SIVA – Ferro MoM 6024 ESD ETSI RAIN RFID On-Metal Label
The SIVA Ferro MoM HTP 6024 ETSI is a high-temperature resistant RAIN RFID on-metal UHF label designed for tracking metal assets that pass through repeated high-temperature process cycles including paint cure ovens, powder coating, heat treatment, and industrial sterilisation in European facilities operating under ETSI 865–868 MHz frequency regulations. Built on the NXP UCODE 9xm IC with 496-bit EPC, 96-bit TID, and 752-bit user memory, it delivers 4 m / 13.12 ft read range on metal under ETSI power limits and withstands short-term peak temperatures of +230°C / +446°F for 30 minutes across 3 cycles, and long-term continuous operation at +150°C / +302°F.
What distinguishes the MoM HTP 6024 ETSI from standard on-metal labels is its high-temperature resistant printable white film face, replacing standard PET with a material capable of surviving repeated thermal cycling without delaminating, discolouring, or losing adhesion to the metal surface. At 60 x 24 x 1.39 mm with high-performance adhesive and spacer labels included for print head protection, it is compatible with Zebra ZT411 On-Metal, SATO CL4NX Plus, and Printronix T6000e printers. It applies to flat and curved surfaces with a minimum bending diameter of 100 mm, with spacer labels peeled from both sides before applying the RFID label to the asset. IP68 rated at 1 m for 5 hours, it also withstands 168 hours each in salt water, motor oil, and sulfuric acid (10%) without physical or performance changes. Each reel contains 500 100%-tested labels, packaged 500 pcs per box and 4 boxes per carton, under part number RF.LM.HTP6024.E.U9xm.
Specification
Physical Characteristics
- Label Size: 60 mm x 24 mm x 1.39 mm / 2.36 in. x 0.94 in. x 0.005 in.
- Face Material: High-temperature resistant printable white film (resin ribbon recommended)
- Adhesive: High performance adhesive with excellent adhesion to all surfaces
- Minimum Bending Diameter: 100 mm
- Label Pitch: 31.75 mm / 1.25 in.
- Core Inner Diameter: 76 mm / 3 in.
- Delivery Format: 500 pcs per reel (100% performance checked); spacer labels included for print head protection and ribbon stability
- Packaging: 500 pcs per box; 4 boxes per carton
- Part Number: RF.LM.HTP6024.E.U9xm
Peeling Instructions
- First peel and remove spacer labels from both sides of the RFID label
- After removing spacer labels, peel the actual RFID label and apply it to the asset
RF Characteristics
- Air Interface Protocol: ISO 18000-6C and EPC Global Gen2v2 compliant; RAIN RFID
- Operational Frequency (ETSI): 865–868 MHz
- IC: NXP UCODE 9xm
- Memory Configuration: EPC 496 bit; TID 96 bit; USER 752 bit
- Applicable Surface Materials: Metallic surfaces
Performance
- Read Range on Metal (2W ERP): 4 m / 13.12 ft
Printer Compatibility
- Tested Printers: Zebra ZT411 On-Metal; SATO CL4NX Plus; Printronix T6000e series
- Compatible Printer Types: Industrial grade thermal transfer UHF printers
Environmental Ratings
- Operating Temperature: -35°C to +85°C / -31°F to +185°F
- Installation Temperature: +10°C to +38°C / +50°F to +100.4°F
- Peak Temperature (long term): +150°C / +302°F continuous
- Peak Temperature (short term): +230°C / +446°F for 30 minutes x 3 cycles
- IP Classification: IP68 (tested for 5 hours in 1 m deep water)
- Chemical Resistance (no physical or performance changes): 168 hours salt water (salinity 10%) exposure; 168 hours motor oil exposure; 168 hours sulfuric acid (10%, pH 2) exposure; 12 hours NaOH (10%, pH 13) exposure
- Note: Acetone should be avoided
- Storage Condition: 1 year at +20°C / 73.4°F at 50% RH (adhesive shelf life)
- Expected Lifetime: Years under normal operating conditions
Personalization Options
- Pre-encoding: Customer-specific EPC memory encoding available
- Customized Printing: Customer-specific artwork including logo, text, numbers, and barcodes in black
Regulatory Compliance
- RoHS
- RAIN RFID Alliance
- CE
- UKCA
Benefits
The high-temperature resistant face film and adhesive keep the label intact and the inlay functional through up to 3 cycles of 30 minutes at 230°C, allowing metal parts to pass through powder coating ovens, paint cure lines, and heat treatment processes without untagging and retagging between runs.
With 752 bits of writable user memory on the NXP UCODE 9xm IC, the MoM HTP 6024 ETSI stores cycle counts, batch numbers, temperature logs, and inspection records directly on the label attached to the part, making the asset self-documenting at every stage of the production process.
Unlike standard on-metal labels where the face material discolours or delaminates at elevated temperatures, the HTP 6024 ETSI uses a high-temperature resistant white film that keeps printed barcodes, text, and asset numbers readable after repeated thermal cycling — preserving both RFID and visual identification in the same label.
Related Products
The Beontag Heatwave Ultra is an RFID tag specifically designed for extreme temperature environments. With its exceptional temperature resistance and robust enclosure, this UHF RFID tag is ideal for applications where durability and reliability are crucial. The tag operates at both ETSI and FCC frequencies, allowing for global compatibility. It features the NXP UCODE 7xm+ IC, which provides excellent performance and reliability. The tag has a read range of up to 10 meters and is optimized for use on metallic surfaces. With its high-performance thermoplastic materials, the tag can withstand temperatures ranging from -35degree C to +85degree C.
It has been tested for peak temperatures of up to 235degree C and is resistant to various chemicals, including saltwater, motor oil, NaOh, sulfuric acid, and acetone. The Beontag Heatwave Ultra is IP68 rated, ensuring protection against dust and water ingress. With its long expected lifetime and multiple personalization options, this RFID tag is a reliable and versatile solution for a wide range of applications.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Carrier Dual is a versatile dual-frequency label designed for logistics and consumer interaction. This label combines RAIN RFID and NFC memory, making it suitable for a wide range of applications. With its RAIN RFID / EPCglobal Gen2v2 and NFC Forum Type 5 compatibility, it can be used with various air interface protocols. The label operates at different frequencies, with RAIN RFID at 865-928 MHz and NFC at 13.56 MHz. It features the EM Microelectronic EM4425 IC, which offers different memory configurations depending on the version. The label has a read range of up to 11m on cardboard and up to 10m on plastic for RAIN RFID, while for HF/NFC, it can be read by a mobile phone up to 3cm away or by a fixed reader up to 60cm away. The Beontag Carrier Dual is designed for non-metallic surfaces and is made of printable white PET with a high-performance acrylic adhesive.
It weighs less than 1g and comes in a delivery format of 1000 pcs/reel. With its excellent environmental resistance, including water resistance (tested for 5 hours in 1m deep water) and chemical resistance (no physical or performance changes after exposure to motor oil, salt water, sulfuric acid, NaOH, and acetone), this label is built to withstand harsh conditions. It has an operating temperature range of -35degree C to +85degree C and an expected lifetime of years in normal operating conditions. The Beontag Carrier Dual can be personalized with customer-specific encoding and visual marking, making it highly customizable. It is also printer compliant with the Zebra ZT411 printer.
- Device type: RAIN RFID / EPCglobal Gen2v2, NFC Forum Type 5
- Air interface protocol: ISO/IEC 18000-63, ISO/IEC 15693
- Operational frequency: RAIN RFID (865-928 MHz), NFC (13.56 MHz)
- IC type: EM Microelectronic EM4425
- Memory configuration: EM4425 V10 (HF: 64 bit UID, UHF: 288 bit EPC, 256 bit User, 96 bit TID, Shared user memory for HF and UHF: 1472 bits), EM4425 V12 (HF: 64 bit UID, UHF: 96 bit TID, 2048 bit configurable memory can be divided to 96 – 480 bit UHF EPC and shared user memory for HF and UHF, Web authentication uses AES-128 to create a onetime password (OTP) crypto signature)
- Read range: RAIN RFID (On cardboard up to 11m / 36 ft, On plastic up to 10m / 33 ft), HF/NFC (Mobile phone up to 3cm, Fixed reader up to 60cm)
- Applicable surface materials: Non-metallic surfaces
- Tag materials: Printable white PET, resin ribbon recommended
- Background adhesive: High performance acrylic adhesive optimized for low surface energy plastics
- Weight: <1g
- Delivery format: 1000 pcs / reel
- Pitch on reel: 38.1 mm / 5 in
- Reel core inner diameter: 76 mm / 3 in
- Tag dimensions: 36 x 70 x 0.2 mm / 41 x 2.75 x 0.01 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Ambient temperature: -35degree C to +90degree C / -31F to +194F
The Beontag Casey is a disposable high-performing label designed for supply chain and logistics applications. It utilizes UHF RFID technology with EPCglobal Gen2v2 compatibility. With an operational frequency of 865-928MHz, it offers a read range of up to 18m/60ft on both plastic and cardboard surfaces. The label features an Impinj® M730 IC chip with EPC 128bit and TID 96bit memory configuration. It is resistant to water (IP68) and various chemicals, including sulfuric acid, motor oil, saltwater, NaOH, and acetone.
The label is lightweight (0.6g) and comes in a delivery format of 2000 pcs on a reel. It has a tag dimension of 92 x 24 x 0.2mm and can withstand operating temperatures ranging from -35degree C to +85degree C. The Beontag Casey label offers reliable performance, durability, and customization options for efficient tracking and identification in diverse environments.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.
The Beontag Carrier Classic is a special washable label designed for returnable plastic containers. With its strong adhesive, this label ensures secure attachment to the containers. It operates on UHF RFID / EPCglobal Gen2v2 technology, with an operational frequency of 860-960MHz. It offers different memory configurations depending on the IC type, with read ranges of up to 10m on plastic and 4m on cardboard.
The tag is suitable for non-metallic surfaces and is resistant to water, washing, and various chemicals. With its customizable options for pre-encoding and printing, the Beontag Carrier Classic provides a reliable and versatile solution for asset identification and tracking.