IDTronic – ID INFO 4000 Smart Access Control Terminal
The ID INFO 4000 is a compact and intelligent terminal designed for secure access control in buildings, institutions, and turnstile systems. With a vibrant 3.33” IPS HD touchscreen, Bluetooth 5.1, QR code/barcode scanner, and MIFARE RFID reader, it provides fast, flexible identification options for modern facilities. Its robust polycarbonate housing supports wall or desk installation with 86-box or non-86-box compatibility. The terminal’s multi-interface support (Ethernet, RS485) and NFC peer-to-peer functionality make it a powerful and adaptable device for any secure access application.
Specification
Electrical & Interface:
-
Operating Voltage: DC 9V – 15V
-
Power Consumption: 3.52 W
-
Current Draw: 293 mA (typical @12V)
-
Relay Output: DC 30V / 1A
-
Interfaces: RS485, Ethernet
-
Access Control I/O: Exit switch input, relay output
-
Bluetooth: BLE 5.1 (up to 20 m in open space)
Display & Scanning:
-
Display Size: 3.33” IPS HD
-
Screen Resolution: 320 × 480
-
Max Image Resolution: 800 × 600
-
Sensor: 480,000-pixel CMOS
-
Touchscreen: Capacitive
-
Scan Speed: ~100 ms (continuous read supported)
-
Read Distance: 22.5 – 129 mm
-
Audio Feedback: <71 dB @ 1 m
Barcode & QR Support:
-
1D Barcodes: Code128, UPC, Code 39, Code11, Codabar, MSI, Interleaved 2 of 5
-
2D Codes: QR, PDF417, Aztec, Micro QR, MaxiCode
RFID/NFC:
-
Frequency: 13.56 MHz
-
Standards: ISO 14443 A/B, ISO 18000-3M3
-
Supported Tags:
-
ISO 14443 A: MIFARE Classic/Ultralight/Plus/DESFire, NTAG, Smart MX, Pro X
-
ISO 14443 B: SRI4K, SRIX4K, AT88RF020, SR176
-
ISO 18000-3M3: I-Code ILT-M
-
-
NFC Peer-to-Peer: Supported
Mechanical & Environmental:
-
Dimensions: 90 × 90.3 × 27.4 mm
-
Window Material: Tempered glass
-
Housing: Polycarbonate
-
Mounting: 86-box and non-86-box
-
Operating Temp: –20 °C to +60 °C
-
Storage Temp: –40 °C to +80 °C
-
Humidity: 5% to 95%
-
SDK Support: Linux OS
Benefits
Combines RFID, barcode scanning, NFC, and Bluetooth in one compact unit—ideal for secure access through turnstiles, doors, and kiosks.
Fits into both 86-box and standard surfaces, enabling simple deployment in space-constrained areas with a premium glass and polycarbonate build.
Engineered for commercial and industrial use with fast scan speed, durable materials, and broad operating temperature for reliable round-the-clock access control.
Related Products
The ID ANT.U75/50 is a UHF antenna designed for short read ranges. It operates at frequencies of 865-868 MHz and 902-928 MHz, making it suitable for use with the UHF Reader module ID MU02-02 and the Mid Range Readers ID MR(M)U102. With its compact design and low installation depth, it is an ideal choice for applications requiring a compact UHF antenna.
- Dimensions: 75 mm x 50 mm x 3 mm
- Connection: U.FL connector
- Operating frequencies: 865-868 MHz (EU), 902-928 MHz (FCC)
- Impedance: 50 ohm
- Maximum input power: 300 mW
- Read range:
- Far Field Tags: up to 20 cm
- Near Field Tags: up to 4 cm
- Gain: -20 dBi (linear)
- SWR:
- EU: <5:1
- FCC: < 2.0:1
The ID ANT240/180-A is a flat and compact pad antenna designed for contactless data exchange with RF RFID transponders. With a read range of up to 42 cm, it is suitable for use in enclosed spaces such as offices, libraries, and file tracking applications. The antenna features a sleek design and can be connected directly to a reader with an included coaxial cable.
- Dimensions: 240 mm x 180 mm x 13 mm (9.45 inch x 7.09 inch x 0.51 inch)
- Weight: approx. 0.36 kg (0.8 lbs)
- Housing: Insensitive surface with upper part made of plastic ABS and lower part made of plastic plate
- Colour: Black pad and similar RAL 9003 (white) upper part
- Protection class: IP30
- Operating frequency: 13.56 MHz
- Max. transmitting power:5 W
- Antenna connection: RG174 coaxial cable with SMA connector (50 ohm); approx. 2.2m long
- Indicator, optical: 1 LED (blue; switchable via DC voltage at the antenna output of the reader)
- Temperature range: Operation:-25degree C up to +55degree C (-13F up to 131F), Storage:-25degree C up to +70degree C (-13F up to 158F)
- Relative air humidity: 5% up to 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364
The Dynamic Antenna Tuner ID DAT is a versatile device designed for automatic tuning and retuning of RFID Long Range Antennas operating at 13.56 MHz. With its easy “Plug & Play” functionality, it eliminates the need for additional tuning devices. The tuner can be driven via HF connection and allows for parameters or calibration status to be sent to the host. It also features an electronic switch to disconnect the antenna circuit when necessary.
- Dimensions: 118 mm x 90 mm x 19 mm
- Weight: approximately 100 g
- Operating frequency: 13.56 MHz
- Supply voltage: 7 – 12 V DC
- Current consumption: maximum 150 mA (DC)
- Transmitting power: maximum 10 W
- Antenna switch: electronic switch (mind maximum antenna power!)
- Antenna connection: cable terminals (d = 2 – 9 mm)
- Reader connection: SMA socket (50 ohm)
- Triggering reader: via RF connection
- Signal indicator: 1 x “Run”-LED (green), 2 x “Protocol”-LED (red)
- Outputs: 3 x open collector: 5 V DC / maximum 15 mA
- Carrier frequency: 13.56 MHz
- Impedance: 50 ohm
- Tuning range inductivity: 0.7 – 2.5 microH
- Quality: 10 – 50
- Temperature range:
- Operation: -25 degree C up to +75 degree C
- Storage: -40 degree C up to +85 degree C
The 4 Channel Antenna Multiplexer (ID CPR.ANT.MUX-M4) is a device that allows the connection of up to 4 external antennas to the reader module ID CPR74. With this multiplexer, it is possible to create up to 5 reading areas by utilizing the internal antenna of the ID CPR74. The control of each active antenna can be easily configured through the CPR74 or via two digital inputs with external control electronics. The multiplexer features non-wearing electronic switching of the outputs and has a high switching speed of less than 1 ms.
- Weight: 12 g
- MTBF (Mean Time Between Failures): 500,000 hours
- Power supply: +5 V DC ± 5%
- Current consumption: Less than 40 mA
- Digital inputs: Low level: 0 -0 V, High level: 3.8 V – VCC, Pull-Down: 10 kohm
- LED: 4 yellow LEDs for indicating active antennas
- Operating frequency: 13.56 MHz
- RF power: Maximum 500 mW
- Reader connection: U.FL connector
- Antenna connection: 4 x U.FL connectors for external antennas
- Temperature range: Operation: -25 degree C up to +70 degree C, Storage: -40degree C up to +85 degree C
- Relative air humidity: Maximum 95% (non-condensing)
- Standard conformity: EMC: EN 301 489, Safety & Health: EN 62368-1, EN 50364, Environment: WEEE-2002/96/EC, RoHS-2011/65/EC
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.