SIVA – Ferro MoM 6024 ESD ETSI RAIN RFID On-Metal Label
The SIVA Ferro MoM HTP 6024 ETSI is a high-temperature resistant RAIN RFID on-metal UHF label designed for tracking metal assets that pass through repeated high-temperature process cycles including paint cure ovens, powder coating, heat treatment, and industrial sterilisation in European facilities operating under ETSI 865–868 MHz frequency regulations. Built on the NXP UCODE 9xm IC with 496-bit EPC, 96-bit TID, and 752-bit user memory, it delivers 4 m / 13.12 ft read range on metal under ETSI power limits and withstands short-term peak temperatures of +230°C / +446°F for 30 minutes across 3 cycles, and long-term continuous operation at +150°C / +302°F.
What distinguishes the MoM HTP 6024 ETSI from standard on-metal labels is its high-temperature resistant printable white film face, replacing standard PET with a material capable of surviving repeated thermal cycling without delaminating, discolouring, or losing adhesion to the metal surface. At 60 x 24 x 1.39 mm with high-performance adhesive and spacer labels included for print head protection, it is compatible with Zebra ZT411 On-Metal, SATO CL4NX Plus, and Printronix T6000e printers. It applies to flat and curved surfaces with a minimum bending diameter of 100 mm, with spacer labels peeled from both sides before applying the RFID label to the asset. IP68 rated at 1 m for 5 hours, it also withstands 168 hours each in salt water, motor oil, and sulfuric acid (10%) without physical or performance changes. Each reel contains 500 100%-tested labels, packaged 500 pcs per box and 4 boxes per carton, under part number RF.LM.HTP6024.E.U9xm.
Specification
Physical Characteristics
- Label Size: 60 mm x 24 mm x 1.39 mm / 2.36 in. x 0.94 in. x 0.005 in.
- Face Material: High-temperature resistant printable white film (resin ribbon recommended)
- Adhesive: High performance adhesive with excellent adhesion to all surfaces
- Minimum Bending Diameter: 100 mm
- Label Pitch: 31.75 mm / 1.25 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 500 pcs per reel (100% performance checked); spacer labels included for print head protection and ribbon stability
- Packaging: 500 pcs per box; 4 boxes per carton
- Part Number: RF.LM.HTP6024.E.U9xm
Peeling Instructions
- First peel and remove spacer labels from both sides of the RFID label
- After removing spacer labels, peel the actual RFID label and apply it to the asset
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (ETSI): 865–868 MHz
- IC: NXP UCODE 9xm
- Memory Configuration: EPC 496 bit; TID 96 bit; USER 752 bit
- Applicable Surface Materials: Metallic surfaces
Performance
- Read Range on Metal (2W ERP): 4 m / 13.12 ft
Printer Compatibility
- Tested Printers: Zebra ZT411 On-Metal; SATO CL4NX Plus; Printronix T6000e series
- Compatible Printer Types: Industrial grade thermal transfer UHF printers
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Peak Temperature (long term): +150°C / +302°F continuous
- Peak Temperature (short term): +230°C / +446°F for 30 minutes x 3 cycles
- IP Classification: IP68 (tested for 5 hours in 1 m deep water)
- Chemical Resistance (no physical or performance changes): 168 hours salt water (salinity 10%) exposure; 168 hours motor oil exposure; 168 hours sulfuric acid (10%, pH 2) exposure; 12 hours NaOH (10%, pH 13) exposure
- Note: Acetone should be avoided
- Storage Condition: 1 year at +20°C / 73.4°F at 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes in black
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
The high-temperature resistant face film and adhesive keep the label intact and the inlay functional through up to 3 cycles of 30 minutes at 230°C, allowing metal parts to pass through powder coating ovens, paint cure lines, and heat treatment processes without untagging and retagging between runs.
With 752 bits of writable user memory on the NXP UCODE 9xm IC, the MoM HTP 6024 ETSI stores cycle counts, batch numbers, temperature logs, and inspection records directly on the label attached to the part, making the asset self-documenting at every stage of the production process.
Unlike standard on-metal labels where the face material discolours or delaminates at elevated temperatures, the HTP 6024 ETSI uses a high-temperature resistant white film that keeps printed barcodes, text, and asset numbers readable after repeated thermal cycling — preserving both RFID and visual identification in the same label.
Related Products
The Beontag Ironside Classic is a highly durable tag designed for challenging industrial asset management applications. It is specifically optimized for use on metal surfaces, making it ideal for tracking and managing assets in industries such as manufacturing, logistics, and construction. With its robust construction and resistance to extreme temperatures, chemicals, and weather conditions, this tag ensures reliable and long-lasting performance in even the harshest environments. The Beontag Ironside Classic is the ultimate solution for efficient and effective asset management.
The Beontag Crosswave Classic is a dual-dipole label designed for logistics applications, offering excellent reading performance and a consistent radiation pattern. This UHF RFID label operates at a global frequency range of 860-960MHz and utilizes the Impinj Monza 4E IC for efficient and reliable performance. With a memory configuration of EPC 496 bit, TID 96 bit, and User 128 bit, this label provides ample storage capacity for tracking and identification purposes. The Beontag Crosswave Classic offers a read range of up to 10 meters on plastic and cardboard surfaces, making it suitable for a variety of non-metallic materials.
With its 360° readability, this label ensures constant reading performance in all orientations, even when using a linear reader antenna. The tag materials consist of a matt coated paper face material with a general purpose permanent adhesive for secure attachment. Available in different dimensions and delivery formats, the Beontag Crosswave Classic is a reliable and versatile solution for logistics and tracking applications.
The Beontag Carrier HF is a high-frequency RFID label designed for non-metallic surfaces. It is available in two variants: NTAG213 and SLIX2, which comply with NFC Forum Type 2 and Type 5 standards respectively. With an operational frequency of 13.56 MHz, this label offers reliable and secure communication. The Beontag Carrier HF is suitable for a wide range of applications, including asset tracking, inventory management, and supply chain optimization. Its key benefits include excellent read range, durable construction, and compatibility with various printing and encoding options.
The Beontag Steelwave Flex is a global and compact UHF RFID label specifically designed for use on metallic surfaces. It offers flexible attachment on curved assets, making it versatile and adaptable for various applications. This label is optimized for use on metal surfaces, providing reliable and accurate tracking and identification. With its high-quality printing surface and excellent adhesion to all surfaces, including low surface energy plastics and painted metal, the Beontag Steelwave Flex ensures durability and longevity. It is compatible with Custom Zebra ZT410 RFID Silverline and ZT411 On-Metal printers, making it easy to integrate into existing systems.
The Beontag Casey is a disposable high-performing label designed for supply chain and logistics applications. It utilizes UHF RFID technology with EPCglobal Gen2v2 compatibility. With an operational frequency of 865-928MHz, it offers a read range of up to 18m/60ft on both plastic and cardboard surfaces. The label features an Impinj® M730 IC chip with EPC 128bit and TID 96bit memory configuration. It is resistant to water (IP68) and various chemicals, including sulfuric acid, motor oil, saltwater, NaOH, and acetone.
The label is lightweight (0.6g) and comes in a delivery format of 2000 pcs on a reel. It has a tag dimension of 92 x 24 x 0.2mm and can withstand operating temperatures ranging from -35degree C to +85degree C. The Beontag Casey label offers reliable performance, durability, and customization options for efficient tracking and identification in diverse environments.
The Beontag Captura Flash is a fast-to-attach tamper-proof seal tag designed for logistics applications. It features a durable enclosure and is equipped with RAIN RFID / EPCglobal Gen2v2 technology. With an operational frequency of 865 – 928 MHz and an NXP UCODE 8m IC type, this tag offers reliable performance.
It has a memory configuration of EPC 96 bit, User 32 bit, and TID 96 bit, with a unique number encoded as a default in the EPC memory. The tag can be attached to assets with a maximum diameter of 12mm and has a read range of up to 12m when hanging from metal.
- Device Type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865 – 928 MHz
- IC type: NXP UCODE 8m
- Memory configuration: EPC 96 bit, User 32 bit, TID 96 bit
- EPC memory content: Unique number encoded as a default
- Read range (2W ERP):
- Hanging from metal: up to 12m / 40ft
- Hanging from plastic: up to 3m / 10ft
- Hanging from cable: up to 2m / 6ft
- Applicable surface materials: All surfaces, optimized for metal
- Tag materials: High quality engineering plastics
- Weight: 6g
- Delivery format: Single
- Amount in box: 150 pcs
- Dimensions:
- Open: 125.7mm x 20mm x 15mm (4.95″ x 0.78″ x 0.59″)
- Closed: 61mm x 20mm x 10mm (2.4″ x 0.78″ x 0.4″)
- Environmental resistance:
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Short term peak temperature: +130degree C / 266F for 10min
- Ambient temperature: -35degree C to +85degree C / -31F to +185F
- IP classification: IP68
- Washing resistance: Designed to tolerate standard industrial washing processes. Real environment testing recommended.
- Chemical resistance: No physical or performance changes in motor oil exposure (168h), sulfuric acid exposure (minutes), or NaOH exposure (minutes). Acetone should be avoided.
- Expected lifetime: Years in normal operating conditions