SIVA – VOYAGER™ Headlight TP DNA – Tamper-Proof UHF RFID Label
The SIVA VOYAGER™ Headlight TP DNA is a high-security, tamper-proof UHF RFID label specifically engineered for vehicle headlamp and headlight identification. Designed for permanent, non-transferable mounting, this RFID label enables secure, contactless vehicle recognition without line-of-sight, even in high-speed and outdoor environments.
Powered by the NXP UCODE DNA RFID chip, the Headlight TP DNA delivers advanced cryptographic authentication, making it ideal for applications that require anti-cloning, fraud prevention, and secure vehicle identity verification. Its conductive ink antenna is precisely tuned for polycarbonate (PC) headlamp surfaces, ensuring reliable long-range RFID performance when mounted directly on vehicle headlights.
The label incorporates IR and UV protection, high resistance to environmental exposure, and a destructive tamper-proof construction, making it perfectly suited for electronic toll collection (ETC), smart parking systems, vehicle access control, electronic vehicle registration, and intelligent transportation systems (ITS).
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 860–960 MHz
-
IC Type: NXP UCODE DNA
-
Memory Configuration:
-
EPC: 224 bits
-
USER Memory: 3072 bits
-
TID: 96 bits with 48-bit unique serial number
-
-
Write Cycle Endurance: 100,000 cycles
-
Data Retention: Up to 50 years
-
Read Range (2W ERP):
-
ETSI (on headlamp): up to 10.5 m (34.4 ft)
-
FCC (on headlamp): up to 8.5 m (27.9 ft)
-
-
Applicable Surface: Polycarbonate vehicle headlamps
Physical Specification
-
Face Stock: Special transparent plastic film
-
Label Size: 100 × 12 × 0.2 mm (3.93″ × 0.47″ × 0.01″)
-
Adhesive: High-performance permanent adhesive optimized for glass and PC surfaces
-
Weight: 0.14 g
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Pitch on Reel: 20.32 mm (0.8″)
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter: 140 mm (5.51″)
Environmental Resistance
-
Operating Temperature: –30°C to +85°C (–22°F to +185°F)
-
Peak Temperature: +85°C (+185°F)
-
Adhesive Service Temperature: Up to +70°C (+158°F)
-
Recommended Application Temperature: +10°C to +38°C (+50°F to +100.4°F)
-
Water Resistance: IP67
-
UV & IR Resistance: Yes
-
Chemical Resistance: Resistant to chemical solvents and moisture
-
Storage Conditions: +23°C / 50% RH
Benefits
Advanced cryptographic protection prevents cloning, duplication, and unauthorized reuse.
Destructive construction ensures permanent attachment and visible tamper evidence.
Ideal for tolling, parking, access control, vehicle registration, and secure transportation systems.
Related Products
The Beontag Ironside Flex is a durable and versatile RAIN RFID tag designed for hard-to-tag items, offering industry-leading performance. This high-quality thermoplastic elastomer tag is optimized for a wide range of applications, including industrial and outdoor environments. Its robust design ensures reliable performance, even in extreme temperatures and harsh chemical exposures. With a read range of up to 20 meters, the Ironside Flex is ideal for assets made from various materials, including metal, making it an excellent choice for challenging environments. The tag can be attached using plastic cable ties or metallic wires.
The Beontag Ferrowave Flag is a versatile on-metal label designed for item-level asset and part tracking. It utilizes UHF RFID technology and operates on the EPCglobal Class1 Gen2 ISO 18000-6C air interface protocol. With a global operational frequency range of 865 – 928 MHz, this label offers excellent performance for tracking assets. The label features the Impinj Monza 4E IC type, which provides a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is optimized for use on metal surfaces but can also work on other materials.
The label can be attached to curved surfaces and has a read range of up to 12 meters on metal and 4 meters off metal. With its durable construction and resistance to various environmental conditions, the Beontag Ferrowave Flag is a reliable solution for asset tracking.
The Beontag ESD On Metal Label is a high-performance UHF RFID label optimized for ESD plastics. It is designed to be attached to various surfaces, including curved surfaces, and offers excellent performance and durability. With an operational frequency range of ETSI 865 – 869 MHz and FCC 902 – 928 MHz, this label is compatible with UHF RFID / EPCglobal Gen2v2 devices. The label features Impinj Monza 4E IC type and has a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. It is suitable for use on all surfaces, but it is specifically optimized for ESD plastics. The Beontag ESD On Metal Label offers a read range of up to 9m / 30ft on metal surfaces, 7m / 23ft on ESD plastics, 4m / 13ft on plastic surfaces, and 5m / 16ft on liquid containers. With its white PET surface and high tack adhesive, this label provides excellent printability and adhesion to all surfaces. It weighs only5g and comes in a delivery format of 300 good labels on a reel.
The Beontag ESD On Metal Label is resistant to a wide range of environmental conditions, including operating temperatures from -35degree C to +85degree C, peak temperature of +110degree C for 10 minutes, and water resistance up to 1m deep for 5 hours. It also exhibits excellent resistance to chemicals such as sulfuric acid, motor oil, saltwater, and NaOH. This label has a storage life of 1 year in +20degree C / 50% RH conditions. It is compatible with various printers, including Zebra, Sato, and Printronix models. The Beontag ESD On Metal Label offers personalization options such as pre-encoding, customized printing, and over-lamination. It is available in two product variants: Beontag ESD On Metal Label 80x35mm M4E ETSI and Beontag ESD On Metal Label 80x35mm M4E FCC.
The Beontag Paper Reel Label is a high-performance UHF RFID label specifically designed for paper reel core tagging. It is ideal for applications where high dielectrics are present. This label operates on the global frequency range of 865-928MHz and uses the Impinj® M730 IC type. With a unique random 96-bit EPC in every label, it offers reliable and secure identification. The label has a read range of up to 10m/33ft in free air and up to 22m/72ft on plastic surfaces. It can also be used on paper reel cores, although the read range may vary depending on the type and amount of paper used. The Beontag Paper Reel Label is compatible with various surface materials such as plastic, wood, glass, and paper reel cores.
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.
Beontag Carrier PRO stands out as a specialized washable label tailored for returnable plastic containers. Its exceptional performance, even amidst challenging materials, makes it the ultimate solution for tracking and managing your valuable assets. With durability and reliability at its core, this label ensures seamless asset management in demanding environments.