FEIG ID ANT.MUX.5 / ID ANT.MUX.M5 HF 5 Channel Multiplexer
The FEIG ID ANT.MUX.5 and ID ANT.MUX.M5 are HF 5-channel RFID multiplexers that expand a single reader output to up to 5 antenna connections at 13.56 MHz. Designed for installations where one reader must service multiple read zones, both models communicate with the reader directly over the antenna cable — no additional wiring required. When paired with the FEIG ID LR(M)5400 Long Range Reader, the system scales to support up to 20 antennas total. The ID ANT.MUX.5 ships in an IP65-rated industrial housing; the ID ANT.MUX.M5 is available as a bare module for embedded integration.
Specification
Physical Characteristics
- Dimensions (ID ANT.MUX.5): 125 mm W x 120 mm H x 85 mm D
- Dimensions (ID ANT.MUX.M5): 115 mm W x 75 mm H x 15 mm D
- Weight (ID ANT.MUX.5): 400 g
- Weight (ID ANT.MUX.M5): 60 g
- Housing (ID ANT.MUX.5): Polycarbonate with screwed plexiglas lid
- Housing (ID ANT.MUX.M5): No housing (module only)
- Protection Class (ID ANT.MUX.5): IP65
- Protection Class (ID ANT.MUX.M5): Not applicable
- Grommet (ID ANT.MUX.5): 7x screwed cable gland M16 x 1.5
- Grommet (ID ANT.MUX.M5): Not applicable
RF Characteristics
- Operating Frequency: 13.56 MHz
- RF Connections: 1x input SMA jack (50 Ohm); 5x output SMA jack (50 Ohm)
- RF Switch: Electronic switch; switching speed less than 1 ms
- Attenuation per Channel: max. 0.5 dB
- Max. Permissible Switching Power: 8 W
- Triggering: Via RF input of the reader
Power Requirements
- Supply Voltage: 12–24 V DC
- Power Consumption: max. 4.0 W
Connectivity
- Signal Indicators: 1x LED per channel; 4x LED (RUN / HF / Communication / Error)
Environmental Ratings
- Operating Temperature: -25°C to +65°C
- Storage Temperature: -40°C to +80°C
Regulatory Compliance
- EMC: EN 61000-6-3, EN 61000-6-2
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
- Shock: EN 60068-2-27, Acceleration: 30 g
Ordering Information
- ID ANT.MUX.5 (6215.000.00): HF Multiplexer, 5 channels, industrial housing
- ID ANT.MUX.M5 (6216.000.00): HF Multiplexer module, 5 channels, no housing
- ID ANT.MUX.M5.GMK (6696.000.00): 5-channel Antenna Multiplexer with Gates Mounting Kit included
Benefits
A single RFID reader output expands to 5 independently addressed antenna ports. Paired with the ID LR(M)5400, the system reaches up to 20 antennas — covering large facilities without additional readers or infrastructure.
The reader communicates with the multiplexer entirely through the existing antenna cable. No additional data cables or control connections are needed, reducing installation time and points of failure on the line.
Electronic switching at under 1 ms cycles through all connected antennas without mechanical parts. There is nothing to wear out, and each antenna switch is individually confirmed by a dedicated status LED.
Related Products
The ID SPAD.U is a shielded UHF desktop reader with integrated antennas, designed for contactless data exchange with UHF transponders. With its flat and modern design, it offers maximum reliability and excellent reading performance. It is suitable for various markets, including laundries, libraries, and retail, and can be used for applications such as laundry logistics, library item tracking, and file/document tracking.
- Dimensions: 376 mm x 276 mm x 26.8 mm
- Weight: approximately 2.0 kg
- Housing: Upper part – Plastic ABS, Cover plate – Acrylic glass (PMMA XT), Lower part – Galvanized metal sheet
- Protection class: IP30
- Power supply: 12 to 24 V DC ±15%
- Power consumption: max. 7 VA
- Operating frequency: 865 MHz to 868 MHz
- Transmitting power: 50 mW to 500 mW, configurable in up to 8 steps
- Interface: USB
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C (optional)
- Indicators: LED green, red, orange (mixed color), Buzzer
- Temperature range: Operation -25 degree C to +55 degree C, Storage -25 degree C to +70 degree C
- Relative humidity: 5% to 95% (non-condensing)
- Radio approval: Europe – EN 302 208, EMC – EN 301 489
- Safety: Low Voltage – EN 62368-1, Human Exposure – EN 50364
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID ANT.U290/290 and ID ANT.U580/290 are robust UHF RFID antennas designed for optimized reading performance. With circular polarization, these antennas allow for the identification of transponders in different orientations, enabling 3-dimensional identification in gate applications. They are suitable for both indoor and outdoor use, with a high protection class IP67 rating. These antennas have a modern and elegant design, and they are available in different dimensions and colors. They have TNC connectors and VESA connection for easy installation. The ID ANT.U580/290 has a 30° beam width, making it particularly suitable for vehicle identification and Free Flow Tolling systems.
- Dimensions (ID ANT.U290/290): 288 mm x 288 mm x 65 mm
- Dimensions (ID ANT.U580/290): 576 mm x 288 mm x 80 mm
- Housing: PC / Aluminium
- Color: Anthracite, translucent
- Weight (ID ANT.U290/290): 1,550 g
- Weight (ID ANT.U580/290): 3,850 g
- Protection class: IP67
- Gain (ID ANT.U290/290): Approx. 9 dBic
- Gain (ID ANT.U580/290): Approx. 11 dBic
- 3 dB beam width (ID ANT.U290/290): 65 x 65
- 3 dB beam width (ID ANT.U580/290): 30 x 65
- Polarization: Circular
- Antenna connection: TNC socket (50 ohm)
- Temperature range (ID ANT.U290/290): -25 degree C up to +55 degree C
- Temperature range (ID ANT.U580/290): Not specified
- Storage temperature range (ID ANT.U290/290): -25 degree C up to +80 degree C
- Tolerances: ±0.5 mm
The ID ANT40/30 and ID ANT100/100 are HF antennas designed for RFID proximity readers. They have an impedance of 50 ohm and operate at a frequency of 13.56 MHz. The antennas have a maximum transmitting power of 1 W and a data transfer rate of up to 424 kbits/s. The ID ANT100/100 has a reading distance of up to 14 cm. These antennas are suitable for applications such as eTicketing, eMobility, and Closed Loop Payment.
- Dimensions: ID ANT40/30 – 40 mm x 30 mm, ID ANT100/100 – 100 mm x 100 mm
- Interface: 2-pin connector or U.FL connector option
- Operating frequency: 13.56 MHz
- Impedance: 50 ohm
- Max. transmitting power: 1 W
- Max. reading distance: ID ANT40/30 – up to 7 cm, ID ANT100/100 – up to 14 cm
- Data transfer rate: ID ANT40/30 – up to 424 kbit/s, ID ANT100/100 – up to 212 kbit/s
- Power supply: Unneeded
- Temperature range: Operation -25 degree C up to +70 degree C, Storage -40degree C up to +85 degree C
- Relative air humidity: 0% up to 95% (non-condensing)
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.
The AT288N by ATID offers unparalleled efficiency in RFID data collection. With its advanced technology, this handheld reader empowers businesses to streamline their inventory management, asset tracking, and supply chain operations with precision and speed. Its ergonomic design ensures comfortable usage, while its robust build guarantees durability in various environments.
Elevate your RFID data collection capabilities with the AT288N by ATID. Engineered to excel in efficiency, this handheld reader revolutionizes inventory management, asset tracking, and supply chain operations. Its cutting-edge technology empowers businesses to capture data with unprecedented speed and accuracy, enhancing overall productivity and decision-making. Designed for user comfort and durability, the AT288N ensures seamless integration into diverse workflows, making it the ultimate solution for optimizing operational efficiency and gaining actionable insights.
- Supported protocols: UHF EPC Gen2, ISO / IEC 18000-6C, 6B, AEI (Rail)
- Connectivity: BT V2.1 + EDR / BLE V4.1
- Compatibility: Windows, Android & iOS Host
- Design: Compact & Handy design
- Drop: spec: 5m (5ft)
- IP65
- Reading Range: ~3M (According to Tag & Environment).
- Battery Life: a 3.7V 2,200mAh Lithium-Ion Battery (Rechargeable).
- Operating Temperature: -10degree C to 45degree C.
- Dimensions: 165mm x 75mm x 29mm
- Weight: 320 grams