FEIG – ID CPR50.10-E
The ID CPR50.10-E is a wall mountable RFID card reader designed for IP-based systems. It supports transponders following ISO standards 14443-A & -B and ISO 15693, as well as NFC devices. With its fast Ethernet interface and Power over Ethernet (PoE) capability, it can be easily integrated into existing LAN networks. The reader modes “Polling Mode” and “Notification Mode” optimize data transfer between the card reader and the host system. It is suitable for both indoor and outdoor use, with an IP54 protection class.
Specification
- Dimensions (Card reader): 84.2 mm x 84.2 mm x 22 mm
- Dimensions (Wall-mounted housing): 77.7 mm x 77.7 mm x 18 mm
- Weight: Approx. 150 g
- Housing: Plastic ASA
- Front panel: Acrylic glass
- Color (Corpus): White
- Color (Front panel): Black
- Protection class: IP54
- Operating frequency: 13.56 MHz
- RF transmitting power: 250 mW ±2 dB
- Supply voltage: Power over Ethernet (PoE), IEEE802.3af, or external power supply 24 V up to 48 V DC ±10%
- Power consumption: Max. 3.8 W
- Supported transponders: ISO 14443-A, ISO 14443-B, ISO 15693, NFC
- Antenna: Integrated, approx. 70 mm x 70 mm
- Interface: Ethernet 10BASE-T / 100BASE-TX, automatic MDI/MDI-X Crossover correction, TCP/IP-Protocol
- LEDs: Blue (Power and TCP/IP-Link), Green + Red (Host-controlled)
- Buzzer: Integrated
- Inputs/Outputs: 1x Relay with optional I/O Card ID CPR.I/O-A, 2x digital inputs with optional I/O Card ID CPR.I/O-A
- Reading/writing distance: Max. 7 cm
- Temperature range (Operation): -20 degree C up to +70 degree C
- Temperature range (Storage): -40 degree C up to +85 degree C
- Relative humidity: 95% (non-condensing)
- Memory: EEPROM for configuration data, 1 million write cycles
Benefits
The ID CPR50.10-E can be seamlessly integrated into existing LAN networks, thanks to its fast Ethernet interface and Power over Ethernet (PoE) capability.
The card reader supports encrypted data transfer via Ethernet, ensuring the security of information exchanged between the reader and the host system.
With its wall-mountable design and optional external relay, the ID CPR50.10-E offers flexibility in installation and can be used in both indoor and outdoor environments.
Related Products
The ID PAD74-U is a compact and powerful USB pad reader designed for contactless data exchange with HF transponders. It features a defined capture window and a read range of up to 19 cm. With support for ISO 15693 and ISO 14443 transponders, it is suitable for applications like access control, user ID card detection, and book/document tracing in libraries and offices. The reader comes with 3 LEDs for optical feedback and is USB powered, making it easy to connect to a laptop or desktop PC.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.5 kg (1.2 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic blade
- Color: Pad in black, upper part in similar RAL 9003 (white)
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power: 400 mW ±1 dB
- Supply voltage: 5V DC (via USB)
- Power consumption: max. 2.5 W
- Interfaces: USB 2.0
- Indicator, optical: 3 LEDs (green, red, blue)
- Supported transponders: ISO 15693, ISO 14443-A/B, (ISO 18000-3 MODE 1)*
- Reader modes: ISO Host Mode, Scan Mode**
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Software development kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver: Windows Server 2012 and 2016, Windows 10 and 11; 32/64 Bit
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The ID ANT800/600-DA HF Loop Antenna is a versatile and high-performance antenna designed for use with HF readers. With a read range of up to 100 cm and a transmitting power of 8 W, this antenna is capable of delivering reliable and efficient RFID communication. Its easy setup, integrated dynamic antenna tuner, and IP65 protection class make it suitable for various applications.
- Dimensions: 852 mm x 620 mm x 40 mm
- Weight: approximately 2.5 kg
- Housing: Plastic ABS
- Color: Black
- Protection class: IP65
- Operating temperature range: -25 degree C up to +55 degree C
- Storage temperature range: -25 degree C up to +60 degree C
- Relative air humidity: 5% up to 95% (not condensing)
- Operating frequency: 13.56 MHz
- Max. transmitting power: 8 W
- Permitted transmitting power:
- EU (EN 300 330): 4 W
- USA (FCC Part 15): 2 W
- Canada (RSS-210): 2 W
- Read range: up to 100 cm*
- Antenna connection: 1 x SMA plug (50 ohm)
- Antenna connection cable: RG58, 50 ohm, approximately 3.6 m
The ID MAT Manual Antenna Tuner is a versatile and reliable device designed for manual tuning and retuning of HF Long Range Antennas operating at a frequency of 13.56 MHz. It allows for easy construction of customized single antennas using different sizes and shapes of antenna conductors such as aluminium bands or copper pipes. With individually switchable capacitors, the antenna can be tuned to its environment, ensuring optimal performance. The ID MAT.S-A variant also features an electronic switch to disconnect the antenna circuit, preventing coupling effects in complex antenna arrangements.
- Dimensions (w x h x d):
- ID MAT-B: 90 mm x 45 mm x 17 mm
2. ID MAT.S-A: 90 mm x 45 mm x 19 mm - Weight: approximately 35 g
- Operating frequency: 13.56 MHz
- Antenna conductor: Double-sided solder surface with hole for screw attachment (M3)
- Transmitting power: maximum 8 W
- Reader connection: SMA HF socket RG58
- Impedance: 50 ohm
- Tuning range inductivity: 0.6 – 2.3 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +55 degree C
- Storage: -25 degree C up to +60 degree C
- Standard conformity:
- Vibration: EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g
2. Shock: EN 60068-2-27, Acceleration: 30 g
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.
The AT288N by ATID offers unparalleled efficiency in RFID data collection. With its advanced technology, this handheld reader empowers businesses to streamline their inventory management, asset tracking, and supply chain operations with precision and speed. Its ergonomic design ensures comfortable usage, while its robust build guarantees durability in various environments.
Elevate your RFID data collection capabilities with the AT288N by ATID. Engineered to excel in efficiency, this handheld reader revolutionizes inventory management, asset tracking, and supply chain operations. Its cutting-edge technology empowers businesses to capture data with unprecedented speed and accuracy, enhancing overall productivity and decision-making. Designed for user comfort and durability, the AT288N ensures seamless integration into diverse workflows, making it the ultimate solution for optimizing operational efficiency and gaining actionable insights.
- Supported protocols: UHF EPC Gen2, ISO / IEC 18000-6C, 6B, AEI (Rail)
- Connectivity: BT V2.1 + EDR / BLE V4.1
- Compatibility: Windows, Android & iOS Host
- Design: Compact & Handy design
- Drop: spec: 5m (5ft)
- IP65
- Reading Range: ~3M (According to Tag & Environment).
- Battery Life: a 3.7V 2,200mAh Lithium-Ion Battery (Rechargeable).
- Operating Temperature: -10degree C to 45degree C.
- Dimensions: 165mm x 75mm x 29mm
- Weight: 320 grams