HID – Janam XR2 UHF RFID Reader | Android 13 Handheld RFID Gun Reading 1,300+ Tags Per Second at 60 Feet
The Janam XR2 is an Android 13 handheld UHF RFID reader powered by the Impinj E710 chip, reading more than 1,300 EPC Class 1 Gen 2 tags per second at a normal read range of 60+ ft. / 18.2+ m. Designed for high-volume retail, logistics, manufacturing, warehouse operations, and healthcare, it combines RFID with a Honeywell N5703 1D/2D imager, 4G LTE Dual-SIM with optional JanamConnect multi-carrier intelligent SIM, Wi-Fi 6 ready, Bluetooth 5.1, GPS, and a 9000 mAh battery in an IP67-sealed device weighing less than 24 oz. The 5 dBi circular antenna supports both tag reading and tag writing, and the Corning Gorilla Glass touch panel accepts finger, gloved finger, and stylus input with water droplet rejection.
Specification
Physical Characteristics
- Dimensions: 5.64 in. x 6.65 in. x 3.56 in. / 143.3 mm x 169 mm x 90.5 mm
- Weight: 26.2 oz. / 678 g
- Display: 5.7 in. (720 x 1440); color display with LED backlight
- Touch Panel: Corning Gorilla Glass; dual input mode supporting finger, gloved finger, and stylus; water droplet rejection; anti-fingerprint and anti-smudge coating
- Cards: User-accessible microSD up to 256 GB; Nano-SIM x2
- Audio: Built-in speaker (1.5W) and microphone with noise cancellation
- Alerts: LED lights; audio
- Sensors: Accelerometer with gyroscope; proximity sensor; light sensor
Technical
- Operating System: Android 13 with Google Mobile Services (upgradable to Android 15)
- Processor: Qualcomm Snapdragon 662 octa-core 2.45 GHz
- Memory: 4 GB RAM / 64 GB storage
- Battery: 9000 mAh 3.85V rechargeable Li-ion battery (largest capacity in its class)
RFID Performance
- Standards Supported: EPC Class 1 Gen2; ISO-18000-63
- RFID Engine: Impinj E710
- Fastest Read Rate: 1,300+ tags per second
- Normal Read Range: 60+ ft. / 18.2+ m
- Frequency Range: 865–928 MHz; 902–928 MHz
- Antenna: High-sensitivity circular antenna, 5 dBi
- Tag Writing: Supported
- Tag Locationing: Supported
Data Capture
- Imager: Honeywell N5703 1D/2D imager
- Cameras: 5MP front-facing and 13MP top-facing cameras with flash
Connectivity
- WWAN: Dual-SIM, Dual-Standby; TD-LTE (B34/B38/B39/B40/B41); FDD-LTE (B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B20/B28A/B28B); WCDMA (B1/B2/B4/B5/B8); TD-SCDMA (B34/B39); CDMA2000 1x EV-DO Rev. A BC0 (800 MHz); CDMA1x; GSM/EDGE/GPRS (850/900/1800/1900)
- Optional: JanamConnect multi-carrier intelligent SIM — automatic connection to strongest signal from AT&T, Verizon, T-Mobile, and 600+ networks worldwide
- WLAN: 2.4G/5G Wi-Fi; IEEE 802.11 a/b/g/n/ac/d/e/h/i/k/r/v/w; 802.11ax ready
- Operating Channels: Channels 1–13, 34–140, 149–165 (depending on regulatory region)
- WPAN: Bluetooth Class 2, v5.1 with BR/EDR and BLE support
- GPS: GPS, A-GPS, BeiDou, GLONASS, Galileo
- Fast Roam: PMKID caching; Cisco CCKM; 802.11r; OKC
- Security: WEP (40 or 104 bit); WPA/WPA2 Personal (TKIP and AES); WPA3 Personal (SAE); WPA/WPA2 Enterprise (TKIP and AES); WPA3 Enterprise 192-bit mode (GCMP-256) — EAP-TLS; Enhanced Open (OWE)
Environmental Ratings
- Operating Temperature: -4°F to 140°F / -20°C to 60°C
- Storage Temperature: -40°F to 158°F / -40°C to 70°C
- Humidity: 5% to 95% RH non-condensing
- Drop: Multiple 4 ft. / 1.2 m drops to concrete
- Sealing: IP67
- ESD: +/- 15 kV air; +/- 8 kV contact; +/- 8 kV indirect contact discharge
Accessories
- Single-slot charging cradle
Regulatory Compliance
- EMI/EMC: FCC Part 15 Subpart B Class B; ICES 003 Class B; EN 301 489-1; EN 301 489-3; EN 55024; EN 55032 Class B
- Electrical Safety: EN 62368-1; CAN/CSA C22.2 No. 60950-1; IEC 60950-1; EN 60950-1
- RF Exposure (EU): EN 50364; EN 62369-1; EN 50566; EN 62311
- RF Exposure (USA): FCC Part 2; 1093 OET Bulletin 65 Supplement C
- RF Exposure (Canada): RSS-102
- Environmental: RoHS Directive 2011/65/EU; Amendment 2015/863; REACH SVHC 1907/2006
- Warranty: 2 years (standard)
- RAIN RFID Alliance certified
- Impinj Connected
Benefits
The Impinj E710 engine reads over 1,300 EPC Gen 2 tags per second at a range exceeding 60 feet, letting workers count an entire warehouse shelf or retail rack in a single pass rather than scanning item by item. Cycle count time drops from hours to minutes on large inventory floors.
The largest battery capacity in its device class delivers a full extended shift on a single charge without a mid-shift swap. Combined with IP67 sealing and 4 ft. drop protection, the XR2 stays in workers’ hands from start of shift to end without interruption or babysitting.
Dual-SIM Dual-Standby 4G LTE combined with the optional JanamConnect intelligent SIM card automatically selects the strongest available carrier signal from AT&T, Verizon, T-Mobile, and 600+ networks globally — keeping mobile workers in remote warehouses, loading docks, and field locations connected to business systems without manual carrier switching.
Related Products
The ID CPR40.30-A is a versatile desktop reader designed for contactless data exchange with common transponders according to ISO14443-A and ISO14443-B, as well as NFC devices according to ISO 18092. It is ideal for various desktop applications such as eTicketing, eDocument, loyalty cards, and public transport. With its “SoftCrypto” and “SAMCrypto high level” functions, it provides a comfortable and fast interface for accessing encrypted data of mifare DESFire EV1, mifare PLUS, and mifare Ultralight C.
- Dimensions (w x h x d): 144 mm x 84 mm x 18 mm
- Weight: approx. 260 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- RFID Interface: ISO 14443-A/-B (106 – 848 kBit/s)
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW
- MTBF: 500,000 h
- Supply voltage: 5 V DC ± 10 % ripple
- Current consumption: max. 140 mA
- Antenna: integrated
- Interface: RS232 (4,800 up to 230,400 Baud)
- Indicators, optical: 2 LED (green / blue)
- Contact interface: ISO 7816
- Operation modes: Polling-Mode, Scan-Mode
- Supported transponders: mifare classic, mifare UltraLight, mifare DESFire, mifare PLUS, mifare UltraLight C, my-d move, JewelTM, FeliCa, NTAG, mifare/NTAG Ev2 Crypto, NFC Devices in Card Emulation Mode (Tag Type 1 … 4)
- Software Development Kits: Windows (C++, .NET, Java), LINUX (C++, Java), Raspberry Pi
- USB driver, PC/SC driver: Windows Server 2012 and 2016, Windows 7, 8 and 10; 32 / 64 Bit
- Temperature range:
- Operation:-20 degree C up to +60 degree C
2. Storage:-40degree C up to +85 degree C - Relative air humidity: max. 95% (non-condensing)
- Standard conformity:
- Radio license: Europe – EN 300 330
2. EMC: EN 301 489
3. Safety & Health: EN 60950, EN 50364
4. Environment: RoHS-2002/95/EC, WEEE-2002/96/EC - Order descriptions: ID CPR40.30-A – Desktop Reader RS232
- Scope of delivery: ID CPR40.30-A, 2.5 m cable (permanently mounted) for power supply (5.5 mm coaxial connector) and interface (9-pin D-Sub connector), Installation manual
The ID CPR30+ Desktop Reader is a proximity reader designed for contactless data exchange with ISO 15693 and ISO 14443-A/-B compliant transponders. It is compact, reliable, and compatible with NFC applications. With its NFC High Power Mode, it offers enhanced reading ranges and improved reliability, making it ideal for use in offices, workstations, or at the point of sale. The reader is form, fit, and function compatible with ID CPR30 and is qualified according to Zhaga Book 24, commonly used in the lighting industry. It is powered and connected to a computer or other equipment via the USB interface.
- Dimensions: 144 mm x 84 mm x 18 mm
- Weight: approximately 105 g
- Housing: Plastic (ASA) / Acrylic glass
- Color: white / black
- Protection class: IP42
- Operating frequency: 13.56 MHz
- Transmitting power: 100 mW / 300 mW
- Supply voltage: 5 V, USB Bus powered
- Current consumption: max. 150 mA / 220 mA
- Antenna: integrated
- Interface: USB Full-Speed (12 MBit/s)
- Indicators, optical: 2 LED (green / orange)
- Indicators, acoustic: Buzzer, integrated
- Supported transponders: ISO 15693, ISO 14443-A*/, ISO 14443-B
- Operation mode: Polling-Mode
- USB driver: Windows Server 2016 and 2019, Windows 10 and 11; 32 / 64 Bit
- Temperature range:
- Operation: -20 degree C up to +60 degree C
- Storage: -40 degree C up to +85 degree C
- Relative air humidity: max. 95% (non-condensing)
The UHF Mid-Range Antenna ID ANT.U150/150 by FEIG ELECTRONIC GmbH is a robust, compact, and aesthetically pleasing antenna designed for a variety of demanding environments. With a circular polarization that ensures optimal performance and reliable read ranges up to 4 meters, this antenna is ideal for logistics, industrial applications, railway systems, waste management, and retail inventory tracking. Its IP68 protection class makes it suitable for permanent outdoor use, even in harsh industrial settings. The ID ANT.U150/150 features a VESA100 standard mounting for easy installation and is compatible with multiple FEIG UHF readers, making it a versatile solution for efficient asset tracking and inventory management.
- Dimensions: 151 mm x 150 mm x 14.5 mm
- Weight: 230 g
- Housing: ABS, UV resistant, and fire-retardant
- Protection Class: IP68
- Gain: Approximately 5 dBic
- 3 dB Beam Width: 105 x 105
- Polarization: Circular (RHCP)
- Antenna Connector: SMA (female)
- Operating Frequencies:
EU Variant: 865 Mz – 868 MHz
FCC Variant: 902 MHz – 928 MHz
The UHF Antenna Multiplexer from FEIG is a versatile solution for connecting and controlling multiple antennas with a single reader. It allows for easy installation and communication via the antenna cable, eliminating the need for additional control lines. With a high switching speed and the ability to cascade up to three levels, this multiplexer is ideal for applications that require many small reading points in a confined space, such as smart shelves and logistics systems.
- Dimensions: 85 mm x 145 mm x 27 mm
- Weight: 170 g
- Housing: Plastic ABS
- Color: Black, transparent
- Protection class: IP30
- Operating frequency: 860 MHz to 960 MHz
- Supply voltage: 12 V DC to 24 V DC ±10%
- Power consumption: Max. 200 mA
- Insertion loss: Max. 2.2 dB
- Isolation: Min. 28 dB
- Input power: Max. 4 W
- RF-Connector: 1x Reader input (SMA-Female), 8x Antenna output (SMA-Female)
- DC-Coupling: -7 V / 150 mA, -12 V DC to 24 V DC / 150 mA
- Indicator, optical: 4 LEDs (Diagnostic, operating state), 8 LEDs (Indication of active antenna output)
- Temperature range: Operation: -25 degree C up to +55 degree C, Storage: -25 degree C up to +85 degree C
- Standard conformity: EMC (EN 301 489-3), Safety & Health (EN 62368-1, EN 50364)
The ID ANT.MUX/ ID ANT.MUX.M8is an HF 8 channel Multiplexer that allows for the operation of up to 8 antennas with just one reader. It facilitates communication between the reader and the multiplexer via an antenna cable. The outputs of the multiplexer can be controlled by the reader, a host, or digital inputs. It features non-wearing electronic switching of the outputs and has a high switching rate of less than 1 ms. The multiplexer is available in a housing or as a module, with options for 8 channel or 4 channel configurations.
- Dimensions (w x h x d): 182 x 110 x 90 mm
- Weight: approximately 550 g
- Housing: Plastic ASA, with screwed plexiglas lid
- Protection class: IP65
- Operating frequency: 13.56 MHz
- Grommet: 12 x screwed cable gland M16 x 5
- Supply voltage: 12 – 24 V DC
- Power consumption: maximum 4.0 W
- Attenuation per channel: maximum 0.5 dB
- Max. perm. switching power: 8 W
- RF connections: 2x input (SMA jack), 8x output (SMA jack)
- RF switch: electronic switch with switching speed less than 1 ms
- Triggering: Reader via RF input 1, external pulse generator via digital input
- Digital inputs: 1x optocoupler (max. 24 V DC / 20 mA)
- Signal indicators: 1 x LED per channel, 3 x LED (Run / HF / Communication)
- Temperature range: Operation: -25 degree C up to +65 degree C, Storage: -40 degree C up to +80 degree C
- Standard conformity: EMC (EN 61000-6-3, EN 61000-6-2), Vibration (EN 60068-2-6, 10 Hz to 150 Hz: 0.075 mm / 1 g), Shock (EN 60068-2-27, Acceleration: 30 g)
AT907 is a versatile and reliable device that is developed in combination with the needs of IOT application scenarios. It compact in size and has a long battery life, and high-performance antenna. It equipped with a variety of software and connectivity options, allowing it to be easily integrated with existing systems and workflows. The AT907 by ATID stands as a pinnacle in RFID technology, designed to elevate your tracking and identification processes to unprecedented levels of efficiency and accuracy. This handheld RFID reader empowers businesses across diverse sectors with its advanced capabilities and user-friendly interface. With its compact yet robust design, the AT907 is your indispensable tool for streamlined operations and enhanced productivity.