SIVA – VOYAGER™ 3rd License Plate TP – Tamper-Proof UHF RFID Windshield Label
The SIVA VOYAGER™ 3rd License Plate TP is a tamper-proof UHF RFID windshield label designed for secure vehicle identification, electronic toll collection, parking management, and anti-theft systems. Often referred to as a third license plate, this RFID label enables contactless vehicle recognition without line-of-sight, even at high speeds.
Engineered specifically for glass mounting, the label uses a conductive ink antenna optimized for windshield applications, delivering reliable long-range RFID performance across global UHF frequencies (860–960 MHz). The label is applied to the inside of the vehicle windshield, while printed vehicle information remains clearly readable from the outside.
With a non-transferable, tamper-proof construction, any attempt to remove or reposition the label results in visible damage—making it ideal for government vehicle registration programs, smart parking systems, toll roads, gated communities, and fleet access control.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C (Gen2v2)
-
Operational Frequency: Global 860–960 MHz
-
IC Type: Impinj Monza M4QT
-
Memory Configuration:
-
EPC: 128 bits
-
USER: 512 bits
-
Serialized TID
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 50 years
-
Read Range (2W ERP):
-
ETSI (on glass): up to 10 m (32.8 ft)
-
FCC (on glass): up to 10 m (32.8 ft)
-
-
Applicable Surface: Automotive glass (windshields)
Physical Specification
-
Face Stock: Special transparent plastic film
-
Label Construction: Adhesive side printable / non-adhesive outer side
-
Label Size (RF Area): 30 × 75 mm (1.18″ × 2.95″)
-
Overall Label Size: 72 × 96 × 0.2 mm (2.84″ × 3.78″ × 0.01″)
-
Adhesive: High-performance permanent adhesive with excellent bonding to glass
-
Weight: 1.8 g
-
Delivery Format: Roll
-
Labels per Roll: 1000
-
Pitch on Reel: 130 mm (5.12″)
-
Core Inner Diameter: 76 mm (3″)
Environmental Resistance
-
Operating Temperature: –20°C to +80°C (–4°F to +176°F)
-
Peak Temperature: +150°C (302°F) for 1 minute
-
Adhesive Service Temperature: –40°C to +85°C (–40°F to +185°F)
-
Recommended Application Temperature: –40°C to +85°C
-
Humidity Resistance: Up to 95% RH
-
Water Resistance: IP67
-
UV & IR Resistance: Yes
-
Chemical Resistance: Resistant to chemical solvents and moisture
Benefits
Non-transferable construction prevents label reuse and provides clear evidence of tampering.
Special antenna design ensures stable long-range RFID performance when applied to automotive glass.
Perfect for toll collection, parking access, fleet control, vehicle registration, and theft prevention programs.
Related Products
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag Ferrowave Micro is an RFID on-metal label specifically designed for short-term tracking of specialty retail items. With its small footprint and optimized performance on metal surfaces, this label is ideal for applications where tracking and identification of items is crucial. The label offers a read range of up to 4 meters on metal, making it highly efficient in inventory management and supply chain operations. Its compact size and durable construction ensure reliable performance in various environmental conditions.
The Beontag eKanban SLC is a single label designed for Small Load Carriers (SLC) that is compliant with VDA recommendations 4994 and 550. This UHF RFID label operates on the global frequency range of 860-928MHz and utilizes the Impinj Monza 4E IC. With a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit, this label offers a read range of up to 6 meters on plastic surfaces.
The label is made of thermal transfer printable paper with a yellow face color, and it is delivered on a reel with 600 pcs/reel. It is designed for short-term use and can withstand operating temperatures ranging from -20degree C to +70degree C. The Beontag eKanban SLC offers customer-specific encoding options and can be personalized with variable data printing.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 6 meters on plastic surfaces
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 80 mm x 0.2 mm / 8.19inchx 3.15inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short-term use, can last for years in normal operating conditions
- Personalization options: Pre-encoding, customer-specific visual printing
The Beontag Paper Reel Label is a high-performance UHF RFID label specifically designed for paper reel core tagging. It is ideal for applications where high dielectrics are present. This label operates on the global frequency range of 865-928MHz and uses the Impinj® M730 IC type. With a unique random 96-bit EPC in every label, it offers reliable and secure identification. The label has a read range of up to 10m/33ft in free air and up to 22m/72ft on plastic surfaces. It can also be used on paper reel cores, although the read range may vary depending on the type and amount of paper used. The Beontag Paper Reel Label is compatible with various surface materials such as plastic, wood, glass, and paper reel cores.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.
The Cruiser Windshield Crypto is an advanced RFID windshield tag designed for secure and efficient vehicle identification. Employing cutting-edge cryptographic technology, it ensures enhanced security against cloning and unauthorized access. With a sleek design and easy installation, it’s ideal for various applications including toll collection, parking management, and access control.
The Cruiser Windshield Crypto is a non-transferable tamper-proof label designed specifically for car windshields. It utilizes UHF RFID technology with an operational frequency of 860-960MHz. The label features the NXP UCODE DNA IC, which allows for a memory configuration of up to 224 bits for EPC, 3072 bits for user data, and 96 bits for TID. With a read range of up to 10 meters (ETSI) or 8 meters (FCC), the label is suitable for use on glass surfaces.
- Dimensions: 85.6 x 54 x 0 mm
- Operating Frequency: 860-960 MHz
- Chip Type: UCODE DNA
- Memory: 3072 bits user memory
- Material: PET
- Temperature Range: -40degree C to +85degree C
- Read Range: Up to 10 meters (depending on reader and environment)