Zebra – RFD40-M Premium Plus Sled | Faster. Smarter. Future-proof.
The Zebra RFD40-M Premium Plus Sled is a high-performance RFID sled engineered to help frontline workers move faster and operate more efficiently. With an industry-best read rate of 1,300+ tags per second — up to 30% faster than the nearest competitor — and a maximum read range of 80+ ft. (24+ m), it sets a new standard for cycle counting, inventory management, and item finding across retail, healthcare, and hospitality environments.
The RFD40-M connects to current and future Zebra mobile computers via eConnex snap-and-go technology, or wirelessly via Bluetooth 5.3 and NFC tap-to-pair. Industry-first Wi-Fi 6 enables seamless over-the-air device management. An integrated SE4100 barcode imager, tri-function programmable trigger, 7,000 mAh battery, and IP54 sealing round out a device built for all-day, real-world use. Adaptors are also available for Android, iOS, and third-party smartphones, making the RFD40-M a truly versatile RFID solution.
Specification
Physical Characteristics
- Dimensions: 6.14 in. H x 3.31 in. W x 6.89 in. L (15.6 x 8.4 x 17.5 cm)
- Weight: ~19.6 oz. (~556 g)
- Power: Quick-release PowerPrecision+ Li-Ion 7,000 mAh battery
- Notifications: Decode LEDs, battery status LED, beeper
- User Input: Tri-function user-programmable trigger
RFID Performance
- Standards: EPC Class 1 Gen2; EPC Gen2 V2
- RFID Engine: Zebra Proprietary Radio Technology
- Read Rate: 1,300+ tags/sec
- Maximum Read Range: 80 ft. (24 m)
- Frequency (US): 902–928 MHz; 4–34 dBm (EIRP)
- Frequency (EU): 865–868 MHz; 1.85–31.85 dBm (ERP)
- Frequency (Japan): 916–921 MHz with LBT; 4–34 dBm (EIRP)
Integrated Barcode Scanner (SE4100 Imager)
- Sensor Resolution: 1280 x 960 pixels, rolling shutter
- Field of View: 44.5° horizontal, 33.5° vertical
- Skew / Pitch / Roll Tolerance: ±60° / ±60° / 360°
- Focal Distance: 6 in. (15.24 cm) from front of engine
- Aiming: Green LED; Illumination: Warm white LED
Wireless Connectivity
- WLAN: Wi-Fi 6 (802.11 ax/ac/a/b/g/n), 2×2 MU-MIMO, IPv4
- Data Rates: Up to 1.2 Gbps (5 GHz) / 458 Mbps (2.4 GHz)
- Bluetooth: v5.3; profiles: SPP, HID, Apple iAP2/MFi
- NFC: Tap-to-pair supported
Host Connectivity
- eConnex (electronic 8-pin connection)
- Bluetooth 5.3
- USB-C cable and USB cable cup
- Compatible hosts: Zebra mobile computers and tablets, third-party smartphones, Windows-based PCs
Remote Management
- Wi-Fi 6, Ethernet cradles, via attached host device
- 123RFID Desktop via USB, cable cup, or Bluetooth
- Batch mode: stores up to 40,000 RFID tags offline
Ruggedness & Environment
- Drop: Multiple 5 ft. (1.5 m) drops to concrete
- Tumble: 500 cycles (1,000 hits) at 1.6 ft. (0.5 m)
- Sealing: IP54
- Operating Temp: 14°F to 122°F (-10°C to 50°C)
- Storage Temp: -40°F to 158°F (-40°C to 70°C)
- Humidity: 5–85% non-condensing
- ESD: ±15 kV air / ±8 kV direct / ±8 kV indirect
Accessories
- Cable Cup, USB-C Cable, USB Wall Brick
- 1-Slot Charging Cradle, 1-Slot Charging and USB Cradle
- Multi-Slot Charging Cradle, Multi-Slot Charging and Ethernet Cradle
- 4-Slot Battery Toaster
- eConnex Adaptors, Battery Locking Foot, Belt Holster
Benefits
At 1,300+ tags per second and an 80+ ft. read range, the RFD40-M outpaces the competition by up to 30%. The tri-function trigger gives instant access to RFID reading, barcode scanning, and a programmable third function — all without breaking workflow.
eConnex snap-and-go pairing connects instantly to current and future Zebra mobile computers, including WWAN variants. Wi-Fi 6, Bluetooth 5.3, and NFC tap-to-pair ensure the sled stays compatible as your device ecosystem evolves — no IT retrofitting required.
IP54 sealing, 5 ft. drop protection, and a 7,000 mAh quick-release battery keep the RFD40-M running shift after shift. Batch mode stores up to 40,000 tags offline, and flexible cradle options support both charging and full device management from a single docking solution.
Related Products
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The ID RWA40.30-USB is a versatile desktop reader designed for contactless data exchange with common 125 kHz transponders. It is suitable for various office, administration, and industrial applications. With its USB interface, it allows for easy power supply and data exchange with a computer or other equipment. The reader has its own local intelligence, enabling both online and offline operation.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 125 kHz
- MTBF: 500,000 h
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Optical indicators: 2 LED (Green: Power and online/offline Blue: Transponder communication)
- Operation mode: Polling-Mode
- Supported transponders: 125 kHz Read Only transponders, 125 kHz Read / Write transponders
- USB CDC device driver: Windows 2000 SP4, Windows Server 2003, Windows XP SP2, Vista 32 Bit
- EEPROM: 512 Byte (1 x 106 write cycles)
- FLASH: 128 Byte (firmware update in application possible)
- Temperature range: Operation: -20 degree C up to +60 degree C, Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The UHF Mid-Range Antenna ID ANT.U150/150 by FEIG ELECTRONIC GmbH is a robust, compact, and aesthetically pleasing antenna designed for a variety of demanding environments. With a circular polarization that ensures optimal performance and reliable read ranges up to 4 meters, this antenna is ideal for logistics, industrial applications, railway systems, waste management, and retail inventory tracking. Its IP68 protection class makes it suitable for permanent outdoor use, even in harsh industrial settings. The ID ANT.U150/150 features a VESA100 standard mounting for easy installation and is compatible with multiple FEIG UHF readers, making it a versatile solution for efficient asset tracking and inventory management.
- Dimensions: 151 mm x 150 mm x 14.5 mm
- Weight: 230 g
- Housing: ABS, UV resistant, and fire-retardant
- Protection Class: IP68
- Gain: Approximately 5 dBic
- 3 dB Beam Width: 105 x 105
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
EU Variant: 865 Mz – 868 MHz
FCC Variant: 902 MHz – 928 MHz
The ID ANT340 / 240 HF Pad Antenna is an elegantly designed, high-performance antenna for contactless data exchange with HF transponders. Ideal for office and library applications, it provides up to a 30 cm read range for seamless file and document tracking. The antenna is built with a sleek, flat profile, making it a versatile choice for desktop use. It comes equipped with a 230 cm coaxial cable and SMA plug, ensuring easy integration with compatible readers. Available in both plastic housing and module form, this antenna offers flexibility for various applications in secure, contactless communication systems.
- Dimensions: 337 mm x 237 mm x 8 mm
- Weight: 530 g
- Material: Plastic ABS housing
- Color: Grey-white
- Protection Class: IP40
- Operating Frequency: 13.56 MHz
- Maximum Transmitting Power:2 W
- Antenna Connection: 1 x SMA plug (50 ohm)
- Cable Length: 230 cm RG58 coaxial cable
- Operating Temperature: 0degree C to +55degree C
- Storage Temperature: -25degree C to +85degree C
- Humidity Range: 5% to 95% (non-condensing)
- Compliance: EMC EN 301 489, Safety EN 62368-1, EN 50364
The ID ANT.MUX.M4 is a 4 channel Multiplexer Module designed for switching between RFID antennas operating at a frequency of 13.56 MHz. It allows multiple single antennas and gate solutions to be operated with just one reader. The Multiplexer is controlled via the antenna cable connected to the reader, making installation easy and hassle-free. With non-wearing electronic switches and high switching speed, this Multiplexer ensures efficient and reliable communication between the reader and antennas.
- Dimensions: 137 mm x 77 mm x 15 mm
- Weight: approximately 80 g
- Operating frequency: 13.56 MHz
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 1x input (SMA jack), 4x output (SMA jack)
- RF switches: electronic switches (non-wearing) with switching speed < 1 ms
- Triggering reader: communication via RF input 1
- Signal indicator: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C to +65 degree C (-13 F to +149 F), Storage: -40 degree C to +80 degree C (-40 F to +176 F)
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.