HID – Janam XM75+ Rugged Touch Computer | Android 11 Mobile Computer With Built-In RFID, NFC, and Numeric Keypad
The HID Janam XM75+ is an Android 11 rugged touch computer built for input-intensive mobile workflows in transportation, logistics, field service, and delivery environments. Combining a 4.3-inch capacitive touch screen with a backlit 24-key numeric keypad, it is one of the only devices designed for workers who need both input methods in a single pocketable form factor. A 1.8 GHz Qualcomm Snapdragon octa-core processor, 4200mAh battery, IP67 sealing, MIL-STD 810G drop protection, built-in RFID/NFC (WWAN version), Honeywell 2D imager, and backward compatibility with XM75 accessories make the XM75+ a direct upgrade path for existing Janam deployments.
Specification
Physical Characteristics
- Dimensions: 3.02 in. x 6.53 in. x 1.15 in. / 76.83 mm x 166.01 mm x 29.27 mm
- Weight: 10.5 oz. / 300 g including battery
- Display: 4.3 in. WVGA (480 x 800 pixels) with Corning Gorilla Glass 3
- Touch Panel: Capacitive touch screen
- External Buttons: 24-key backlit numeric keypad; 2 external buttons
- Audio: 3.5 mm headset jack; speaker; two microphones
- Alerts: Vibration; dual-color LED indicators
- Motion Sensors: Gyroscope; accelerometer; light sensor; proximity sensor; digital compass
Technical
- Operating System: Android 11 with Google Mobile Services (GMS)
- Processor: 1.8 GHz Qualcomm Snapdragon octa-core
- Memory: 3 GB RAM / 32 GB storage
- Expansion: User-accessible microSD card slot; supports up to 512 GB using ExFAT file system
- Power: 4200 mAh 3.85V rechargeable Li-ion battery
Data Capture
- Imager: Honeywell N3601SR 2D Imager
- Camera: 8MP color rear-facing autofocus with user-controllable LED flash
- RFID / NFC (WWAN version only): Reads ISO14443A, ISO14443B, ISO15693; MIFARE UltraLight; MIFARE 1k/4k/DESFire; MIFARE DESFire EV1; Sony FeliCA; NFC Tag Types 1 to 5
Connectivity
- USB: MicroUSB port, USB 2.0 High-Speed
- WWAN: EDGE/GPRS/GSM 900/1800; WCDMA B1/2/5/6/8/19; LTE FDD B1/2/3/5/7/8/17/20; LTE TDD B40/41
- WLAN: 802.11a/b/g/n/ac/ax (ready)/d/h/i/k/r/v; 1×1 MU-MIMO
- WPAN: Bluetooth Class I v5.1 with BLE support
- GPS: Qualcomm GPS with GLONASS and Beidou support
- Security: WEP (40 or 104 bit); WPA/WPA2 Personal (TKIP, AES); WPA/WPA2 Enterprise (TKIP/AES); WPA3 Personal (SAE); WPA3 Enterprise (AES); WPA3 Enterprise 192-bit mode (GCMP 256); Enhanced Open (OWE); PEAP (MSCHAPv2, GTC); TLS; TTLS (PAP, MSCHAP, MSCHAPv2, GTC); PWD; SIM; AKA; AKA’; LEAP
Environmental Ratings
- Operating Temperature: -4°F to 140°F / -20°C to 60°C
- Storage Temperature: -13°F to 158°F / -25°C to 70°C
- Humidity: 95% non-condensing
- Drop: Multiple 5 ft. / 1.5 m drops to concrete on all sides across a wide temperature range per MIL-STD 810G
- Water and Dust: IP67
- ESD: +/- 15 kV air; +/- 8 kV contact
Accessories
- Single-Slot USB Cradle Kit
- Single-Slot Ethernet Cradle Kit
- Four-Slot Cradle Kit
- Four-Slot Battery Charging Kit
- Power Adapter
- Spare Battery
- Nylon Holster
- Operating Case
- Stylus with Tether
- Handstrap
- Trigger Handle
Regulatory Compliance
- Safety: IEC/EN-60950-1, cUL 60950-1, UN38.3, UL2054/UL1642, IEC62133, KC, PSE
- Radio: FCC, CE (EMC, RF, SAR, RED), IC
- Environmental: RoHS, WEEE Compliant, NRCAN
Benefits
The XM75+ is purpose-built for workers who enter data by hand in the field. The backlit 24-key numeric keypad and 4.3-inch capacitive touch screen operate independently, so workers choose the input method that fits the task without switching devices or using attachments.
The WWAN version combines a Honeywell 2D imager, built-in RFID/NFC reader supporting ISO14443, ISO15693, and NFC Types 1–5, plus 4G LTE cellular in one IP67-sealed device — eliminating the need to carry separate scanners or sleds for multi-modal data capture workflows.
The XM75+ accepts all existing XM75 accessories — cradles, holsters, trigger handles, and charging kits — so operations upgrading from the XM75 platform reuse deployed infrastructure rather than replacing it, reducing the total cost of the upgrade.
Related Products
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID ANT800/600-DA HF Loop Antenna is a versatile and high-performance antenna designed for use with HF readers. With a read range of up to 100 cm and a transmitting power of 8 W, this antenna is capable of delivering reliable and efficient RFID communication. Its easy setup, integrated dynamic antenna tuner, and IP65 protection class make it suitable for various applications.
- Dimensions: 852 mm x 620 mm x 40 mm
- Weight: approximately 2.5 kg
- Housing: Plastic ABS
- Color: Black
- Protection class: IP65
- Operating temperature range: -25 degree C up to +55 degree C
- Storage temperature range: -25 degree C up to +60 degree C
- Relative air humidity: 5% up to 95% (not condensing)
- Operating frequency: 13.56 MHz
- Max. transmitting power: 8 W
- Permitted transmitting power:
- EU (EN 300 330): 4 W
- USA (FCC Part 15): 2 W
- Canada (RSS-210): 2 W
- Read range: up to 100 cm*
- Antenna connection: 1 x SMA plug (50 ohm)
- Antenna connection cable: RG58, 50 ohm, approximately 3.6 m
The ID ANT240/180-A is a flat and compact pad antenna designed for contactless data exchange with RF RFID transponders. With a read range of up to 42 cm, it is suitable for use in enclosed spaces such as offices, libraries, and file tracking applications. The antenna features a sleek design and can be connected directly to a reader with an included coaxial cable.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.36 kg (0.8 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic plate
- Colour: Black pad and similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG174 coaxial cable with SMA connector (50 ohm); approx. 2.2m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)