SIVA – VOYAGER™ Windshield TE – Tamper-Evident UHF RFID Windshield Label
The SIVA VOYAGER™ Windshield TE is a tamper-evident UHF RFID windshield label engineered for automatic vehicle identification (AVI) applications that require secure, non-transferable labeling without advanced cryptographic features. Designed specifically for vehicle windshields, this RFID label enables fast, contactless vehicle recognition without line-of-sight, even at high speeds.
The label incorporates security cuts that ensure visible damage upon removal, preventing reuse on another vehicle. Optimized for glass mounting, the antenna design delivers consistent long-range RFID performance across global UHF frequencies (860–960 MHz). This makes the Windshield TE ideal for electronic toll collection, parking management, gated access control, fleet monitoring, and transportation infrastructure systems.
Manufactured with a printable white PET face stock, the label supports thermal transfer printing and RFID encoding in a single process, allowing vehicle information, barcodes, and IDs to be applied efficiently at scale.
Specification
RF Specification
-
Device Type: Class 1 Gen 2 Passive UHF RFID Transponder
-
Air Interface Protocol: EPCglobal Class 1 Gen2 / ISO/IEC 18000-6C
-
Operational Frequency: Global 860–960 MHz
-
IC Type: NXP UCODE G2iM
-
Memory Configuration:
-
EPC: 256 bits
-
USER Memory: 512 bits
-
TID: 96 bits with 48-bit unique serial number
-
-
Write Cycle Endurance: 10,000 cycles
-
Data Retention: Up to 20 years
-
Read Range (2W ERP):
-
ETSI & FCC (on glass): up to 10 m (32 ft)
-
-
Applicable Surface: Automotive windshield glass
Physical Specification
-
Face Stock: Printable white PET (resin ribbon recommended)
-
Label Size: 96 × 27 × 0.2 mm (3.77″ × 1.06″ × 0.01″)
-
Adhesive: High-performance acrylic adhesive optimized for glass
-
Weight: 0.80 g
-
Delivery Format: Roll form
-
Labels per Roll: 2000
-
Label Pitch: 30.16 mm (1.19″)
-
Core Inner Diameter: 76 mm (3″)
-
Roll Outer Diameter: 185 mm (7.28″)
Environmental Resistance
-
Operating Temperature: –40°C to +85°C (–40°F to +185°F)
-
Peak Temperature: +204°C (399°F)
-
Adhesive Service Temperature: –35°C to +70°C (–31°F to +158°F)
-
Recommended Application Temperature: +21°C to +38°C (+70°F to +100°F)
-
Water Resistance: IP67
-
Chemical Resistance: Resistant to chemical solvents and moisture
-
Storage Conditions: +21°C / 50% RH
Benefits
Security cuts ensure visible damage on removal, preventing unauthorized reuse.
Antenna design ensures stable RFID performance when applied to automotive windshields.
Well suited for toll roads, parking facilities, gated communities, and fleet access control.
Related Products
The Beontag Ironside Flex is a durable and versatile RAIN RFID tag designed for hard-to-tag items, offering industry-leading performance. This high-quality thermoplastic elastomer tag is optimized for a wide range of applications, including industrial and outdoor environments. Its robust design ensures reliable performance, even in extreme temperatures and harsh chemical exposures. With a read range of up to 20 meters, the Ironside Flex is ideal for assets made from various materials, including metal, making it an excellent choice for challenging environments. The tag can be attached using plastic cable ties or metallic wires.
The Beontag Heatwave Tough RFID tag is a high-performance solution designed for use on metallic surfaces. With its high temperature resistance and excellent performance, this UHF RFID tag is perfect for applications in extreme environments. The tag operates at frequencies of 865-869 MHz (ETSI) and 902-928 MHz (FCC), making it compatible with a wide range of systems. The NXP UCODE 7xm IC provides reliable and secure data storage, with a memory configuration of EPC 448 bit, user 2048 bit, and TID 96 bit. The tag’s unique number is encoded in the EPC memory, ensuring accurate and efficient tracking. With a read range of up to 7 meters on metal and 2 meters on plastic, this tag offers exceptional performance. The Beontag Heatwave Tough is made from a special epoxy-based engineering composite, designed to withstand extreme temperatures.
It has an IP68 rating, ensuring protection against dust and water ingress. The tag is also chemically resistant, with no physical or performance changes observed after exposure to salt water, motor oil, acetone, NaOH, and sulfuric acid. With a peak temperature endurance of 250degree C for 50 minutes, this tag is suitable for use in demanding industrial environments. The Beontag Heatwave Tough offers personalization options such as pre-encoding and laser engraving, allowing for customization to meet specific requirements. Installation is flexible, with options for adhesive fixings including high-performance acrylic foam adhesive, polyurethane adhesives, epoxies, and silicone sealants. This versatile RFID tag is the ideal solution for asset tracking and management in industries such as manufacturing, automotive, and oil and gas.
The Beontag Heatwave Flag Printable is a printable RAIN RFID tag specifically designed to withstand the temperature resistance of automotive paint shop cycle processes. This tag operates on the RAIN RFID / EPCglobal Gen2v2 standard and has a global operational frequency of 865-928 MHz. With its Impinj M780 IC, it offers a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit. The tag’s EPC memory content includes a unique number encoded for easy identification. It has an impressive read range of up to 19m/62ft in ETSI environments and up to 15m/50ft in FCC environments. The tag is made of a special film for high temperatures and is attached mechanically without adhesive. It weighs only 1g and comes in a delivery format of 1500 pcs labels on one reel.
The dimensions of the tag are 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in. With an operating temperature range of -35degree C to +85degree C / -31F to +185F, the Beontag Heatwave Flag Printable can withstand extreme conditions. It has an IP68 classification, making it resistant to dust and water. The tag is also highly resistant to bending, withstanding a 50mm radius even in high temperatures. It has been tested for chemical resistance and shows no physical or performance changes after exposure to motor oil, saltwater, sulfuric acid, NaOH, and acetone. The Beontag Heatwave Flag Printable offers personalization options such as pre-encoding and printing of customer-specific content. It can be easily installed using screws or pop rivets through dia.5mm holes. The tag’s polarization is along its longest dimension, which should be considered when using linear reader antennas. Overall, the Beontag Heatwave Flag Printable is a reliable and durable RFID tag that is ideal for automotive paint shop cycle processes.
- Device type: RAIN RFID / EPCglobal Gen2v2
- Operational frequency: Global 865-928 MHz
- IC options and memory configurations: Impinj M780, EPC 496 bit, User 128 bit, TID 96 bit
- EPC memory content: Unique number encoded
- Read range (2W ERP):
- ETSI: Up to 19 m / 62 ft
- FCC: Up to 15m / 50 ft
- Tag materials: Special film for high temperatures, no adhesive by default, attached mechanically
- Weight: 1 g
- Delivery format: On reel, 1500 pcs labels on one reel
- Dimensions: 76 x 55.2 x 0.32 mm / 3 x 2.17 x 0.013 in
- Operating temperature: -35degree C to +85degree C / -31F to +185F
- Peak temperature:
- 1 hour: +220degree C / +428F
- 10 min: +260degree C / +500F
- IP classification: IP68
- Bending resistance: Withstands 50mm radius also in high temperatures
- Chemical resistance: No physical or performance changes after exposure to motor oil, saltwater (salinity 10%), sulfuric acid (10%, pH 2), NaOH (10%, pH 13), and acetone
- Personalization options: Pre-encoding, visual marking (printing of customer-specific content)
- Installation: Can be attached with screws or pop rivets through dia.5mm holes, polarization along longest dimension
The Beontag eKanban SLC is a single label designed for Small Load Carriers (SLC) that is compliant with VDA recommendations 4994 and 550. This UHF RFID label operates on the global frequency range of 860-928MHz and utilizes the Impinj Monza 4E IC. With a memory configuration of EPC 496 bit, User 128 bit, and TID 96 bit, this label offers a read range of up to 6 meters on plastic surfaces.
The label is made of thermal transfer printable paper with a yellow face color, and it is delivered on a reel with 600 pcs/reel. It is designed for short-term use and can withstand operating temperatures ranging from -20degree C to +70degree C. The Beontag eKanban SLC offers customer-specific encoding options and can be personalized with variable data printing.
- Device type: UHF RFID / EPCglobal Gen2v2
- Operational frequency: Global 860-928MHz
- IC type: Impinj Monza 4E
- Memory configuration: EPC 496 bit, User 128 bit, TID 96 bit
- Read range: Up to 6 meters on plastic surfaces
- Label materials: Thermal transfer printable paper
- Label dimensions: 208 mm x 80 mm x 0.2 mm / 8.19inchx 3.15inchx 0.01inch
- Delivery format: On reel, 600 pcs/reel
- Reel core inner diameter: 76.2 mm / 3inch
- Operating temperature: -20degree C to +70degree C / -4F to 158F
- Peak operating temperature: +85degree C / 185F for 6 hours
- Storage condition: 1 year in +20degree C / 50% RH (shelf life for adhesive)
- Expected lifetime: Meant for short-term use, can last for years in normal operating conditions
- Personalization options: Pre-encoding, customer-specific visual printing
The Beontag Crosswave Neo is an RFID label designed for reliable logistics with a 360-degree read angle, combined with the performance of the latest IC generation. This label is ideal for use in various industries, including logistics, supply chain management, and inventory tracking. With its RAIN RFID / EPCglobal Gen2v2 device type and global operational frequency of 865-928MHz, the Beontag Crosswave Neo offers exceptional read range and accuracy.
Its unique random 96-bit EPC in every label ensures secure and reliable identification. The label is compatible with non-metallic surfaces and provides constant reading performance in all orientations, even when using a linear reader antenna. With its environmental resistance and short-term use design, the Beontag Crosswave Neo is a reliable solution for efficient and accurate logistics management.
The Beontag Carrier Tough Slim is a durable tag solution designed for reliable tracking of plastic containers and returnable transit items. It utilizes UHF RFID technology and operates at a global frequency range of 865-928 MHz. With its scratch and bending-resistant engineering plastic encapsulation, this tag is built to withstand tough environments. It offers excellent resistance to water, industrial washing processes, and exposure to various chemicals. The tag has a read range of up to 12 meters on plastic surfaces and is suitable for use on non-metallic surfaces.
With its compact dimensions of 122 x 18 x 2 mm, it is lightweight and easy to install. The Beontag Carrier Tough Slim can be personalized with customer-specific encoding and customized printing options.