FEIG – ID CPR40.30-A
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
Specification
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
Benefits
The ID CPR40.30-A supports a wide range of transponders, including mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, and NFC Devices in Card Emulation Mode. This ensures compatibility with various applications such as eTicketing, eDocument, loyalty cards, and public transport.
With the “SoftCrypto” and “SAMCrypto high level” functions, the desktop reader provides a secure and efficient interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C. This ensures the protection of sensitive information and enhances data security.
The ID CPR40.30-A comes with Software Development Kits for Windows (C++, .NET, Java), LINUX (C++, Java), and Raspberry Pi, making it easy to integrate into existing systems and develop customized applications. The RS232 interface allows seamless connectivity with host devices, providing a user-friendly experience.
Related Products
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C
The ID ANT.MUX/ ID ANT.MUX.M8is an HF 8 channel Multiplexer that allows for the operation of up to 8 antennas with just one reader. It facilitates communication between the reader and the multiplexer via an antenna cable. The outputs of the multiplexer can be controlled by the reader, a host, or digital inputs. It features non-wearing electronic switching of the outputs and has a high switching rate of less than 1 ms. The multiplexer is available in a housing or as a module, with options for 8 channel or 4 channel configurations.
- Dimensions (w x h x d): 182 x 110 x 90 mm
- Weight: approximately 550 g
- Housing: Plastic ASA, with screwed plexiglas lid
- Protection class: IP65
- Operating frequency: 13.56 MHz
- Grommet: 12 x screwed cable gland M16 x 5
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 2x input (SMA jack), 8x output (SMA jack)
- RF switch: electronic switch with switching speed less than 1 ms
- Triggering: Reader via RF input 1, external pulse generator via digital input
- Digital inputs: 1x optocoupler (max. 24 V DC / 20 mA)
- Signal indicators: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C up to +65 degree C, Storage: -40 degree C up to +80 degree C
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
The ATS200 is a sophisticated RFID handheld reader designed for seamless data collection and management in diverse industries. Its ergonomic design coupled with robust performance makes it an indispensable tool for inventory management, asset tracking, and logistics operations. With its intuitive interface and high-speed data processing capabilities, the ATS200 elevates operational efficiency to new heights.
The ATS200 is a compact and lightweight device, making it easy to carry and use in a variety of environments. It also has a long battery life, allowing it to be used for extended periods of time without requiring a recharge. It can be connected to a mobile device or computer for real-time data transfer and analysis. It is also equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows.