HID – BluFi BLE – WiFi Gateways
BluFi BLE – WiFi Gateways are Bluetooth Low-Energy (BLE) to WiFi gateways that enable the centralized management of BEEKs Beacons through the cloud. They relay signals between the beacons and HID Global’s end-to-end IoT Services ecosystem, allowing for remote transfer of messages, firmware updates, sensor data, and battery status checks. BluFi devices are designed to provide reliable broadcasting even in densely populated WiFi environments. They are suitable for a range of applications, including beacon management, condition monitoring, real-time asset location, and item management.
Specification
Benefits
Bi-directional BLE to WiFi gateway for remote management. Allows for centralized management of BEEKs Beacons through the cloud.
Accurately measures distance to BLE Beacons for Real-Time Location Services (RTLS). Enables indoor position tracking of assets and position-based alerting.
Simply install at any conventional power plug. Easy and cost-efficient way to provide BLE to internet connectivity for centralized management, real-time condition monitoring, or location services.
Related Products
The ID PRHD102 Handheld Reader is a versatile dual frequency reader that supports both HF and UHF transponders. With its integrated antennas, easy handling, and multiple interface options, it is suitable for various applications such as delivery control and inventory purposes. The reader offers a maximum read range of 10 cm for HF transponders and a variable read range of 5 cm to 100 cm for UHF transponders, depending on the configured output power.
- Dimensions: 230 mm x 100 mm x 80 mm
- Weight:
- Bluetooth version: 270 g (including batteries)
- USB version: 170 g (without cable)
- Housing: Plastic ABS
- Protection class: IP30
- Operating frequency:
- HF: 13.56 MHz
- UHF: 860 MHz to 960 MHz
- Supply voltage:
- Bluetooth version: 4 Mignon Batteries2 V to5 V AA
- USB version: USB High Powered Interface
- Power consumption: max. 500 mA
- Output Power:
- HF: 200 mW
- UHF: 10 mW to 100 mW
- Interfaces:
- Bluetooth version: Bluetooth (serial port profile)
- USB version: USB (HID, 12 Mbit)
- Supported transponder types:
- HF: ISO 15693
- UHF: EPC Class1 Gen2, ISO 18000-6C
- Antenna:
- Integrated HF Antenna
- Integrated UHF Antenna
- Indicator:
- Optical: 1 LED (red / green / blue)
- Acoustic: 1 Buzzer
- Reader modes: FEIG ISO Host / FEIG Scan Mode
- Temperature range:
- Operation: 0 degree C up to +50 degree C
- Storage:-20 degree C up to +70 degree C
- Standard conformity:
- Radio license:
- HF: EN 300 330
- UHF: EN 302 208
- EMC: EN 301 489-3
- Safety & Health: EN 62368-1, EN 50364
The ID PRH101-USB HF Handheld Reader is a versatile device designed for contactless data exchange with ISO 15693 transponders. It offers variable interfaces, including USB, and has an anti-collision function. With a read range of up to 20 cm, it is suitable for various applications in retail, logistics, and industry.
- Dimensions: 230 mm x 100 mm x 80 mm
- Weight: 320 g (without batteries)
- Housing: Plastic ABS
- Color: RAL 9002 / RAL 7044
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Transmitting power: 0.5 W ± 2 dB
- Supply voltage:
- ID PRH102-B: 4 Mignon cells2-1.5 V AA
- ID PRH101-USB: USB high powered interface
- Current consumption: max. 0.5 A
- Power consumption: max. 2.5 VA
- Antenna: integrated
- Interfaces:
- ID PRH102-B: Bluetooth (Serial port profile)
- ID PRH101-USB: USB (12 Mbit)
- Address setting for interface:
- ID PRH102-B: Bluetooth MAC address
- ID PRH101-USB: Device-ID of the reader
- Indicators, optical: 1 LED (multicolored)
- Indicators, acoustic: buzzer
- Supported transponders: ISO 15693 (ISO 18000-3 MODE 1)*
- Protocol modes: ISO Host Mode, Scan Mode
- Temperature range:
- Operation: 0 degree C up to +50 degree C
- Storage:-20 degree C up to +70 degree C
- Relative air humidity: 5 % up to 95 % (not condensing)
The HyWEAR compact sR is a basic barcode wearable that combines a compact barcode scanner with a comfortable fingerless glove. It is designed to make manual material handling processes more efficient by freeing both hands to perform work. The powerful optical engine can identify both 1D and 2D barcodes, and it is installed on a flexibly adjustable handcuff, leaving the user’s fingers, hand, and arm free to move. With easy integration into existing processes through Bluetooth 5.0, this wearable device offers a high level of convenience and productivity.
- Housing: Robust ABS material
- Dimensions: 60 mm x 50 mm x 23 mm (2.36 inch x 97 inch x 0.91 inch)
- Weight: Approximately 70 g
- Color: Black (translucent)/red
- Protection class: IP54
- Image resolution: 752 x 480 Pixel
- Reading field of view: 36 x 23
- Aimer: 650 nm Laser
- Barcode decoding: Supports 1D barcodes such as EAN-8, EAN-13, UPC-A, UPC-E, Code 128, Code 39, Code 93, Interleaved 2of5, and 2D barcodes including DataMatrix, QR Code, and PDF417
- Radio functions: Bluetooth 5.0 with protocols HID and SPP
- Signal indicator: Red/green/yellow/blue status LEDs, buzzer, and vibration feedback
- Battery: 1100 mAh Lithium-Polymer, 3.7 V
- Standard range*: Supports various barcode types at different distances depending on print quality, contrast, and lighting conditions
The ID MRU102-A / -USB is a compact and versatile UHF Universal Reader designed for short to medium read ranges. It features a small form factor with an internal antenna, but can also be connected to up to three external antennas for extended read ranges of up to 4 meters. With variable interfaces (RS232, USB), it can be easily integrated into existing systems. This reader supports the Low Level Reader Protocol (LLRP) and is suitable for a wide range of applications in various industries.
- Dimensions: 145 mm x 87 mm x 27 mm
- Power supply: 12 to 24 V DC, Power over Ethernet (PoE)
- Power consumption: max. 7 W
- Operating frequencies: EU (865 MHz to 868 MHz), FCC (902 MHz to 928 MHz)
- Output power: 50 mW to 500 mW, configurable
- Antenna connection: 3 x SMA plug (50 ohm), 1x internal antenna
- Interfaces: RS232 (-A) / USB Full Speed (-USB) / Ethernet (-PoE)
- Reader modes: ISO Host Mode, Buffered Read Mode, Scan Mode (-A and -USB), Notification Mode (-PoE)
- Supported transponders: EPC Class1 Gen2, ISO 18000-6-C
- Temperature range: Operation: -25 degree C up to +55 degree C, -25 degree C up to +45 degree C (PoE); Storage: -25 degree C up to +70 degree C
- Relative humidity: 5 % up to 95 % (non-condensing)
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The ATS200 is a sophisticated RFID handheld reader designed for seamless data collection and management in diverse industries. Its ergonomic design coupled with robust performance makes it an indispensable tool for inventory management, asset tracking, and logistics operations. With its intuitive interface and high-speed data processing capabilities, the ATS200 elevates operational efficiency to new heights.
The ATS200 is a compact and lightweight device, making it easy to carry and use in a variety of environments. It also has a long battery life, allowing it to be used for extended periods of time without requiring a recharge. It can be connected to a mobile device or computer for real-time data transfer and analysis. It is also equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows.