide range of applications. With its RAIN RFID / EPCglobal Gen2v2 and NFC Forum Type 5 compatibility, it can be used with various air interface protocols. The label operates at different frequencies, with RAIN RFID at 865-928 MHz and NFC at 13.56 MHz. It features the EM Microelectronic EM4425 IC, which offers different memory configurations depending on the version. The label has a read range of up to 11m on cardboard and up to 10m on plastic for RAIN RFID, while for HF/NFC, it can be read by a mobile phone up to 3cm away or by a fixed reader up to 60cm away. The Beontag Carrier Dual is designed for non-metallic surfaces and is made of printable white PET with a high-performance acrylic adhesive.
It weighs less than 1g and comes in a delivery format of 1000 pcs/reel. With its excellent environmental resistance, including water resistance (tested for 5 hours in 1m deep water) and chemical resistance (no physical or performance changes after exposure to motor oil, salt water, sulfuric acid, NaOH, and acetone), this label is built to withstand harsh conditions. It has an operating temperature range of -35degree C to +85degree C and an expected lifetime of years in normal operating conditions. The Beontag Carrier Dual can be personalized with customer-specific encoding and visual marking, making it highly customizable. It is also printer compliant with the Zebra ZT411 printer.
- Device type: RAIN RFID / EPCglobal Gen2v2, NFC Forum Type 5
- Air interface protocol: ISO/IEC 18000-63, ISO/IEC 15693
- Operational frequency: RAIN RFID (865-928 MHz), NFC (13.56 MHz)
- IC type: EM Microelectronic EM4425
- Memory configuration: EM4425 V10 (HF: 64 bit UID, UHF: 288 bit EPC, 256 bit User, 96 bit TID, Shared user memory for HF and UHF: 1472 bits), EM4425 V12 (HF: 64 bit UID, UHF: 96 bit TID, 2048 bit configurable memory can be divided to 96 – 480 bit UHF EPC and shared user memory for HF and UHF, Web authentication uses AES-128 to create a onetime password (OTP) crypto signature)
- Read range: RAIN RFID (On cardboard up to 11m / 36 ft, On plastic up to 10m / 33 ft), HF/NFC (Mobile phone up to 3cm, Fixed reader up to 60cm)
- Applicable surface materials: Non-metallic surfaces
- Tag materials: Printable white PET, resin ribbon recommended
- Background adhesive: High performance acrylic adhesive optimized for low surface energy plastics
- Weight: <1g
- Delivery format: 1000 pcs / reel
- Pitch on reel: 38.1 mm / 5 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 36 x 70 x 0.2 mm / 41 x 2.75 x 0.01 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +90degree C / -31F to +194F
The Beontag Casey is a disposable high-performing label designed for supply chain and logistics applications. It utilizes UHF RFID technology with EPCglobal Gen2v2 compatibility. With an operational frequency of 865-928MHz, it offers a read range of up to 18m/60ft on both plastic and cardboard surfaces. The label features an Impinj® M730 IC chip with EPC 128bit and TID 96bit memory configuration. It is resistant to water (IP68) and various chemicals, including sulfuric acid, motor oil, saltwater, NaOH, and acetone.
The label is lightweight (0.6g) and comes in a delivery format of 2000 pcs on a reel. It has a tag dimension of 92 x 24 x 0.2mm and can withstand operating temperatures ranging from -35degree C to +85degree C. The Beontag Casey label offers reliable performance, durability, and customization options for efficient tracking and identification in diverse environments.