FEIG – ID CPR46.10
The ID CPR46.10 is a robust RFID Card Reader designed for flush mounting in machines, self-service kiosks, and terminals made of metal. It offers high protection against environmental influences and vandalism, making it ideal for outdoor and high-traffic areas. With its automatic power management and low standby power consumption, it is suitable for solar- and battery-powered machines. The reader supports encrypted data transfer and has a compact design for easy installation.
Specification
- Dimensions: 120 mm x 120 mm x 33 mm (overall dimensions), 85 mm x 85 mm (visible cutout after installation)
- Weight: Approximately 250 g
- Housing: Plastic
- Protection class: IP65 (front), IP30 (back)
- Impact resistance level: IK10
- Supply voltage: 5 V DC or 8 V-42 V DC
- Power consumption: Operation – 500 mA maximum, Standby-Mode – approx. 100 microA (5 V input voltage)
- Operating frequency: 13.56 MHz
- RFID Interfaces: ISO/IEC 14443-A/-B EMV Contactless Level 1 (tested according to version 2.1)
- Antenna: Integrated
- Smart card interface: 4 SAM sockets according to ISO 7816 (variant ID CPR46.10-4SUSB)
- MTBF: 500,000 hours
- Optical indicators: 4 green LEDs (EMV-Mode) or green/yellow/red LED
- Buzzer: Integrated
- Supported transponders: Mifare classic (mini, 1k, 4k), Mifare UltraLight, Mifare DESFire, Smart MX, my-d proximity, SLE44R35S, SLE55R, JewelTM, SLE66CL, ST19XR34, Rf360, NFC Type 1, 2 and 4 in Read/Write and NFC Card-Emulation-Mode
- Software development kits: Windows (C++, .NET, Java), Linux (C++, Java), Raspberry Pi
- Temperature range: Operation – -25degree C to +70degree C, Storage – -40degree C to +80degree C
- Relative humidity: 0% to 95% (non-condensing)
Benefits
The ID CPR46.10 offers IP65 protection on the front and IK10 impact resistance, ensuring maximum durability and resistance against environmental influences and vandalism.
The reader supports various transponders, including Mifare, Smart MX, my-d proximity, and NFC Type 1, 2, and 4, making it compatible with a wide range of RFID cards and devices.
With its compact design and multiple host interfaces (USB, RS232, RS232-LVTTL), the ID CPR46.10 can be easily integrated into existing systems and machines, providing seamless RFID functionality.
Related Products
The ID SPAD.U is a shielded UHF desktop reader with integrated antennas, designed for contactless data exchange with UHF transponders. With its flat and modern design, it offers maximum reliability and excellent reading performance. It is suitable for various markets, including laundries, libraries, and retail, and can be used for applications such as laundry logistics, library item tracking, and file/document tracking.
- Dimensions: 376 mm x 276 mm x 26.8 mm
- Weight: approximately 2.0 kg
- Housing: Upper part – Plastic ABS, Cover plate – Acrylic glass (PMMA XT), Lower part – Galvanized metal sheet
- Protection class: IP30
- Power supply: 12 to 24 V DC ±15%
- Power consumption: max. 7 VA
- Operating frequency: 865 MHz to 868 MHz
- Transmitting power: 50 mW to 500 mW, configurable in up to 8 steps
- Interface: USB
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C (optional)
- Indicators: LED green, red, orange (mixed color), Buzzer
- Temperature range: Operation -25 degree C to +55 degree C, Storage -25 degree C to +70 degree C
- Relative humidity: 5% to 95% (non-condensing)
- Radio approval: Europe – EN 302 208, EMC – EN 301 489
- Safety: Low Voltage – EN 62368-1, Human Exposure – EN 50364
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The UHF near-field antenna ID ANT.U82/82 is a compact and high-performance antenna that is ideal for use in enclosed spaces. With its small form factor and defined near-field reading area, it can be installed almost anywhere. It operates in a wide frequency range of 864-928 MHz, making it suitable for worldwide use.
- Dimensions: 82 mm x 82 mm x 9.5 mm
- Weight: approximately 50 g
- Housing: ABS material
- Color: anthracite
- Max. input power: 1 W
- Antenna connector: SMA (female)
- Anti-static Protection/Antenna Detection: 60 Ohm DC Resistance (typical)
- Operating frequencies: 864 MHz up to 928 MHz
- Temperature range:
- Operation: 0degree C up to +50degree C
- Storage:-30degree C up to +60degree C
The ID ANT240/180 Pad Antenna is a highly efficient and compact solution for contactless data exchange with RFID transponders. Its flat and sleek design allows it to seamlessly fit into desktop environments, making it ideal for file tracking, library applications, and office use. The antenna provides an impressive read range of up to 42 cm, ensuring reliable performance in close-range RFID applications. Equipped with an optical feedback feature via a blue LED, the antenna offers real-time operational status updates. It connects easily to RFID readers using the included coaxial cable, providing a hassle-free installation process.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 in x 7.09 in x 0.51 in)
- Weight: 0.36 kg (0.8 lbs)
- Housing: Upper part Plastic ABS, lower part Plastic plate
- Color: Black (Pad), White (Upper part, RAL 9003)
- Protection Class: IP30
- Operating Frequency: 13.56 MHz
- Max. Transmitting Power:5 W
- Antenna Connection: RG174 coaxial cable with SMA connector (50 ohm), 2.2 m long
- Indicator: 1 Blue LED for operational status (switchable via DC voltage)
- Operating Temperature: -25degree C to +55degree C (-13F to 131F)
- Storage Temperature: -25degree C to +70degree C (-13F to 158F)
- Relative Humidity: 5% to 95% (non-condensing)
- Standard Compliance: EMC EN 301 489, Safety & Health EN 62368-1, EN 50364
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C