SIVA – Sprintt-Slim RAIN RFID Race Timing Tag
The SIVA Sprintt-Slim is a 1.6 mm thin UHF RAIN RFID foam tag from the Sprintt Race Timing Solutions series, purpose-built for affixing directly onto race number bibs for marathon, triathlon, running event, and mass participation race timing applications. Built on the Impinj M830 Dogbone IC and operating at ETSI 865–928 MHz with 128-bit EPC and 96-bit TID memory, it delivers 18 m / 59.05 ft read range in free air and 4 m / 13.12 ft read range on the human body, enabling reliable chip detection at finish lines, timing mats, and intermediate split points even when bibs move during running.
At 98 x 30 x 1.6 mm on a white PE foam face with high-performance permanent adhesive, the Sprintt-Slim is thin and flexible enough to sit flat on a paper bib without creating bulk or discomfort for the athlete. Its transparent release liner is designed specifically for easy gap sensing on thermal transfer printers, making it compatible with major industrial RFID printers for on-demand bib encoding and printing in a single pass. Installation is straightforward: the tag is placed on the back of the race bib at the pre-identified location, pressed firmly from center outward for full adhesive contact, with safety pins placed at the bib corners only, not over the tag.
Each reel ships 1,000 100%-tested labels with a label pitch of 33 mm, packaged 2,000 pcs per box. IP67 rated and operating from -35°C to +85°C, the Sprintt-Slim performs reliably in outdoor race conditions including rain and wet weather. Customer-specific EPC encoding and custom printed artwork including logos, text, numbers, and barcodes in black are available on request under part number RF.1.6FT.De.9830.M83.
Specification
Physical Characteristics
- Label Size: 98 mm x 30 mm x 1.6 mm / 3.85 in. x 1.18 in. x 0.062 in.
- Face Material: White PE Foam (wax ribbon recommended)
- Adhesive: High performance permanent adhesive
- Release Liner: Transparent (for easy gap sensing on printers)
- Label Pitch: 33 mm / 1.29 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 1,000 pcs per reel; 100% performance checked
- Packaging: 2,000 pcs per box
- Part Number: RF.1.6FT.De.9830.M83
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (ETSI): 865–928 MHz
- IC: Impinj M830 (Dogbone)
- Memory Configuration: EPC 128 bit; TID 96 bit
- Applicable Surface Materials: For application onto race timing bibs
Performance
- Read Range in Free Air (2W ERP): 18 m / 59.05 ft
- Read Range on Human Body (2W ERP): 4 m / 13.12 ft
Printer Compatibility
- Compatible Printer Types: Major industrial RFID thermal transfer printers
- Sensor Type: Gap (transparent release liner for easy gap sensing)
Installation Notes
- Place race bib face down on a clean, flat surface
- Peel tag from liner and place firmly at the pre-identified bib location; avoid touching the adhesive or bending the tag
- Apply gentle, even pressure from center outward for full adhesive contact
- Place safety pins at bib corners only; do not place safety pins over the tag
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- IP Classification: IP67
- Storage Condition: 1 year at +20°C / 73.4°F at 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes in black
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
At 4 m on the human body, the Sprintt-Slim reads consistently as athletes cross timing mats at full running speed, reducing missed reads caused by bib movement, body angle, or crowd density at high-volume race finish areas.
The PE foam construction keeps the tag flexible and flat against the paper bib surface, so athletes feel no rigid lump or raised edge during the race, and the tag does not peel or lift at the corners under sweat and weather conditions.
The transparent release liner is engineered specifically for gap sensing on industrial RFID printers, letting race organisers print athlete numbers, barcodes, and event artwork directly onto the tag face and encode the EPC in a single printer pass without manual intervention.
Related Products
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag eKanban GTL is a Master Global Transport Label (GTL) compliant with VDA recommendations 4994 and 5501. It is a UHF RFID / EPCglobal Gen2v2 device that operates at a global frequency range of 860-928MHz. With its Impinj Monza 4E IC type, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. This label is designed for use on transport packaging units or plastic load carriers, providing a read range of up to 10 meters on plastic.
The label is made of thermal transfer printable paper with a yellow face color, and it comes in a reel format with 600 pcs/reel. With an operating temperature range of -20degree C to +70degree C, it is suitable for various environmental conditions. The Beontag eKanban GTL offers personalization options such as customer-specific encoding and visual printing, making it a versatile and reliable solution for supply chain management.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 10 meters on plastic
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 150 mm x 0.2 mm / 8.19inchx 5.91inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short term use, can last for years in normal operating conditions
- Pre-encoding: Customer-specific encoding of EPC or user memory
The Beontag Cruiser Windshield is a non-transferable tamper-evident label designed specifically for car windshields. This UHF RFID / EPCglobal Gen2v2 device operates at a global frequency range of 860-960MHz. It is equipped with either the Impinj Monza 4E or Alien Higgs 3 IC, depending on the customer’s preference. The memory configuration varies depending on the IC type, with the Monza 4E offering EPC 496 bit, User 128 bit, and TID 96 bit, while the Higgs3 offers EPC 96-496 bit, User 64-512 bit, and TID 96 bit. The read range of this label is up to 8 meters (26 feet) on windshields, making it suitable for various applications. It is compatible with glass surfaces and performs optimally in non-reflective environments. The tag materials used include PP with strong adhesion on the back side towards the windshield, and inkjet and thermal transfer printable PP on the front side towards the driver. The label weighs only 1g and comes in a delivery format of 1500 pieces on a reel. With a tag dimension of 92 x 26 x 0.2 mm, it is compact and unobtrusive.
The Beontag Cruiser Windshield is designed to withstand a wide range of temperatures, from -35degree C to +70degree C (-31F to +158F), ensuring its durability in various climates. It has an expected lifetime of several years under normal operating conditions. With options for pre-encoding, customized dual-sided full-color artwork, and customer-specific visual printing, this label offers flexibility and personalization. Installation instructions are provided to ensure optimal performance and longevity of the label. Overall, the Beontag Cruiser Windshield is a reliable and secure solution for car windshield labeling, providing tamper-evident protection and efficient identification.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-960MHz
- IC type: Impinj Monza 4E or Alien Higgs 3 (upon special request)
- Memory configuration:
- Monza 4E: EPC 496 bit, User 128 bit, TID 96 bit
- Higgs3: EPC 96-496 bit, User 64-512 bit, TID 96 bit
- Read range (2W ERP): Up to 8 m / 26 ft on windshields
- Applicable surface materials: Glass
- Tag materials:
- Back side (towards windshield): PP with strong adhesion on glass
- Front side (towards driver): Inkjet and thermal transfer printable PP
- Weight: 1g
- Delivery format: 1500 pcs on reel
- Pitch on reel: 33,866 mm / 1,333inch
- Reel core inner diameter: 76 mm / 3inch
- Tag dimensions: 92 x 26 x 0.2 mm / 3.62 x 02 x 0.01 in
- Operating temperature: -35degree C to +70degree C / -31F to +158F
- Ambient temperature: -35degree C to +70degree C / -31F to +158F
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Years in normal operating conditions
- Personalization options: Pre-encoding, customized dual-sided full-color artwork, customer-specific visual printing
The Beontag Casey is a disposable high-performing label designed for supply chain and logistics applications. It utilizes UHF RFID technology with EPCglobal Gen2v2 compatibility. With an operational frequency of 865-928MHz, it offers a read range of up to 18m/60ft on both plastic and cardboard surfaces. The label features an Impinj® M730 IC chip with EPC 128bit and TID 96bit memory configuration. It is resistant to water (IP68) and various chemicals, including sulfuric acid, motor oil, saltwater, NaOH, and acetone.
The label is lightweight (0.6g) and comes in a delivery format of 2000 pcs on a reel. It has a tag dimension of 92 x 24 x 0.2mm and can withstand operating temperatures ranging from -35degree C to +85degree C. The Beontag Casey label offers reliable performance, durability, and customization options for efficient tracking and identification in diverse environments.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.
The Beontag Captura Flash is a fast-to-attach tamper-proof seal tag designed for logistics applications. It features a durable enclosure and is equipped with RAIN RFID / EPCglobal Gen2v2 technology. With an operational frequency of 865 – 928 MHz and an NXP UCODE 8m IC type, this tag offers reliable performance.
It has a memory configuration of EPC 96 bit, User 32 bit, and TID 96 bit, with a unique number encoded as a default in the EPC memory. The tag can be attached to assets with a maximum diameter of 12mm and has a read range of up to 12m when hanging from metal.
- Device Type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865 – 928 MHz
- IC type: NXP UCODE 8m
- Memory configuration: EPC 96 bit, User 32 bit, TID 96 bit
- EPC memory content: Unique number encoded as a default
- Read range (2W ERP):
- Hanging from metal: up to 12m / 40ft
- Hanging from plastic: up to 3m / 10ft
- Hanging from cable: up to 2m / 6ft
- Applicable surface materials: All surfaces, optimized for metal
- Tag materials: High quality engineering plastics
- Weight: 6g
- Delivery format: Single
- Amount in box: 150 pcs
- Dimensions:
- Open: 125.7mm x 20mm x 15mm (4.95″ x 0.78″ x 0.59″)
- Closed: 61mm x 20mm x 10mm (2.4″ x 0.78″ x 0.4″)
- Environmental resistance:
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Short term peak temperature: +130degree C / 266F for 10min
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- IP classification: IP68
- Washing resistance: Designed to tolerate standard industrial washing processes. Real environment testing recommended.
- Chemical resistance: No physical or performance changes in motor oil exposure (168h), sulfuric acid exposure (minutes), or NaOH exposure (minutes). Acetone should be avoided.
- Expected lifetime: Years in normal operating conditions